Composite 3D PrinterThermo Plastic 3D PrinterCNC RouterUniversal Testing Machine (UTM)
About the Laboratory
The Advanced Materials Application Laboratory (AMAL) is a multidisciplinary hub specializing in the end-to-end development—from synthesis, characterization to processing and real-world implementation—of advanced structural and functional materials. By blending engineering requirements with fundamental materials science, the facility effectively connects design and manufacturing with real-world performance.
AMAL supports research across a broad spectrum of domains, including functional materials, nanomaterials, polymers, composites, etc. Its research footprint spans structural synthesis, microstructural analysis, mechanical evaluation, and structural analysis. Driven by a commitment to sustainability and high performance, the laboratory aims to deliver key innovations/solutions for the aerospace, automotive, clean energy, biomedical, and smart manufacturing industries, ultimately fostering technological progress and strengthening the Institute’s research ecosystem.
Capabilities
The laboratory supports research and development in the following areas:
Advanced Materials: Structural and functional materials.
Nanomaterials: Materials research at the nanoscale.
Polymers and Composites: Development and processing of polymer-based and composite materials.
Materials Characterization: Investigation of material structure and microstructure.
Mechanical Testing: Evaluation of mechanical properties and material performance.
Advanced Manufacturing: Additive manufacturing and CNC-based material processing.
Major Laboratory Equipment
AMAL is equipped with facilities that support material fabrication, processing, and mechanical evaluation.
Composite 3D Printer: Supports additive manufacturing of composite components and material structures.
Thermo Plastic 3D Printer: Enables the fabrication of polymer-based components through additive manufacturing.
CNC Router: Facilitates computer-controlled machining, cutting, and shaping of suitable materials.
Universal Testing Machine (UTM): Supports mechanical testing of materials and specimens to evaluate their mechanical properties. Specific test capabilities depend on the machine configuration.
The Material Testing Laboratory (MT Laboratory) is a dedicated facility for teaching, experimental investigation, and research on the mechanical behaviour of engineering materials. It provides students and researchers with hands-on experience in evaluating material properties under different loading conditions and in studying stress, deformation, strength, toughness, fatigue, and wear.
Equipped with a range of mechanical testing instruments, the laboratory supports practical learning and applied research in materials science and mechanical engineering.
Testing and Research Capabilities
The laboratory provides facilities for the following areas of investigation:
Tensile, Compressive, and Flexural Testing: Evaluation of the mechanical response of materials using Universal Testing Machines (UTMs).
Multiaxial Testing: Investigation of material behaviour under biaxial and complex stress conditions.
Impact and Hardness Testing: Assessment of impact toughness and resistance to indentation using established testing methods.
Fatigue Testing: Study of material behaviour under repeated and cyclic loading.
Torsion and Spring Testing: Investigation of torsional response, shear behaviour, and spring compression characteristics.
Stress Analysis and Photoelasticity: Experimental visualization and analysis of stress distribution under loading.
Digital Image Correlation (DIC): Optical measurement of deformation and displacement using a DIC system integrated with a 100 kN Universal Testing Machine.
Erosion and Wear Studies: Experimental investigation of material erosion using a gas jet erosion testing facility with a high-temperature module.
Major Equipment and Facilities
The laboratory houses a variety of testing machines and experimental setups for mechanical characterization and materials research.
Universal Testing Machines
100 kN Universal Testing Machine
5 kN Universal Testing Machine
Digital Image Correlation (DIC) System integrated with the 100 kN UTM
These facilities support mechanical testing and the investigation of material deformation and response under applied loads.
Specialized Mechanical Testing
Biaxial Testing Machine
Pendulum Impact Testing Machine with digital display
Rotary Bending Fatigue Testing Machine with data acquisition system
Torsion Testing Machine (220 N·m capacity)
Spring Compression Testing Machine
These instruments support experimental studies of material strength, impact response, fatigue behaviour, torsional response, and spring characteristics.
Hardness Testing
Rockwell Hardness Tester
Brinell Hardness Tester
Vickers Hardness Testing Machine
These instruments facilitate the evaluation of material hardness using different indentation-based testing methods.
Experimental Stress Analysis and Advanced Testing
Photoelastic Bench with Transmission Polariscope
Demonstration Kit for Symmetrical and Unsymmetrical Bending
Gas Jet Erosion Testing Machine with high-temperature module
These facilities support the study of stress distribution, bending behaviour, and material erosion under specified experimental conditions.
The laboratory provides an environment for strengthening experimental skills, understanding mechanical behaviour, and conducting application-oriented studies of engineering materials.
Laboratory Team
Professors-in-Charge (PIC):
Prof. Arun Kumar Pradhan
Dr. Mahendaran Uchimali
Associated Technical Staff:
Mr. Alok Kumar Nayak — ATO
Mr. Bivudatta Mohanty — JTS
Mr. Debendra Kumar Nayak — JT
×
Advance Manufacturing Laboratory (AM)
Details coming soon.
×
Advanced Thermal Engineering Laboratory (ATE)
Computer Controlled Combined Refrigeration, Air Conditioning and Heat Pump UnitVapour Absorption Refrigeration SystemVortex Tube Refrigeration Unit
About the Laboratory
The Advanced Thermal Engineering Laboratory at the School of Mechanical Sciences provides a comprehensive platform for experimental learning and research in thermal engineering, thermodynamics, refrigeration, and energy systems.
The laboratory supports undergraduate (UG) and postgraduate (PG) academic programmes, particularly the B.Tech. in Mechanical Engineering and M.Tech. in Thermal Science and Engineering, as well as research activities by scholars. Through hands-on experiments and systematic performance evaluation, the laboratory facilitates a practical understanding of thermodynamic principles and their applications in engineering systems.
Laboratory Capabilities and Facilities
The laboratory enables experimental investigations of thermodynamic cycles, multistage air compression, refrigeration systems, and energy-conversion processes.
Its major capabilities include:
Air Compressor Performance Evaluation: Experimental evaluation of reciprocating air compressors under different pressure conditions.
Refrigeration System Analysis: Determination and comparison of experimental and theoretical Coefficients of Performance (COP) of refrigeration systems.
Vapour Absorption Refrigeration: Experimental assessment of vapour absorption refrigeration systems.
Expansion Device Analysis: Investigation of the influence of capillary tube geometry and diameter on refrigeration performance.
Thermodynamic Cycle Studies: Practical investigation of thermodynamic cycles and their performance characteristics.
Experimental Measurement and Analysis: Development of skills in system operation, experimental measurements, performance analysis, and thermodynamic evaluation.
These activities strengthen the connection between theoretical concepts and real-world engineering applications while developing students’ practical and analytical skills.
Major Laboratory Equipment
Two-Stage Reciprocating Air Compressor Test Rig
This facility supports experimental investigations of multistage air compression and the performance of reciprocating air compressors under different pressure conditions. Applications: Compressor performance evaluation, multistage compression studies, and thermodynamic analysis.
Vapour Compression Refrigeration Systems
The laboratory houses simple and multiple evaporator–condenser vapour compression refrigeration systems for experimental studies of refrigeration cycle performance. Applications: Refrigeration cycle analysis, COP determination, and performance evaluation.
Vapour Absorption Refrigeration System
The vapour absorption refrigeration unit facilitates experimental investigation of absorption-based refrigeration processes and their operating characteristics. Applications: Study and performance assessment of vapour absorption refrigeration systems.
Capillary Tube-Based Refrigeration Setups
The laboratory includes vapour compression refrigeration setups equipped with capillary tubes of varying diameters. These facilities allow students to investigate how expansion device geometry influences refrigeration system performance. Applications: Comparative evaluation of refrigeration performance using different capillary tube diameters.
Computer-Controlled Combined Refrigeration, Air Conditioning and Heat Pump Unit
This integrated facility supports practical exposure to refrigeration, air conditioning, and heat pump systems through experimental operation and performance evaluation.
Vortex Tube Refrigeration Unit
The vortex tube refrigeration unit provides a facility for studying vortex tube-based cooling and its operating characteristics.
Laboratory Team
Professor-in-Charge:
Dr. K.S Ramanujam
Dr. Maneesh Punetha
Associated Technical Staff:
Mr. Malay Kumar Routray — ATO
Mr. Dillip Kumar Sahoo — JTS
Mr. Salo Kumar Murmu — JT
×
Artificial Intelligence and Mechatronics Laboratory (AIM)
Details coming soon.
×
Casting Welding Forming Laboratory (CWF)
Details coming soon.
×
Central Workshop (CWS)
Details coming soon.
×
Computational Research Laboratory (CR)
Details coming soon.
×
Computer Aided Design Laboratory (CAD)
Details coming soon.
×
Energy Systems Laboratory (ESL)
PCM Based Solar ExperimentParabolic Trough CollectorTwo-Phase Immersion Cooling Based Battery Thermal Management System
About the Laboratory
The Energy Systems Laboratory (ESL) at the School of Mechanical Sciences is dedicated to experimental education, performance evaluation, and research in renewable energy technologies, thermal energy storage, and advanced energy conversion systems.
The laboratory supports undergraduate (UG) and postgraduate (PG) academic programmes, particularly the M.Tech. programme in Thermal Science and Engineering, as well as research activities by scholars. It provides a comprehensive platform for hands-on learning and experimental investigation of sustainable energy technologies, with emphasis on energy efficiency, renewable energy integration, and the development of innovative energy solutions.
Through its diverse experimental facilities, the laboratory aims to strengthen students’ practical understanding of energy systems while facilitating advanced research in emerging areas of sustainable energy engineering.
Research Capabilities
The Energy Systems Laboratory supports experimental investigations and research in the following areas:
Thermal Energy Storage: Experimental studies of sensible and latent heat storage systems, including different storage configurations.
Solar Thermal Energy: Performance evaluation of solar thermal technologies and solar energy collection systems.
Wind Energy Systems: Design, testing, and performance analysis of wind turbines and wind power generation systems.
Hybrid Renewable Energy Systems: Investigation of integrated wind–solar photovoltaic (PV) hybrid energy systems.
Fuel Cell Technology: Experimental characterization and performance evaluation of fuel cells.
Battery Performance and Thermal Management: Evaluation of battery performance and investigation of thermal management systems.
Thermoelectric Energy Conversion: Experimental studies of thermoelectric generators (TEGs) and their energy conversion characteristics.
Thermoelectric Refrigeration: Investigation of thermoelectric refrigeration systems and their cooling performance.
The laboratory offers a wide range of experimental facilities for investigating the performance, efficiency, and operational characteristics of sustainable energy systems.
Its capabilities include experimental investigation and performance assessment of thermal energy storage systems, solar thermal technologies, wind energy systems, and advanced energy conversion devices. The laboratory supports studies on sensible and latent heat storage, solar energy collection, wind power generation, and wind–solar PV hybrid systems.
Additional capabilities include fuel cell characterization, battery performance evaluation, and experimental investigations of thermoelectric generators and thermoelectric refrigeration systems.
These facilities enable students and researchers to examine thermal storage behaviour, renewable energy conversion, system performance, and electro-thermal characteristics under different operating conditions. They also provide opportunities for practical skill development and advanced research in sustainable energy systems and emerging energy technologies.
Major Laboratory Equipment and Facilities
The Energy Systems Laboratory is equipped with a range of experimental setups and test facilities to support academic instruction and research in renewable energy and advanced energy conversion technologies.
Thermal Energy Storage Experimental Setups
The laboratory houses sensible and latent heat thermal energy storage (SHTES and LHTES) experimental setups in single, cascade, and concentric configurations. These facilities support experimental studies of thermal energy storage behaviour and performance.
The setups are integrated with flat-plate and parabolic-trough solar collectors to facilitate investigations into solar thermal energy collection and storage applications.
Solar Thermal Energy Facilities
The laboratory is equipped with solar thermal experimental facilities, including:
Flat-plate solar collector
Parabolic-trough solar collector
Phase Change Material (PCM)-based solar experimental setup
These facilities support experimental investigations of solar energy collection, thermal storage, and solar thermal system performance.
Wind Energy and Hybrid Renewable Energy Systems
The laboratory includes test benches for wind turbine design and performance analysis, along with experimental facilities for wind–solar photovoltaic (PV) hybrid energy systems.
These facilities enable investigations into renewable power generation and the performance of integrated renewable energy systems.
Fuel Cell and Battery Testing Facilities
The laboratory provides dedicated test facilities for fuel cell characterization and battery performance evaluation. These facilities support experimental studies of electrochemical energy conversion and energy storage technologies.
A two-phase immersion cooling-based battery thermal management system is also available for experimental investigation of battery thermal management.
Thermoelectric Energy Conversion and Refrigeration
The laboratory is equipped with thermoelectric generator (TEG) test setups and thermoelectric refrigeration systems. These facilities support the evaluation of thermoelectric energy conversion and cooling performance.
Selected Experimental Facilities
The following experimental facilities represent some of the key infrastructure available in the Energy Systems Laboratory.
PCM-Based Solar Experiment
The PCM-based solar experimental facility supports investigations into phase change material-based thermal energy storage and its application in solar thermal systems.
Parabolic-Trough Solar Collector
The parabolic-trough collector provides an experimental platform for studying solar thermal energy collection and the performance of concentrating solar collector systems.
Two-Phase Immersion Cooling-Based Battery Thermal Management System
This facility supports experimental investigations of battery thermal management using two-phase immersion cooling, with emphasis on the thermal behaviour of battery systems.
The Heat Transfer Laboratory provides a comprehensive learning and research environment for undergraduate (UG) and postgraduate (PG) students to develop a strong understanding of thermal sciences through experimental investigations, measurement techniques, instrumentation, and practical problem-solving.
The laboratory bridges theoretical concepts with practical applications in thermal engineering, offering hands-on experience in heat transfer processes and thermal measurement systems. It also serves as a platform for advanced research in emerging thermal management technologies and energy-efficient engineering systems.
Laboratory Capabilities
The laboratory supports experimental investigations and research in the following areas:
Heat Conduction: Experimental study of heat transfer through solid materials and evaluation of thermal behaviour.
Convection: Investigation of convective heat transfer and thermal performance under different operating conditions.
Heat Exchangers: Experimental evaluation of heat exchanger performance and thermal characteristics.
Boiling and Condensation: Experimental studies of phase-change heat transfer processes.
Thermal Measurements and Instrumentation: Temperature measurement, instrumentation, and calibration of laboratory-fabricated thermocouples.
Data Acquisition and Experimental Analysis: Collection, processing, and analysis of experimental data, including experimental uncertainty analysis.
Thermal Property Characterization: Measurement and characterization of thermal properties of materials.
The laboratory also supports advanced research in two-phase heat transfer, immersion cooling, battery thermal management, and advanced heat sink design, addressing contemporary challenges in electronics cooling, energy storage, and thermal management.
Major Laboratory Equipment
Heat Transfer Experimental Setups
The laboratory houses experimental setups for investigating heat conduction and convection, enabling students to study fundamental heat transfer mechanisms and evaluate thermal performance under controlled experimental conditions.
Heat Exchanger Test Rigs
Heat exchanger test rigs facilitate experimental studies of heat exchange processes and the evaluation of thermal system performance.
Shell-and-Tube Flooded Evaporator
The Shell-and-Tube Flooded Evaporator supports experimental investigations related to evaporative heat transfer and phase-change thermal processes.
Thermal Conductivity Analyser
The Thermal Conductivity Analyser is used to characterize the thermal conductivity of materials, supporting experimental studies of heat transport and material thermal properties.
Differential Scanning Calorimeter (DSC)
The Differential Scanning Calorimeter supports the characterization of thermal properties of materials and investigations of their thermal behaviour.
Thermocouple Bead Preparation and Calibration Setup
This facility enables the preparation and calibration of laboratory-fabricated thermocouples for temperature measurement. It supports practical training in thermal instrumentation, measurement techniques, and calibration procedures.
Thermal Measurement and Data Acquisition Systems
Supporting facilities for thermal measurement, data acquisition, and experimental analysis enable systematic investigations, accurate data collection, and evaluation of thermal performance.
Laboratory Team
Professor-in-Charge:
Prof. Mihir Kumar Das
Dr. Sashidhar Kondaraju
Associated Technical Staff:
Mr. Malay Kumar Routray — ATO
Mr. Dillip Kumar Sahoo — JTS
Mr. Debendra Naik — JT
×
Internal Combustion Engines (ICE) Laboratory
High-Speed Visualization of Spray InjectionLaminar Flame Speed Using Schlieren VisualizationSwirl Combustion SetupFour-Stroke, Four-Cylinder MPFi Petrol Engine SetupEngine Cut-Section Working ModelEngine Cut-Section Working ModelEngine Cut-Section Working Model
About the Laboratory
The I.C. Engines Laboratory provides a comprehensive platform for undergraduate (UG) and postgraduate (PG) students to develop practical knowledge of internal combustion engines and for researchers to pursue advanced investigations in combustion science and future propulsion technologies.
The laboratory focuses on understanding fundamental combustion phenomena and developing innovative solutions for cleaner, more efficient, and sustainable energy-conversion systems. Its research activities emphasize sustainable alternative fuels and advanced combustion technologies to address emerging challenges in engine performance, exhaust emissions, and energy efficiency.
Through a combination of experimental investigations, advanced diagnostic techniques, and computational modelling, the laboratory supports student learning, fundamental research, and the development of next-generation combustion and propulsion systems.
Teaching and Research Capabilities
The laboratory supports experimental and analytical investigations in the following areas:
Engine Performance and Combustion: Investigation of engine performance, combustion characteristics, and combustion stability under different operating conditions.
Alternative and Sustainable Fuels: Research on alternative fuels and their potential to improve energy efficiency and reduce emissions.
Fuel Injection and Spray Dynamics: Experimental study of fuel-injection processes, spray characteristics, and spray–combustion interactions.
Flame Propagation and Combustion Diagnostics: Investigation of flame behaviour and combustion phenomena using advanced optical diagnostic techniques.
Exhaust Emissions: Analysis of emission formation and investigation of approaches for cleaner engine operation.
Future Propulsion Technologies: Research aimed at improving the efficiency, sustainability, and performance of combustion-based energy-conversion systems.
The laboratory is equipped to conduct a wide range of experimental investigations into internal combustion engines and fundamental combustion processes.
Its capabilities include engine testing, combustion characterization, exhaust-emission measurement, fuel-injection analysis, spray visualization, flame diagnostics, and combustion-stability studies. The integration of engine instrumentation, precise flow control, high-speed imaging, advanced optical diagnostics, and computational modelling enables detailed investigations of combustion processes under different operating conditions.
These facilities provide an environment for hands-on student training, advanced experimental research, and the development of cleaner and more efficient combustion technologies.
Major Equipment
The laboratory houses a range of engine test facilities, combustion setups, and diagnostic instruments to support teaching and research.
Engine Test Facilities
Single-cylinder and multi-cylinder spark-ignition (SI) engines
Compression-ignition (CI) engines
Variable Compression Ratio (VCR) engine
Four-stroke, four-cylinder multi-point fuel-injection (MPFi) petrol engine setup
Optical engine
Engine instrumentation and testing systems
Combustion and Diagnostic Facilities
Spray-injection experimental facility
High-speed imaging and visualization systems
Schlieren visualization system for flame studies
Exhaust gas analysers
Digital mass flow controllers
Spectrometry facilities
Photomultiplier tube (PMT)-based diagnostic systems
Advanced optical diagnostic techniques
Cut-section engine models for instructional demonstrations
Together, these facilities enable comprehensive investigations of engine performance, fuel injection, spray behaviour, flame propagation, combustion processes, and exhaust emissions.
Selected Experimental Facilities
High-Speed Visualization of Spray Injection
The spray-injection facility supports the visualization and investigation of fuel-spray characteristics and injection processes. Such studies help researchers understand spray development and its interaction with combustion processes.
Laminar Flame Speed Using Schlieren Visualization
The Schlieren visualization facility enables optical observation of flame propagation. It supports experimental investigations of flame behaviour and fundamental combustion phenomena.
Swirl Combustion Setup
The swirl combustion setup provides a platform for investigating swirl-stabilized combustion and associated flame characteristics.
Four-Stroke, Four-Cylinder MPFi Petrol Engine Setup
This engine facility supports practical demonstrations and experimental studies of a multi-cylinder spark-ignition engine, including engine operation and performance-related investigations.
Cut-Section Engine Working Models
The cut-section engine models facilitate visual understanding of engine components, internal mechanisms, and operating principles. They support laboratory instruction and hands-on learning for students.
Laboratory Team
Professor-in-Charge:
Prof. Mihir Kumar Das
Dr. Amrit Bikram Sahu
Associated Technical Staff:
Mr. Malay Kumar Routray — ATO
Mr. Dillip Kumar Sahoo — JTS
Mr. Debendra Naik — JT
×
Machine Science and Surface Engineering Laboratory (MSSE)
The Metrology Laboratory at IIT Bhubaneswar provides essential facilities for precision measurement, dimensional inspection, and microstructural characterization of engineering materials and components. The laboratory supports teaching, research, and quality assessment activities by enabling the accurate examination of material surfaces, geometrical features, and microstructures.
The laboratory serves undergraduate and postgraduate students, doctoral researchers, and sponsored research projects in manufacturing and materials engineering. Equipped with advanced optical and imaging instruments, it offers hands-on exposure to modern measurement and characterization techniques, contributing to high-quality engineering education, precision engineering, and advanced materials research.
Facilities and Capabilities
The laboratory provides the following facilities:
Precision Measurement and Dimensional Inspection: Measurement and inspection of engineering components for dimensional accuracy and geometrical conformity.
Surface Morphology Analysis: Examination of machining marks, surface defects, fracture features, and small engineering components.
Microstructural Characterization: Study of grain structures, phases, inclusions, and processing-induced microstructural changes in metals and alloys.
Non-Contact Measurement: Measurement of component dimensions, contours, angles, and geometrical features.
Surface Wettability and Surface Energy Analysis: Evaluation of surface properties relevant to surface engineering, coatings, and functional materials.
Quality Assessment: Inspection and evaluation of precision-engineered components.
Academic and Research Support: Facilities for undergraduate and postgraduate laboratory courses, doctoral research, and sponsored projects.
Major Equipment
1. Stereo Zoom Microscope
The Stereo Zoom Microscope enables detailed observation of surface features and small engineering components with excellent depth perception and clarity. It is used to examine machining marks, surface defects, fracture surfaces, and component features. Applications: Surface inspection, defect observation, fracture analysis, and examination of small components.
2. Profile Projector
The Profile Projector facilitates accurate, non-contact measurement of component dimensions, contours, angles, and other geometrical features. It is particularly useful for the inspection of precision-engineered components in manufacturing and quality-control applications. Applications: Dimensional inspection, contour measurement, angle measurement, and geometrical verification.
3. Metallurgical Microscope
The Metallurgical Microscope supports detailed microstructural characterization of metals and alloys. It enables the observation of grain structures, phases, inclusions, and microstructural changes resulting from material processing. Applications: Metallurgical examination, microstructure analysis, and studies relating material processing to material performance.
4. Contact Angle Measurement Machine
The Contact Angle Measurement Machine is used to evaluate the wettability and surface energy of engineering materials and coatings. The facility supports investigations in surface engineering, coatings, functional materials, and advanced manufacturing processes. Applications: Contact-angle measurement, wettability evaluation, and surface-property studies.
Laboratory Team
Professor-in-Charge:
Dr Suman Deb
Dr. Chetan
Associated Technical Staff:
Mr. Aloka Kumar Nayak — ATO
Mr. Sunil Kumar Pradhan — JTS
Mr. Tushar Kanta Nayak — JT
×
Micro Fluidics Laboratory (MF)
Details coming soon.
×
Opto-Thermal Laboratory (OT)
Details coming soon.
×
Robo Vision Laboratory (RV)
Details coming soon.
×
Turbo Machinery Laboratory (TM)
Details coming soon.
×
Vibration Laboratory (VB)
Details coming soon.
Publications (Year-wise)
Year 2025
Journal Articles (55)
Indoor Transmission of Respiratory Diseases and Influencing Factors—A Critical Review, Arumuru, V., Yadav, H., Transactions of the Indian National Academy of Engineering, 2025, DOI: 10.1007/s41403-025-00530-w
Bio-inspired powder bed fusion 3D printed surfaces for enhanced critical heat flux and boiling heat transfer, Laskar, N., Pancholi, R., Das, M.K., International Journal of Heat and Mass Transfer, 2025, DOI: 10.1016/j.ijheatmasstransfer.2024.126296
Experimental investigation of hygrothermal ageing on fracture and crushing behaviour of fibre reinforced composite structures, Budarapu P.R., Devaraj, S., Sastry, Y.B.S., International Journal of Hydromechatronics, 2025, DOI: 10.1504/IJHM.2025.145779
Interferometric Study of Transient Natural Convection in Open Enclosure with Square Obstacle, Kumar, S., Mahapatra, S.K., Ray, S., Heat Transfer Engineering, 2025, DOI: 10.1080/01457632.2025.2473781
Experimental Investigation of Two-Phase Heat Transfer over Partially Roughed Vertical Tube, Sha, B.B., Das, M.K., Journal of Enhanced Heat Transfer, 2025, DOI: 10.1615/JEnhHeatTransf.2024054088
Harnessing Myriostachia Wightiana Stems for Sustainable Composite Applications: Physicochemical Characterization and Mechanical Performance, Parida, P.K., Pandit, M.K., Pradhan, A.K., Mechanics of Composite Materials, 2025, DOI: 10.1007/s11029-025-10292-9
A Kriging-Based Uncertainty Quantification for Fracture Assessment, Budarapu P.R., Nguyen, T.C. H., Vu-Bac N., International Journal of Computational Methods, 2025, DOI: 10.1142/S0219876224500452
Experimental Study of Pool Boiling Characteristic of Al2O3-coated Aluminum Surfaces, Laskar, N. et al., Journal of Environmental Nanotechnology, 2025, DOI: 10.13074/jent.2025.06.251485
Performance and Life Analysis of Lithium-Ion Batteries Aided by Data-Driven Analysis, Deshpande, A., Budarapu, P.R., et al., International Journal of Mechanical System Dynamics, 2025, DOI: 10.1002/msd2.70014
Thermo-Mechanical Investigation on Hot Deformation Behavior of Cast Magnesium–Aluminum Alloy: Experimental and Constitutive Analysis, Ranjan, S., Kumar, V., Deb, S., et al., Journal of Materials Engineering and Performance, 2025, DOI: 10.1007/s11665-025-11852-9
Synthetic Jet Integrated in Phase Change Material Based Heat Sink: A Novel Compact Thermal Management Device for Electronic Cooling, Nandan, R., Arumuru, V., Das, M.K., Energy Conversion and Management, 2025, DOI: 10.1016/j.enconman.2025.120741
Aeroelastic Stability Enhancement of Composite Laminates Using Embedded Pre-Strained NiTi Shape Memory Alloys, Budarapu, P.R. et al., Experimental Techniques, 2025, DOI: 10.1007/s40799-025-00846-w
Environment friendly salt free recycling of aluminum chips via liquid state processing route for better sustainability, Deb, S. et al., Journal of Environmental Management, 2025, DOI: 10.1016/j.jenvman.2025.127578
The economical and reliable image free navigation system for acetabular cup implantation in total hip arthroplasty, Mahapatra, M.M., Jain, D., et al., Journal of Clinical Orthopaedics and Trauma, 2025, DOI: 10.1016/j.jcot.2025.102991
Investigating hemodynamic effects of consecutive arterial stenoses using an Eulerian granular two-phase model, Das, S.S., Abhiram, D., Mahapatra, S.K., Journal Of Non-Newtonian Fluid Mechanics, 2025, DOI: 10.1016/j.jnnfm.2025.105508
Physics informed neural network-based framework for two-dimensional phase change problems, Patra, S., Rath, P., Bhattacharya, A., et al., Computer Physics Communications, 2025, DOI: 10.1016/j.cpc.2025.109854
Contact of an inflated circular magnetoelastic membrane with a rigid substrate under magnetic actuation, Nanda, P., Roychowdhury, S., Mechanics of Materials, 2025, DOI: 10.1016/j.mechmat.2025.105503
Fluid sloshing augmented parametric excitation for enhanced piezoelectric vibration energy harvesting, Roychowdhury, S., Sahoo, P.K., Arumuru, V., Sensors and Actuators A-Physical, 2025, DOI: 10.1016/j.sna.2025.117061
A Hybrid Computational Flow-Induced Noise and Phase-Conjugation Techniques for Low Reynolds Numbers, Kumar, S., Bhumkar, Y.G., et al., Acoustics Australia, 2025, DOI: 10.1007/s40857-025-00361-3
Near field flow dynamics of coaxial jet impingement heat transfer, Samantaray, S.S., Arumuru, V., International Communications in Heat and Mass Transfer, 2025, DOI: 10.1016/j.icheatmasstransfer.2025.109580
Prospects of hybrid cooling technologies for thermal management of electronic gadgets: A review, Nandan, R., Arumuru, V., Das, M.K., International Journal of Heat and Mass Transfer, 2025, DOI: 10.1016/j.ijheatmasstransfer.2025.127766
Experimental and Numerical Analysis of Residual Stress in Dissimilar Weld Joints Between Grade 91 and 316LN Steels Using Inconel 82 Filler, Mahapatra, M. M. et al., Journal of Materials Engineering and Performance, 2025, DOI: 10.1007/s11665-025-12010-x
Experimental investigations of droplet impact on a sessile droplet, Pandey, S.K., Kondaraju, S., Physics of Fluids, 2025, DOI: 10.1063/5.0286698
A facile approach for wettability transition to enhance the hydrophobicity of Ti6Al4V alloy using laser surface texturing, Prasanthi, B., Chetan, Kumar, A., Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, 2025, DOI: 10.1177/09544089251333154
Extraction of kaolin and tribo informative analysis of the Al-kaolin composite through machine learning approaches, Venkatesh, V. S. S., Vundavilli, P.R., Mahapatra, M.M., Scientific Reports, 2025, DOI: 10.1038/s41598-025-97782-x
Synergistic effects of hydrofluoric acid on the purification of maize-derived graphite powder, Venkatesh, V. S. S., Vundavilli, P.R., Mahapatra, M.M., et al., Vacuum, 2025, DOI: 10.1016/j.vacuum.2025.114325
Localised Electrochemical Additive Manufacturing via Microjet Electrochemical Deposition, Patel, D. et al., Journal of the Electrochemical Society, 2025, DOI: 10.1149/1945-7111/adcd01
Beat of sound generated from NACA0012 airfoil on application of suction-blowing excitation, Kumar, S., Bhumkar, Y.G., Journal of the Acoustical Society of America, 2025, DOI: 10.1121/10.0036698
Prismatic bifurcation of electro-mechanically loaded stacked di-electric, Patra, S., Roychowdhury, S., International Journal of Non-Linear Mechanics, 2025, DOI: 10.1016/j.ijnonlinmec.2025.105119
Critical review of heat exchangers for thermal energy storage (TES) and conservation systems, Das, M.K. et al., Journal of Thermal Analysis and Calorimetry, 2025, DOI: 10.1007/s10973-025-14408-0
State of the art 3D printed heat sink with a combination of multiple discretely located honeycomb structures with phase change material for enhanced cooling of electronic gadgets, Andhare, Y.M., Nandan, R., Arumuru, V., Das, M.K., et al., International Journal of Heat and Mass Transfer, 2025, DOI: 10.1016/j.ijheatmasstransfer.2025.127356
Development of coupled thermoelastic discrete model for thermal shock cracking in brittle materials: Parametric analysis of crack patterns and material properties, Uchimali, M., Vedantam, S., Ananchaperumal, V., Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2025, DOI: 10.1016/j.msea.2025.148600
Correlation of microstructure and phase formation with molten pool thermal history for in-situ and ex-situ laser cladding of TiC/Inconel 625 MMC coating, Kumar, S., Mullick, S., Bhatnagar, S., Journal of Laser Applications, 2025, DOI: 10.2351/7.0001757
In-plane load induced buckling behavior of laminated doubly curved shells based on a modified higher order zigzag theory, Alam, M.I., Pandit, M.K., Pradhan, A.K., Mechanics Based Design of Structures and Machines, 2025, DOI: 10.1080/15397734.2025.2538093
Schwarzite-inspired hybrid cellular structures for energy absorption applications, Udaysankar, V., Budarapu, P.R., et al., European Journal of Mechanics A-Solids, 2025, DOI: 10.1016/j.euromechsol.2025.105775
Nonlinear Dynamics of Nitinol-Enhanced Carbon-Fiber-Reinforced Polymer Beam-Rod in Subsonic Flow, Budarapu, P.R. et al., Journal of Aircraft, 2025, DOI: 10.2514/1.C038325
A critical analysis of correlations for saturated nucleate pool-boiling heat transfer over vertical tubes and tube bundles: Development of improved models, Sha, B.B., Das, M.K., Mohanty, R.L., Progress in Nuclear Energy, 2025, DOI: 10.1016/j.pnucene.2025.105893
Inflated circular membrane in contact with finite indentors of different geometries, Chiranjib, C., Sahu, S., Roychowdhury, S., Acta Mechanica Sinica, 2025, DOI: 10.1007/s10409-024-24613-x
Exploring Acoustic and Sound Wave Propagation Simulations: A Novel Time Advancement Method for Homogeneous and Heterogeneous Media, Kumar, Shashi, Ramcharan, Bangaru, et al., Advances in Applied Mathematics and Mechanics, 2025, DOI: 10.4208/aamm.OA-2023-0195
Performance study of cooling plates with single and double outlets for lithium-ion battery thermal management system based on topology optimization, Patra, Sanjeet, Chandra K, Parthiv, et al., International Journal of Green Energy, 2025, DOI: 10.1080/15435075.2023.2253886
A comparative analysis of the impact of fillet weld geometry on residual stress distribution in nickel-based superalloy, Kumar, R., Mahapatra, M.M., Pradhan, A.K., International Journal on Interactive Design and Manufacturing, 2025, DOI: 10.1007/s12008-024-02127-z
Static and dynamic analysis of a hyperelastic toroidal air-spring structure, Sahu, S., Roychowdhury, S., European Journal of Mechanics, A/Solids, 2025, DOI: 10.1016/j.euromechsol.2024.105461
Synergistic effect of sintering temperature on microstructure, mechanical properties, and fractography analysis of spark plasma sintered Al-10 %SiC-4 %Kaoline composite, Venkatesh, V.S.S., Ranga Vundavilli, P., Mahapatra, M.M., Materials Letters, 2025, DOI: 10.1016/j.matlet.2024.137625
Effect of discrete and continuous texture geometries on tool wear and derivative cutting effect during the machining, Roushan, A., Chetan, Wear, 2025, DOI: 10.1016/j.wear.2025.205964
Optimization of spark plasma sintered parameters of Al–SiC–kaolin hybrid composite using Taguchi–grey relational analysis, Venkatesh V.S.S., et al., Bulletin of Materials Science, 2025, DOI: 10.1007/s12034-024-03378-y
Modelling Delamination of Elastic Layers from Shape Memory Alloy Substrates, Uchimali, Mahendaran, et al., Shape Memory and Superelasticity, 2025, DOI: 10.1007/s40830-024-00518-5
Inflation of a toroidal membrane within a fluid-filled elastic spherical enclosure, Sahu, S., Roychowdhury, S., Thin-Walled Structures, 2025, DOI: 10.1016/j.tws.2024.112729
Phase difference effects on synthetic jet array flow: A proper orthogonal decomposition study, Pasa, J., Arumuru, V., Physics of Fluids, 2025, DOI: 10.1063/5.0243917
Structural damage identification through variations in modal quantities using modal strain energy and mode shape curvature methods, Barma, N.S., Dhandole, S.D., Saravanan, T.J., Innovative Infrastructure Solutions, 2025, DOI: 10.1007/s41062-024-01796-9
Heat transfer enhancement in falling liquid films on an array of horizontal tubes with plasma spray porous coating, Pecherkin, N.I., Volodin, O.A., Das, M.K., …, Kataev, A.I., Mironova, I.B., Applied Thermal Engineering, 2025, DOI: 10.1016/j.applthermaleng.2024.125288
Globally optimized dynamic mode decomposition: A first study in particulate systems modelling, Gupta, A., Mishra, B.K., Theoretical and Applied Mechanics Letters, 2025, DOI: 10.1016/j.taml.2024.100563
Honeycomb-spiderweb-inspired self-similar hybrid cellular structures for impact applications, Tewari, K., Pandit, M.K., Mahapatra, M.M., Budarapu, P.R., et al., Defence Technology, 2025, DOI: 10.1016/j.dt.2024.06.015
Exploring Acoustic and Sound Wave Propagation for Homogeneous and Heterogeneous Media, Kumar, S., Ramcharan, B., Yadav, VS., Singh, A., et al., Advances in Applied Mathematics and Mechanics, 2025, DOI: 10.4208/aamm.OA-2023-0195xxx2024
Conference Proceedings (9)
Impact of Voids on Ampacity in High-Voltage Power Cables: A Multiphysical Approach, Chattopadhyay, T., Das, S, 2025 International Conference on Power Electronics Converters for Transportation and Energy Applications, PECTEA 2025, 2025, DOI: 10.1109/PECTEA61788.2025.11076373
Effect of Pilot Hole on Micro Drilling Characteristics of a Ni-Based Superalloy, Azim, S., Gangopadhyay, S., Mahapatra, S.S., Proceedings of ASME 2025 20th International Manufacturing Science and Engineering Conference, MSEC 2025, 2025, DOI: 10.1115/MSEC2025-151474
Experimental Investigation on the Mechanical Properties of Graphene Coated Carbon Fiber Composites, Pavada, K., Chatla, S.R., Sahoo, S.R., ASME 2025 International Mechanical Engineering Congress and Exposition, IMECE 2025, 2025, DOI: 10.1115/IMECE-INDIA2025-162168
Energy-Efficient Controllers for Quadcopters: A Comparative Study of PID, LQR, and MPC, Garg, B., Kubal, P.C., Sahoo, S.R., ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2025, DOI: 10.1115/IMECE-INDIA2025-162721
Prediction of Regional Heat Waves Using a Hybrid LSTM Approach, Joshi, Y., Kannan, S.R., ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2025, DOI: 10.1115/IMECE-INDIA2025-159725
Effect of Nose Cone Geometry on the Performance of Gas Turbines, Mahapatra, M.M., Panda, S.K., Panigrahy, S., Shah, H., et al., ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2025, DOI: 10.1115/IMECE-INDIA2025-160742
Dynamics of Clear Sky Index of Solar Insolation, Suprabhat Prasad, M.V., Kannan, S.R., ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2025, DOI: 10.1115/IMECE-INDIA2025-159894
Mitigating tonal noise with suction-blowing excitation on naca0012 airfoil at low reynolds numbers, Kumar, S., Bhumkar, Y.G., Proceedings of the International Congress on Sound and Vibration, 2025, DOI: Not available
Natural Luffa Fiber Composite: A Path to Sustainable Resource Deployment, Parida, P.K., Alam, M.I., Gogoi, D., Pradhan, A.K., Pandit, M.K., Lecture Notes in Civil Engineering, 2025, DOI: 10.1007/978-981-97-7846-1_24
Book Chapters (5)
Applications to Dynamic Behavior: Free Vibration Analysis of Functional Composites, Gogoi, D., Parida, P.K., Alam, Md. I., Pandit, M.K., Pradhan, A.K., et al., Functional Composites: the Role in Modern Engineering, 2025, DOI: 10.1002/9781394242030.ch8
Case Studies Related to the Tribological Performance of Reinforced Metal Matrix Composites: Comparative Analysis of Machine Learning Models for Predicting Wear Rates in AA7075/SiC Composite, Venkatesh V.S.S.Manohar, G., Vaishali, Micro-and Nanocomposites A Tribological Viewpoint, 2025, DOI: 10.1201/9781003530909-14
Polymer Materials Properties and Characterization Study with Focus on Sustainability, Parida, P.K., Alam, Md. I., Gogoi, D., Pradhan, A.K., Pandit, M.K., et al., Advanced Functional and Composite Materials: Fabrication, Characterization, and Applications, 2025, DOI: 10.1201/9781003664611-4
Influence of Fumed Silica Nano-Filler and Stacking Sequence on Solid Particle Erosion Response of Bidirectional Jute-Kevlar Hybrid Composites, Parida, P.K., Pandit, M.K., Pradhan, A.K., Springer Proceedings in Materials, 2025, DOI: 10.1007/978-981-96-9513-3_20
Mechanical Properties and Behaviour of Functionally Graded Materials, Azim, S. et al., Novel Applications of Functionally Graded Materials, 2025, DOI: 10.1201/9781003656333-3
Other (Editorial) (1)
Special issue on: Data-driven computing for engineering analysis and design, Budarapu, P.R., Zhuang, X., Rabczuk, T., Engineering Analysis with Boundary Elements, 2025, DOI: 10.1016/j.enganabound.2025.106335
Year 2024
Journal Articles (69)
AI-Enhanced Insights: Advancing Corneal Endothelial Cell Analysis through Intelligent Cell Counting and Morphology Identification, Panda, S. K., Dash, A., et al., Investigative Ophthalmology & Visual Science, 2024, DOI: Not available
Role of residual stress in the failure of HF-ERW welded tubes, Kumar, R., Mahapatra, M. M., et al., Engineering Failure Analysis, 2024, DOI: 10.1016/j.engfailanal.2024.108342
A numerical approach to investigate the effect of various fluids on the performance of a heat pipe, Mohanty, R. L., Das, M. K., et al., Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2024, DOI: 10.1177/09544089231190157
Understanding tool chip interaction through experimental and numerical analysis during vibration assisted turning of AISI D3 steel, Dutta, P., Bartarya, G., Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2024, DOI: 10.1177/09544062231202583
Risk assessment of airborne virus transmission in an intensive care unit due to single and sequential coughing, Kusuluri, R., Mirikar, D., Palanivel, S., Arumuru, V., et al., Risk Analysis, 2024, DOI: 10.1111/risa.14133
Parametric modeling of resin-bonded sand mold systems using machine learning-based approaches, Khadanga, K. C., Vundavilli, P. R., et al., Engineering Research Express, 2024, DOI: 10.1088/2631-8695/ad6d2f
Free vibration behavior in functionally graded material plates with dual efficient quadrilateral finite elements, Gogoi, D., Pandit, M. K., Pradhan, A. K., Mechanics Based Design of Structures and Machines, 2024, DOI: 10.1080/15397734.2024.2348104
Impingement heat transfer enhancement by focusing the jet from synthetic jet array, Pasa, J., Neeruganti, V. S., Arumuru, V., International Communications in Heat and Mass Transfer, 2024, DOI: 10.1016/j.icheatmasstransfer.2024.107306
Expression of concern “Study on effect of double austenitization treatment on fracture morphology tensile tested nuclear grade P92 steel” [Eng. Fail. Anal. 96 (2019) 158–167], Mahapatra, M. M. et al., Engineering Failure Analysis, 2024, DOI: 10.1016/j.engfailanal.2024.108066
A Brief Review on Discrete Modelling of Martensitic Phase Transformations, Uchimali, M., Sittner, P., Shape Memory and Superelasticity, 2024, DOI: 10.1007/s40830-023-00466-6
Nano-size Particle Evolution During Heat Treatment of P91 Steel and Their Effect on Micro Hardness, Mahapatra, M. M. et al., Transactions of the Indian Institute of Metals, 2024, DOI: 10.1007/s12666-017-1215-6
Microstructure Evolution and Mechanical Properties of Dissimilar Welded Joint of P911 and P92 Steel for Subsequent PWHT and N&T Treatment, Saini, N., Pandey, C., Mahapatra, M. M., Transactions of the Indian Institute of Metals, 2024, DOI: 10.1007/s12666-017-1145-3
Characterization of Cast and Forged (C&F) Gr. 91 Steel in Different Heat Treatment Condition, Mahapatra, M. M. et al., Transactions of the Indian Institute of Metals, 2024, DOI: 10.1007/s12666-017-1144-4
FEM and experimental analysis to study the effect of tool wear on the surface integrity of finish hard turned EN31 steel, Bartarya, G., Choudhury, S. K., Sādhanā, 2024, DOI: 10.1007/s12046-024-02542-8
Effects of Working Temperature on Microstructure and Hardness of Ti-6Al-4V Alloy Subjected to Asymmetrical Rolling, Sahoo, P. S., Mahapatra, M. M., Vundavilli, P. R., et al., Journal of Materials Engineering and Performance, 2024, DOI: 10.1007/s11665-023-08076-0
Analysis of non-uniform laminar flow past a circular cylinder on the flow and sound field evolution using direct numerical simulation approach, Kumar, N., Kumar, S., Arumuru, V., Bhumkar, Y. G., et al., Acta Mechanica, 2024, DOI: 10.1007/s00707-023-03735-8
Experimental insights of boiling heat transfer over laser-engraved textured surfaces through bubble dynamics study, Kumar, A., Laskar, N., Das, M.K., International Communications in Heat and Mass Transfer, 2024, DOI: 10.1016/j.icheatmasstransfer.2024.108176
Thermodynamic investigation and 4Es analysis of a VCR diesel engine using emulsified diesel with catalytic co-pyrolysis fuel derived from waste LDPE and Pongamia pinnata seeds, Kumar Das, Mihir, et al., Process Safety and Environmental Protection, 2024, DOI: 10.1016/j.psep.2024.09.088
Unveiling the underlying physics of two-phase boiling heat transfer enhancement through shearing of coalescing bubbles, Laskar, N., Das, M.K., Physics of Fluids, 2024, DOI: 10.1063/5.0227551
Heat transfer characteristics of multiple jet impingements using graphene nanofluid for automobile industry application, Kumar Das, Mihir, et al., Thermal Science and Engineering Progress, 2024, DOI: 10.1016/j.tsep.2024.102993
Mechanical Properties and Tribological Study of Bottom Pouring Stir-Cast A356 Alloy Reinforced with Graphite Solid Lubricant Extracted from Corn Stover, Venkatesh, V.S.S., Vundavilli, P.R., Lubricants, 2024, DOI: 10.3390/lubricants12100341
Exploring Through-Thickness Residual Stress Distribution in Double V-Groove Multipass Welds of High-Strength Low-Alloy Steel and the Impact of Mechanical Restraints, Kumar, Rajiv, et al., Journal of Materials Engineering and Performance, 2024, DOI: 10.1007/s11665-024-10357-1
Role of surface charge convection on oblate droplets in different conductivity regimes, Basu, Himadri Sekhar, Jena, Santosh Kumar, Kondaraju, Sasidhar, Physics of Fluids, 2024, DOI: 10.1063/5.0225829
Control of the von Karman vortex street with focusing and vectoring of jet using synthetic jet array, Mittal, Vardhan, Arumuru, Venugopal, Physics of Fluids, 2024, DOI: 10.1063/5.0233485
An Experimental Study of Porous Coated Hybrid Elliptical Heating Tubes in Phase Change Heat Transfer, Mohanty, R.L., Das, M.K., ASME Journal of Heat and Mass Transfer, 2024, DOI: 10.1115/1.4065736
Integrated Anomaly Detection and Early Warning System for Forest Fires in the Odisha Region, Hiremath, H., Kannan, S.R., Atmosphere, 2024, DOI: 10.3390/atmos15111284
Control of aeolian tone from a square cylinder using periodic suction-blowing excitation at low Reynolds number using direct numerical simulation approach, Kumar, S., Bhumkar, Y.G., Physics of Fluids, 2024, DOI: 10.1063/5.0234414
Enhanced Boiling of Saturated Water over 2 × 3 AISI 304 Tube Bundles Coated with Diamond-Like Carbon for Two-Phase Heat Exchanger Applications, Laskar, N., Moharana, S., Das, M.K., ASME Journal of Heat and Mass Transfer, 2024, DOI: 10.1115/1.4065927
Temperature control of electronic gadgets using novel heat sink, Nandan, R., Arumuru, V., Das, M.K., International Communications in Heat and Mass Transfer, 2024, DOI: 10.1016/j.icheatmasstransfer.2024.108101
Eco-Friendly Vibration-Assisted Electrochemical Polishing of Surfaces Generated by Wire Electrical Discharge Machining, Dadi, S.S.O., Gururani, C., Garg, G.K., Patel, D., Journal of the Electrochemical Society, 2024, DOI: 10.1149/1945-7111/ad9527
Diffusion-based degradation in silicon photovoltaic solar cells, Singh, A., Budarapu, P.R., International Journal of Hydromechatronics, 2024, DOI: 10.1504/IJHM.2024.143186
Influence of amplitude and harmonic frequencies on the velocity of Faraday superwalkers, Pranav, P.P., Badvelu, P.P., Arumuru, V., Physics of Fluids, 2024, DOI: 10.1063/5.0241020
Influence of flow field and gas diffusion layer on polymer electrolyte membrane fuel cell performance, Sahu, I.P., Das, M.K., Soni, M.K., …, Himte, R.L., Ananat, T., Journal of Applied Research and Technology, 2024, DOI: 10.22201/icat.24486736e.2024.22.6.2614
Influence of mass flux ratio and phase difference on impingement heat transfer characteristics of coaxial synthetic jet, Sethi, C., Pasa, J., Panda, S., Arumuru, V., et al., International Journal of Heat and Mass Transfer, 2024, DOI: 10.1016/j.ijheatmasstransfer.2024.126075
Modification in airfoil's tonal noise using periodic suction-blowing excitation, Kumar, S., Bhumkar, YG., Journal of Sound and Vibration, 2024, DOI: 10.1016/j.jsv.2024.118495
An artificial neural network based deep collocation method for the solution of transient linear and nonlinear partial differential equations, Mishra, A., Budarapu, P.R., Vundavilli, P. R., et al., Frontiers of Structural and Civil Engineering, 2024, DOI: 10.1007/s11709-024-1011-4
3D FE adhesion failure analyses of adhesive bonded single lap joint made with functionally modulus graded curved adherends, Hari, V. et al., International Journal on Interactive Design and Manufacturing, 2024, DOI: 10.1007/s12008-024-01991-z
Multi-response Optimization of 3D Printed Parts with Triangular Patterns Using Nonlinear Machine Learning Regressor Technique, Tandon, S. et al., Journal of Materials Engineering and Performance, 2024, DOI: 10.1007/s11665-024-09869-7
Concomitant inhibitor-tolerant cellulase and xylanase production towards sustainable bioethanol production by Zasmidiumcellare CBS 146.36, Vundavilli, P.R., Khadanga, K.C., et al., Fuel, 2024, DOI: 10.1016/j.fuel.2024.132593
Design of computer vision assisted machine learning based controller for the Stewart platform to track spatial objects, Chauhan, D.K.S., Vundavilli, P.R., Frontiers of Structural and Civil Engineering, 2024, DOI: 10.1007/s11709-024-1086-y
Investigation of thermal-hydraulic performance of circular, elliptical & mixed circular-elliptical tube bundles for two-phase cross-flow boiling, Moharana, S., Joshi, A., Bhattacharya, A., Das, M.K., et al., International Journal of Heat and Mass Transfer, 2024, DOI: 10.1016/j.ijheatmasstransfer.2024.125970
Heat Transfer in Liquid Film Falling Down Vertical Cylinder with Single-Layer and Gradient Two-Layer Mesh Coatings, Das, M.K. et al., Journal of Engineering Thermophysics, 2024, DOI: 10.1134/S1810232824020036
An experimental investigation into PCM-integrated heat sinks under varying duty cycles, Nandan, R., Arumuru, V., Das, M., Journal of Energy Storage, 2024, DOI: 10.1016/j.est.2024.112905
Effect of electric field on melting characteristics of nano composite phase change material: A numerical study, Harichandan, S., Rath, P., Das, M.K., Applied Thermal Engineering, 2024, DOI: 10.1016/j.applthermaleng.2024.123835
Synergistic Effect of B4C and Multi-Walled CNT on Enhancing the Tribological Performance of Aluminum A383 Hybrid Composites, Raj, H., Vundavilli, P.R., et al., Lubricants, 2024, DOI: 10.3390/lubricants12060213
Effect of Obstacle Shape on Natural Convection in Partially Open Square Enclosure, Kumar, S., Mahapatra, SK., Heat Transfer Engineering, 2024, DOI: 10.1080/01457632.2024.2362540
Deep machine learning approaches for battery health monitoring, Singh, S., Budarapu, PR., Energy, 2024, DOI: 10.1016/j.energy.2024.131540
Drilling performance of Nickel-based Hastelloy C276 under mono and hybrid nanofluids environments, Panigrahi, DR., Chetan, GB., Journal of Manufacturing Processes, 2024, DOI: 10.1016/j.jmapro.2024.05.013
A topology optimization for design of double input-single output battery module liquid cooling plate with improved thermal performance, Chandra, K. Parthiv et al., Journal of Energy Storage, 2024, DOI: 10.1016/j.est.2024.112750
Heat transfer enhancement of different ribbing pitched semi-closed microstructure tube bundles fabricated by deformational cutting method, Das, M.K., Moharana, S., Laskar, N., et al., International Journal of Thermofluids, 2024, DOI: 10.1016/j.ijft.2024.100695
Corrigendum to “Study on effect of double austenitization treatment on fracture morphology tensile tested nuclear grade P92 steel” (Engineering Failure Analysis (2024) 158, (S1350630724001122), (10.1016/j.engfailanal.2024.108066)), Mahapatra M.M. et al., Engineering Failure Analysis, 2024, DOI: 10.1016/j.engfailanal.2024.108394
Investigation of thermo-hydraulics performance and vapour bubble behaviour over 5×3 smooth hybrid elliptical tube bundle under saturated cross flow boiling condition – An experimental study, Moharana, S., Bhattacharya, A., Das, M.K., International Journal of Heat and Mass Transfer, 2024, DOI: 10.1016/j.ijheatmasstransfer.2024.125677
Calculation of natural frequencies of doubly curved laminated shells using a modified higher order zigzag theory, Alam, M.I., Pandit, M.K., Pradhan, A.K., Thin-Walled Structures, 2024, DOI: 10.1016/j.tws.2024.112007
A Study on the Residual Stresses in Tungsten Inert Gas and Laser Welded Nitinol Superelastic Alloy, Mahapatra, M. M., Kumar, Rajeev, et al., Journal of Materials Engineering and Performance, 2024, DOI: 10.1007/s11665-024-09549-6
Computational Investigation of Glass Temperature Distribution in Parabolic Trough Solar Collector Relating to Humid Conditions, Mahapatra, Swarup K., Ray, Subhankar, et al., International Journal of Energy for a Clean Environment, 2024, DOI: 10.1615/InterJEnerCleanEnv.2023047216
Consequence of Red Blood Cells Deformability on Heat Sink Effect of Blood in a Three-Dimensional Bifurcated Vessel, Das, S.S., Mahapatra, S.K., Journal of Biomechanical Engineering, 2024, DOI: 10.1115/1.4065058
Thermo-mechanical characterizations and erosion wear studies of fumed silica-reinforced jute/epoxy composites, Parida, P.K., Alam, M.I., Ghosh, R., Pradhan, A.K., Pandit, M.K., et al., Journal of Reinforced Plastics and Composites, 2024, DOI: 10.1177/07316844241243152
A vasculature based nanocryosurgical model for tumor destruction, Verma, D.K., Rath, P., Bhattacharya, A., International Journal of Thermal Sciences, 2024, DOI: 10.1016/j.ijthermalsci.2024.109059
Comparative study of plaque surface temperature and blood heat transfer in a stenosed blood vessel with different symmetrical configurations, Das, S.S., Mahapatra, S.K., Computer Methods in Biomechanics and Biomedical Engineering, 2024, DOI: 10.1080/10255842.2024.2330701
Effect of ultrasonic vibration on microstructural evolution, clad defects, and surface properties in laser direct energy deposition of Inconel 625, Dash, BK., Bhatnagar, S., Magham, HSR., Rao, SB., Mullick, S., et al., Journal of Laser Applications, 2024, DOI: 10.2351/7.0001258
Micro-feature fabrication on SS304 stainless steel using WEDM process, Mohapatra, A., Dutta, P., Mullick, S., Bartarya, G., et al., Materials and Manufacturing Processes, 2024, DOI: 10.1080/10426914.2024.2323442
RETRACTION On study of effect of varying tempering temperature and notch geometry on fracture surface morphology of P911 (9Cr-1Mo-1W-V-Nb) steel (Retraction of Vol 85, Pg 104, 2018), Mahapatra, MM et al., Engineering Failure Analysis, 2024, DOI: 10.1016/j.engfailanal.2023.107775
Performance Evaluation of Micro-Textured Inserts Coupled With Solid Lubricants During the Sustainable Dry Machining of Inconel 825, Nayak, JP., Chetan, Journal of Tribology – Transactions of the ASME, 2024, DOI: 10.1115/1.4064115
Torque generation using synthetic jet actuators, Mittal, V., Arumuru, V., Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2024, DOI: 10.1177/09544089241230267
Multistable States and Snap-Through Instabilities in an Interconnected Dielectric Elastomer Actuators System, Patra, S., Mahapatra, S., Godaba, H., Journal of Applied Mechanics, Transactions ASME, 2024, DOI: 10.1115/1.4064205
A comprehensive study for evaluation of cell cooling coefficient of the batteries of fixed sizes and batteries with defects in manufacturing, Midhun M. et al., Journal of Energy Storage, 2024, DOI: 10.1016/j.est.2023.110341
A machine learning-based image classification of silicon solar cells, Verma, H., Varma Siruvuri, S.D.V.S.S., Budarapu, P.R., International Journal of Hydromechatronics, 2024, DOI: 10.1504/IJHM.2024.135990
Effect of Remelting on Microstructure Formation for Multi-layer and Multi-track Laser Additive Manufacturing, Swain, A., Jegatheesan, M., Rath, P., Bhattacharya, A., et al., Transactions of the Indian Institute of Metals, 2024, DOI: 10.1007/s12666-023-03213-8
Design and analysis of Lithium-ion pouch cell with LMO-NMC blended cathode using coupled thermo-electro-chemical model, Chandra, K.P., Budarapu, P.R., Journal of Energy Storage, 2024, DOI: 10.1016/j.est.2023.109958
Conference Proceedings (12)
Detection of Rainfall Variability on the Basis Ordinal Score, Mishra, P., Kannan, S.R., 2024 IEEE India Geoscience and Remote Sensing Symposium, InGARSS 2024, 2024, DOI: 10.1109/InGARSS61818.2024.10984006
A Soft Robotic System Automatically Learns Precise Agile Motions Without Model Information, Pal, A. et al., 2024 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), 2024, DOI: 10.1109/IROS58592.2024.10801724
Estimation of Ultimate Tensile Strength and Percentage of Elongation in Friction Stir Weld Joints of Cryo-Rolled Al–Mg-Si Alloys, Debbarma, P.P., Mahapatra, M.M., Das, B., Lecture Notes in Mechanical Engineering, 2024, DOI: 10.1007/978-981-97-0900-7_2
Impact of Temperature Perturbation on the Atmospheric Instability, Mishra, P., Kannan, S.R., 2024 IEEE Mediterranean and Middle-East Geoscience and Remote Sensing Symposium, M2GARSS 2024 – Proceedings, 2024, DOI: 10.1109/M2GARSS57310.2024.10537355
Sensitivity of Microphysical Schemes to Predict Induced Rainfall, Mishra, P., Kannan, S.R., 2024 IEEE Mediterranean and Middle-East Geoscience and Remote Sensing Symposium, M2GARSS 2024 – Proceedings, 2024, DOI: 10.1109/M2GARSS57310.2024.10537467
Effect of Internal Flow Channels on Encapsulated PCM with Constant Volume, Pandey, S.K., Tewari, K., Athawale, V., Bhattacharya, A., et al., Lecture Notes in Mechanical Engineering, 2024, DOI: 10.1007/978-981-99-5990-7_30
Effect of Capsule Shape on Melting and Energy Storage Rates for Encapsulated PCM-Based Systems, Kopparthi, T., Athawale, V., Rath, P., Bhattacharya, A., et al., Lecture Notes in Mechanical Engineering, 2024, DOI: 10.1007/978-981-99-5990-7_25
Study of Flow and Thermal Evolution in Zinc Bath During Galvanisation Using a 3D CFD Model, Muhammed Anas, K., Bhattacharya, A., Lecture Notes in Mechanical Engineering, 2024, DOI: 10.1007/978-981-99-5990-7_48
Effect of Metallic Shell on Energy Storage Characteristics of Macro-Encapsulated PCM System, Das, S., Athawale, V., M, J., Rath, P., Bhattacharya, A., et al., Lecture Notes in Mechanical Engineering, 2024, DOI: 10.1007/978-981-99-5990-7_22
Effect of Binary Capsule Size Distribution on Unstructured Packed Bed Encapsulated PCM System, Nahak, P.K., Athawale, V., M, J., Rath, P., Bhattacharya, A., et al., Lecture Notes in Mechanical Engineering, 2024, DOI: 10.1007/978-981-99-5990-7_24
Thermo-Hydraulic Evaluation of Isothermally Heated Bluff Bodies with Different Shapes, Sha, B.B., Mohanty, R.L., Patel, D.C., Das, M.K., et al., Lecture Notes in Mechanical Engineering (9th International and 49th National Conference on Fluid Mechanics and Fluid Power, FMFP 2022), 2024, DOI: 10.1007/978-981-99-7827-4_32
Book Chapters (7)
Finite Element Method for Free Vibration Analysis of Rectangular FGM Plate Based on First Order Shear Deformation Theory, Gogoi, Debarupam, et al., Springer Proceedings in Materials, 2024, DOI: 10.1007/978-981-97-5967-5_30
Influence of Texture Patterns and Cryogenic Coolant During Machining of Precipitation-Hardened SS, Roushan, A., Chetan, Springer Proceedings in Materials, 2024, DOI: 10.1007/978-981-97-5967-5_14
Machine Learning Approaches for Designing Electrode Materials for Lithium-Ion Batteries, Prakash, V., Acharya, S., Sharma, H., Pathak, A.D., Sahu, K.K., Nanostructured Materials for Energy Storage, 2024, DOI: 10.1002/9783527838851.ch3
How to Achieve High-Density Materials, Kacker, R., Singh, S.K., Tandon, S., Advanced Structured Materials, 2024, DOI: 10.1007/978-981-97-6504-1_5
Artificial intelligence and machine learning in battery materials and their applications, Acharya, S., Sridhar, M.K., Pathak, A.D., Sharma, H., Sahu, K. K., et al., Nanostructured Materials Engineering and Characterization for Battery Applications, 2024, DOI: 10.1016/B978-0-323-91304-1.00012-5
Roll Forming in Sheet Metal Forming Principles and Processes, Deb, Suman, Analysis and Optimization of Sheet Metal Forming Processes, 2024, DOI: 10.1201/9781003441755-1
Books (1)
Evolutionary Manufacturing, Design and Operational Practices for Resource and Environmental Sustainability, Sarangi, Sunil, et al., 2024, DOI: 10.1002/9781394198221
Other (1)
Emerging sustainable techniques in metal cutting to reduce the application of metalworking fluids: A review, Roushan, A., Biswas, S., Chetan, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2024, DOI: 10.1177/09544089241256591
Year 2023
Journal Articles (57)
FEM modeling for predicting temperature profile of heat affected zone in single spark EDM process, S.C. Sonthalia, Gaurav Bartarya, S. Mullick, Manufacturing Technology Today, 2023, DOI: 10.58368/MTT.22.5.2023.56-62
Laser transformation hardening of metal sheets under air and water environment, Pallav Raj, Yogesh Kumar Karn, Suvradip Mullick, Gaurav Bartarya, Manufacturing Technology Today, 2023, DOI: 10.58368/MTT.22.3.2023.1-7
Performance study of cooling plates with single and double outlets for lithium-ion battery thermal management system based on topology optimization, Patra, Sanjeet, et al., International Journal of Green Energy, 2023, DOI: 10.1080/15435075.2023.2253886
Analytical modeling for prediction of temperature field and micro-crack depth during laser treatment of alumina for LAM, Jyotiranjan Barik, Gaurav Bartarya, Suvradip Mullick, Manufacturing Technology Today, 2023, DOI: 10.58368/MTT.22.6.2023.47-53
Effect of internal channels on energy storage in macro-encapsulated phase change material, Tewari, Kartik; Kumar Pandey, Shivam; Athawale, Vidula; Bhattacharya, Anirban, Thermal Science and Engineering Progress, 2023, DOI: 10.1016/j.tsep.2023.102045
Impact of vapour bubble movement on the process of two-phase heat transfer phenomena over hybrid elliptical tubes, Mohanty, Rajiva Lochan; Das, Mihir Kumar, International Journal of Thermal Sciences, 2023, DOI: 10.1016/j.ijthermalsci.2023.108228
Experimental assessment of enhanced 2×3 Semi-Closed microstructure tube bundle as an alternative in shell and tube heat exchangers, Moharana, Subhakanta, et al., Applied Thermal Engineering, 2023, DOI: 10.1016/j.applthermaleng.2023.120966
A numerical investigation into thermo-fluid characteristics of pulsating jet impingement on a dimpled surface, Mirikar, D., Arumuru, V., Yadav, H., Physics of Fluids, 2023, DOI: 10.1063/5.0180656
Eco-friendly tool-based electrochemical polishing of additively manufactured metallic components, Patel, Divyansh Singh, et al., Journal of Manufacturing Processes, 2023, DOI: 10.1016/j.jmapro.2023.10.065
The Structural Layers of the Porcine Iris Exhibit Inherently Different Biomechanical Properties, Panda, Satish K., et al., Investigative Ophthalmology and Visual Science, 2023, DOI: 10.1167/iovs.64.13.11
Dry Sliding Wear Performances of AA5052 Hybrid Composite Brake Disc Materials Reinforced With In Situ Synthesized TiC and Multi-Walled Carbon Nanotube, Samal, P., Vundavilli, P.R., Journal of Tribology, 2023, DOI: 10.1115/1.4062296
Analysis of non-uniform laminar flow past a circular cylinder on the flow and sound field evolution using direct numerical simulation approach, Kumar, N., Kumar, S., Arumuru, V., Bhumkar, Y.G., et al., Acta Mechanica, 2023, DOI: 10.1007/s00707-023-03735-8
Similarity Solution for Phase Change of Dilute Binary Isomorphous Alloy with Density Variation during Phase Change, Jakhar, A., Rath, P., Mahapatra, S. K., et al., Archives of Metallurgy and Materials, 2023, DOI: 10.24425/amm.2023.145479
A computational study of particle dynamics in synthetic jet flow field, Stewart, M., Panda, S., Arumuru, V., Physics of Fluids, 2023, DOI: 10.1063/5.0161143
An experimental and numerical analysis of natural convection in a partially open cuboid enclosure with a cylindrical obstacle, Kumar, S., Mahapatra, S. K., Thermal Science and Engineering Progress, 2023, DOI: 10.1016/j.tsep.2023.102118
Model for particle capture by the solid-liquid interface during solidification of metal matrix nanocomposites, Jegatheesan, M., Bhattacharya, A., Thermal Science and Engineering Progress, 2023, DOI: 10.1016/j.tsep.2023.102109
Natural Convection in Open Square Enclosure with Different Heat Source Sizes, Kumar, S., Mahapatra, S.K., Heat Transfer Engineering, 2023, DOI: 10.1080/01457632.2023.2249728
Extraction of natural cellulosic fiber from Myriostachia wightiana stems using chemical retting and its characterization for bio-composite applications, Parida, P.K., Pandit, M.K., Pradhan, A.K., Cellulose, 2023, DOI: 10.1007/s10570-023-05438-8
Impact of a spherical body on an air-inflated membrane structure, Satapathy, S., Sahu, S., Roychowdhury, S., Thin-Walled Structures, 2023, DOI: 10.1016/j.tws.2023.111033
Strain energy release rates in the curved spar wingskin joints with pre-embedded delaminations, Pradhan, A.K., Pandit, M.K., et al., Structural Engineering and Mechanics, 2023, DOI: 10.12989/sem.2023.87.1.047
Investigation of Severe Plastic Deformation Effects on Magnesium RZ5 Alloy Sheets Using a Modified Multi-Pass Equal Channel Angular Pressing (ECAP) Technique, Sahoo, P.S., Mahapatra, M.M., Vundavilli, P.R., Sabat, R.K., et al., Materials, 2023, DOI: 10.3390/ma16145158
Correction to: A comparative study of transverse shrinkage stresses and residual stresses in P91 welded pipe including plasticity error, Pandey, C., Mahapatra, M.M., Kumar, P., Archives of Civil and Mechanical Engineering, 2023, DOI: 10.1007/s43452-023-00757-w
Numerical modeling and experimental study of laser-assisted hard turning of EN31 steel for enhanced surface integrity, Sahoo, M.R., Dutta, P., Bartarya, G., Mullick, S., Nayak, R.K., et al., International Journal of Advanced Manufacturing Technology, 2023, DOI: 10.1007/s00170-023-12003-x
Experimental and numerical study on the distribution of temperature field and residual stress in a multi-pass welded tube joint of Inconel 617 alloy, Kumar, R., Mahapatra, M.M., Pradhan, A.K., et al., International Journal of Pressure Vessels and Piping, 2023, DOI: 10.1016/j.ijpvp.2023.105034
Numerical Model for Simulation of Melting and Microstructure Evolution during a Multi-layered Laser Melting Process, Swain, A., Jegatheesan, M., Rath, P., Bhattacharya, A., et al., Journal of Materials Engineering and Performance, 2023, DOI: 10.1007/s11665-023-08519-8
Aspects of Two-Phase Flow Boiling Heat Transfer inside Tube of Water Tube Boiler—A Numerical Study, Howlader, S., Moharana, S., Das, M.K., Journal of Engineering Thermophysics, 2023, DOI: 10.1134/S1810232823020108
A modified higher-order zigzag theory for predicting flexural behavior of laminated composite and sandwich shell, Alam, M.I., Pandit, M.K., Pradhan, A.K., Mechanics of Advanced Materials and Structures, 2023, DOI: 10.1080/15376494.2023.2231445
Analysis of mechanical and microstructural characteristics of plunger-assisted ECAP strengthened Ti-6Al-4V alloy sheets, Sahoo, P.S., Mahapatra, M.M., Vundavilli, P.R., et al., Archives of Civil and Mechanical Engineering, 2023, DOI: 10.1007/s43452-023-00742-3
Role of face masks and ventilation rates in mitigating respiratory disease transmission in ICU, Arumuru, V., Kusuluri, R., Mirikar, D., Scientific Reports, 2023, DOI: 10.1038/s41598-023-38031-x
Lattice Boltzmann finite-difference-based model for fully nonlinear electrohydrodynamic deformation of a liquid droplet, Basu, H.S., Kondaraju, S., Bahga, S.S., Physical Review E, 2023, DOI: 10.1103/PhysRevE.107.065305
Characterisation of an independently controlled coaxial synthetic jet, Panda, S., Pasa, J., Arumuru, V., Sensors and Actuators A: Physical, 2023, DOI: 10.1016/j.sna.2023.114469
Effect of Velocity Ratio on Evolution of Vortices of a Coaxial jet, Samantaray, S.S., Arumuru, V., Lecture Notes in Mechanical Engineering (48th National Conference on Fluid Mechanics and Fluid Power, FMFP 2021), 2023, DOI: 10.1007/978-981-19-6270-7_73
A novel synthetic jet based heat sink with PCM filled cylindrical fins for efficient electronic cooling, Arumuru, V., Rajput, K., Nandan, R., Rath, P., Das, M., et al., Journal of Energy Storage, 2023, DOI: 10.1016/j.est.2022.106376
Influence of laser parameters on the machining performance of textured cutting tools, Roushan, A., Chetan, Optics and Laser Technology, 2023, DOI: 10.1016/j.optlastec.2023.109569
Focusing of jet from synthetic jet array using non-linear phase delay, Pasa, J., Panda, S., Arumuru, V., Physics of Fluids, 2023, DOI: 10.1063/5.0148794
Global spectral analysis: Review of numerical methods, Bhumkar, Y.G., et al., Computers and Fluids, 2023, DOI: 10.1016/j.compfluid.2023.105915
Influence of cracks on fracture strength and electric power losses in Silicon solar cells at high temperatures: deep machine learning and molecular dynamics approach, Siruvuri, S.D.V.S.S.V., Budarapu, P.R., Paggi, M., Applied Physics A: Materials Science and Processing, 2023, DOI: 10.1007/s00339-023-06629-7
Improved structural uniformity and specific strength of commercially pure aluminum through variable temperature multi axial forging: Finite element analysis and experimental study, Deb, S., et al., International Journal of Lightweight Materials and Manufacture, 2023, DOI: 10.1016/j.ijlmm.2023.02.001
A systematic assessment of multi-dimensional risk factors for sustainable development in food grain supply chains: A business strategic prospective analysis, Das, Sumanta; Sahu, Naresh Chandra, et al., Business Strategy and the Environment, 2023, DOI: 10.1002/bse.3435
Analysing the challenges to sustainable food grain storage management: a path to food security in emerging nations, Das, S., Sahu, N.C., et al., International Journal of Food Science and Technology, 2023, DOI: 10.1111/ijfs.16437
Designing an Effective Plate Fin Heat Exchanger and Prediction of Thermal Performance Operated under Different Water Blends Using Machine Learning, Das, Mihir Kumar, et al., Journal of Thermal Science and Engineering Applications, 2023, DOI: 10.1115/1.4055653
An axisymmetric bioheat transfer analysis through a unified model, Verma, A.K., Rath, P., Mahapatra, S.K., et al., Heat Transfer, 2023, DOI: 10.1002/htj.22855
A 3D pore-scale model for macro-encapsulated phase change material-metal foam hybrid energy storage system, Das, S., Athawale, V., Jegatheesan, M., Rath, P., Bhattacharya, A., et al., Journal of Energy Storage, 2023, DOI: 10.1016/j.est.2023.106995
Design of lithium-ion battery packs for two-wheeled electric vehicles, Javia, D., Tewari, K., Budarapu, P.R., et al., Energy Storage, 2023, DOI: 10.1002/est2.458
A model for nanoparticle transport and distribution with particle-interface interaction during binary alloy solidification, Jegatheesan, M., Bhattacharya, A., Journal of Crystal Growth, 2023, DOI: 10.1016/j.jcrysgro.2023.127173
Effects of Working Temperature on Microstructure and Hardness of Ti-6Al-4V Alloy Subjected to Asymmetrical Rolling, Sahoo, P.S., Mahapatra, M.M., Vundavilli, P.R., et al., Journal of Materials Engineering and Performance, 2023, DOI: 10.1007/s11665-023-08076-0
A review of different working fluids used in the receiver tube of parabolic trough solar collector, Ray, S., et al., Journal of Thermal Analysis and Calorimetry, 2023, DOI: 10.1007/s10973-023-11991-y
Characterization of Cellulose Fiber Extracted from Stems of Myriostachya wightiana (MW) Plants: A Viable Reinforcement for Polymer Composite, Parida, P.K., Pradhan, A.K., Pandit, M.K., Fibers and Polymers, 2023, DOI: 10.1007/s12221-023-00020-2
Effect of channel width on droplet generation inside T-junction microchannel, Jena, S.K., Srivastava, T., Kondaraju, S., et al., Physics of Fluids, 2023, DOI: 10.1063/5.0134087
A methodology to upscale IMD ground radar observations at the same resolution with TRMM PR reflectivity using ANN, Sharma, A., Kannan, S.R., Remote Sensing Applications: Society and Environment, 2023, DOI: 10.1016/j.rsase.2023.100940
Effect of SiC and WC Reinforcements on Microstructural and Mechanical Characteristics of Copper Alloy-Based Metal Matrix Composites Using Stir Casting Route, Samal, P., et al., Applied Sciences (Switzerland), 2023, DOI: 10.3390/app13031754
Evaluation of microstructure and thermal history for TiC/Inconel 625 MMC deposition through pre-placed laser cladding method with and without the application of ultrasonic vibration, Bhatnagar, S., Magham, H.S., Mullick, S., et al., CIRP Journal of Manufacturing Science and Technology, 2023, DOI: 10.1016/j.cirpj.2023.01.009
Numerical analysis of lap shear joints made of functionally graded materials, Kumar, D., Budarapu, P.R., Pradhan, A.K., Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2023, DOI: 10.1007/s40430-022-03874-4
Impingement heat transfer characteristics of nozzles with inclined exits, Mudavath, V., Arumuru, V., Experimental Heat Transfer, 2023, DOI: 10.1080/08916152.2023.2166162
ZnO/CuO nanostructures anchored over Ni/Cu tubular films via pulse electrodeposition for photocatalytic and antibacterial applications, Biswal, H.J., Vundavilli, P.R., et al., Materials Science for Energy Technologies, 2023, DOI: 10.1016/j.mset.2023.01.001
Residual stresses study in butt welded joint of Inconel 617 alloy and effect of post weld heat treatment on residual stresses, Kumar, Rajiv, Pradhan, A.K., Mahapatra, M.M., et al., Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, 2023, DOI: 10.1177/14644207221149205
Nature-inspired bamboo-spiderweb hybrid cellular structures for impact applications, Sethi, A., Budarapu, P.R., Vusa, V.R., Composite Structures, 2023, DOI: 10.1016/j.compstruct.2022.116298
Conference Proceedings (10)
Performance evaluation of 2×3 and 5×3 staggered tube bundle in upward cross flow boiling condition, Subhakanta Moharana, et al., AIP Conference Proceedings, 2023, DOI: 10.1063/5.0155321
Anthropogenic moisture emission and its impact in an urban environment: A numerical study, Parthasarathi Mishra, Srinivasa Ramanujam Kannan, 2023 IEEE India Geoscience and Remote Sensing Symposium (InGARSS), 2023, DOI: 10.1109/InGARSS59135.2023.10490430
Numerical Investigation of Surface Wettability with Textured Surfaces Using Lattice Boltzmann Method, Kondaraju, S., Meshram, G.S., Biswal, G., 2023 6th IEEE International Conference on Advances in Science and Technology, ICAST 2023, 2023, DOI: 10.1109/ICAST59062.2023.10454995
Machining of Ti6Al4V using laser textured cutting tool under Ionic liquid (IL) lubrication condition, Biswas, S., Chetan, Mandal, A., European Society for Precision Engineering and Nanotechnology, Conference Proceedings – 23rd International Conference and Exhibition, EUSPEN 2023, 2023, DOI: Not available
Experimental analysis of coated engine cylinder liners, Das, Mihir K., et al., AIP Conference Proceedings (3rd International Conference on Mechanical Materials and Renewable Energy, ICMMRE 2022), 2023, DOI: 10.1063/5.0145970
Effect of Minimum Quantity Lubrication on Machinability of Magnesium RZ5 Alloy: A Comparative Study, Meher, A., Mahapatra, M.M., Minerals, Metals and Materials Series (Magnesium Technology Symposium held during the 152nd TMS Annual Meeting and Exhibition, TMS 2023), 2023, DOI: 10.1007/978-3-031-22645-8_23
Tribological behaviour of Al6061/Gr/WC hybrid MMCs using multi-response optimisation, Ponugoti, G.R., Mandava, R.K., Vundavilli, P.R., International Journal of Mathematical Modelling and Numerical Optimisation, 2023, DOI: 10.1504/IJMMNO.2023.129930
Sensitivity of Temperature Perturbation to Precipitation: A Parametric Study, Mishra, P., Kannan, S. R., 2023 International Conference on Machine Intelligence for GeoAnalytics and Remote Sensing, MIGARS 2023, 2023, DOI: 10.1109/MIGARS57353.2023.10064516
An Iteration-Based Methodology to Cross Compare Volume Matched Indian Ground Radar Reflectivity Observations Against Space Radar, Sharma, A., Kannan, S. R., 2023 International Conference on Machine Intelligence for GeoAnalytics and Remote Sensing, MIGARS 2023, 2023, DOI: 10.1109/MIGARS57353.2023.10064527
Influence of Surface Unevenness on Enhancement of Heat Transfer During Saturated Pool Boiling of Acetone, Mohanty, Rajiva Lochan; Sha, Bibhu Bhusan; Das, Mihir Kumar, Lecture Notes in Mechanical Engineering, 2023, DOI: 10.1007/978-981-19-4388-1_20
Book Chapters (6)
Movie recommendations, Mishra, Abhishek, et al., Artificial Intelligence and Data Science in Recommendation System: Current Trends, Technologies, and Applications, 2023, DOI: Not available
A review on liquid jet impingement for industrial cooling applications, Das, Mihir Kumar, et al., Progress in Sustainable Development: Sustainable Engineering Practices, 2023, DOI: 10.1016/B978-0-323-99207-7.00008-7
PCM-based heat sink for thermal management of electronic chips, Nandan, R., Arumuru, V., Das, M.K., Handbook of Thermal Management Systems: E-Mobility and Other Energy Applications, 2023, DOI: 10.1016/B978-0-443-19017-9.00037-4
Advances in Solar-Driven Air-Conditioning Systems for Buildings, Das, Mihir K., et al., Pragmatic Engineering and Lifestyle: Responsible Engineering for a Sustainable Future, 2023, DOI: 10.1108/978-1-80262-997-220231003
Processing and Characterization of Aluminum Metal Matrix Composites by Stir Casting with Carbide Reinforcement, Samal, P., Vundavilli, P.R., Meher, A., Mahapatra, M.M., et al., Metal Matrix Composites: Advances in Processing Methods, Machinability Studies and Applications, 2023, DOI: 10.1201/9781003345466-1
Heat Transfer Analysis in Liquid Jet Impingement for Graphene/Water Nano Fluid, Das, M.K., et al., Lecture Notes in Mechanical Engineering, 2023, DOI: 10.1007/978-981-19-6945-4_82
Year 2022
Journal Articles (75)
Combining effect of annealing and reinforcement content on mechanical behavior of multi-walled CNT reinforced AA5052 composites, Samal, P., Tarai, H., Vundavilli, P. R., Materials Today: Proceedings, 2022, DOI: 10.1016/j.matpr.2022.01.340
A pseudo-spectral based efficient volume penalization scheme for Cahn–Hilliard equation in complex geometries, Sinhababu, A., Bhattacharya, A., Mathematics and Computers in Simulation, 2022, DOI: 10.1016/j.matcom.2022.03.015
Experimental investigation on microstructural characterization and mechanical properties of plasma arc welded Inconel 617 plates, Vundavilli, Pandu R.; Srinivas, Kadivendi; Manzoor Hussain, M., High Temperature Materials and Processes, 2022, DOI: 10.1515/htmp-2022-0244
Investigation on the Effect of Machining Parameters on Machinability of RZ5/TiB2 In-Situ Magnesium Matrix Composite, Meher, Arabinda; Mahapatra, Manas Mohan, Journal of Materials Engineering and Performance, 2022, DOI: 10.1007/s11665-022-07687-3
Effect of Preheating Temperature on Retention of δ-Ferrite in ASTM A355 Grade P92, Mahapatra, Manas Mohan, et al., Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 2022, DOI: 10.1007/s11663-022-02692-2
Mechanical properties evaluation and microstructural analysis study of ceramic-coated IC engine cylinder liner, Kumar Das, Mihir, et al., Materials Today: Proceedings, 2022, DOI: 10.1016/j.matpr.2022.11.157
Engineered Interphase Mechanics in Single Lap Joints: Analytical and PINN Formulations, Budarapu, PR., et al., International Journal of Computational Methods, 2022, DOI: 10.1142/S0219876221430210
A Comparative Study of Incremental Selfconsistent and Eshelby–Mori–Tanaka Models for Estimating the Electroelastic Properties of Piezoelectric Polymer Composites with an Orthotropic Matrix, Mishra, N., Das, K., Mechanics of Composite Materials, 2022, DOI: 10.1007/s11029-022-10057-8
Thermal runaway management of Li ion battery using PCM: A parametric study, Srivastava, Gaurav; Nandan, Rakesh; Das, Mihir Kumar, Energy Conversion and Management: X, 2022, DOI: 10.1016/j.ecmx.2022.100306
Statistical Modeling of the Machinability of an In-Situ Synthesized RZ5/TiB2 Magnesium Matrix Composite in Dry Turning Condition, Mahapatra, MM., Vundavilli, PR., et al., Crystals, 2022, DOI: 10.3390/cryst12101353
Experimental analysis of electro-jet machining of thin metal sheets under the application of ultrasonic vibration, continuous and pulsed direct current, Dalabehera, T., Mullick, S., Bartarya, G., Shankar, R., et al., Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, 2022, DOI: 10.1177/09544089221133969
Wire Arc Additive Manufactured Mild Steel and Austenitic Stainless Steel Components: Microstructure, Mechanical Properties and Residual Stresses, Rani, Kasireddy Usha; Kumar, Rajiv; Mahapatra, Manas M., et al., Materials, 2022, DOI: 10.3390/ma15207094
Effect of collision, size, and oscillation of RBCs on blood heat transfer in a bifurcated vessel, Das, SS., Mahapatra, SK., Computer Methods in Biomechanics and Biomedical Engineering, 2022, DOI: 10.1080/10255842.2022.2130274
Flow control using single dielectric barrier discharge plasma actuator for flow over airfoil, Bhumkar, Yogesh G., et al., Physics of Fluids, 2022, DOI: 10.1063/5.0107638
Fracture strength of Graphene at high temperatures: data driven investigations supported by MD and analytical approaches, Varma Siruvuri, S.D.V.S.S., Verma, H., Budarapu, P.R., et al., International Journal of Mechanics and Materials in Design, 2022, DOI: 10.1007/s10999-022-09612-x
Crash-worthiness studies on multistage stiffened honeycomb core sandwich structures under dynamic impact loads, Vusa, V.R., Budarapu, P.R., Rabczuk, T., International Journal of Crashworthiness, 2022, DOI: 10.1080/13588265.2022.2121196
Socio-economic and environmental analysis on solar thermal energy-based polygeneration system for rural livelihoods applications on an Island through interventions in the energy-water-food nexus, Mahapatra, Swarup K., et al., Energy Conversion and Management, 2022, DOI: 10.1016/j.enconman.2022.116235
Influence of mass flux ratio on the evolution of coaxial synthetic jet, Panda, Samarendra; Arumuru, Venugopal; Gohil, Trushar B., Physics of Fluids, 2022, DOI: 10.1063/5.0101727
Design of Neural Network-Based Adaptive Inverse Dynamics Controller for Motion Control of Stewart Platform, Jishnu, AK., Chauhan, DKS., Vundavilli, PR., International Journal of Computational Methods, 2022, DOI: 10.1142/S021987622142010X
Forward Kinematics of the Stewart Parallel Manipulator Using Machine Learning, Chauhan, DKS., Vundavilli, PR., International Journal of Computational Methods, 2022, DOI: 10.1142/S0219876221420093
A numerical study to assess the role of pre-stressed inclusions on enhancing fracture toughness and strength of periodic composites, Rahaman, Mohammad Masiur; Varma, T. Venkatesh; Sarkar, Saikat, International Journal of Fracture, 2022, DOI: 10.1007/s10704-022-00663-x
Fluid-filled toroidal membrane in contact with flat elastic substrate, Sahu, Satyajit; Roychowdhury, Soham, Meccanica, 2022, DOI: 10.1007/s11012-022-01575-9
Characterization of AZ91D/Al7075 FGMs fabricated through gravity casting: effect of Zn interface, Mahapatra, M.M., Surekha, B., Samal, Priyaranjan, Materials Research Innovations, 2022, DOI: 10.1080/14328917.2022.2116235
Environment-friendly machining of aerospace-grade Ti alloy using SiAlON ceramic and AlTiN coated carbide inserts under sustainable biodegradable mist condition, Gautam, Akash; Chetan; Bartarya, Gaurav; Dutta, Pranesh, CIRP Journal of Manufacturing Science and Technology, 2022, DOI: 10.1016/j.cirpj.2022.08.006
Effect of variable capsule size distribution for unstructured packed bed encapsulated phase change material system, Nahak, Pranaya Keshari; Athawale, Vidula; Jegatheesan, M.; Rath, Prasenjit; Bhattacharya, Anirban, et al., International Journal of Heat and Mass Transfer, 2022, DOI: 10.1016/j.ijheatmasstransfer.2022.123354
Understanding the Fabrication of Ultrafine Grains Through Severe Plastic Deformation Techniques: An Overview, Sahoo, PS., Meher, A., Mahapatra, MM., Vundavilli, PR., et al., JOM, 2022, DOI: 10.1007/s11837-022-05442-6
Evolution of flow structure from a coaxial synthetic jet, Panda, Samarendra; Arumuru, Venugopal; Gohil, Trushar B., International Journal of Mechanical Sciences, 2022, DOI: 10.1016/j.ijmecsci.2022.107588
T-Joint Micromixer Coupled with Deforming Diaphragm, Madapati, N., Arumuru, V., Chemical Engineering & Technology, 2022, DOI: 10.1002/ceat.202200036
Investigation on the microstructural and mechanical behavior of the friction stir welded RZ5/8 wt% TiB2 magnesium matrix composites, Meher, Arabinda; Mahapatra, Manas Mohan, Archives of Civil and Mechanical Engineering, 2022, DOI: 10.1007/s43452-022-00503-8
An Anisotropic Hyperelastic Inflated Toroidal Membrane in Lateral Contact with Two Flat Rigid Plates, Sahu, S., Roychowdhury, S., Acta Mechanica Solida Sinica, 2022, DOI: 10.1007/s10338-022-00339-y
Synthesis and Experimental Investigation of Glass Fibre Epoxy/sawdust Composites for Flexural & Tensile Strength, Das, Mihir Kumar, et al., Materiale Plastice, 2022, DOI: 10.37358/MP.22.2.5586
Analysis of sandwich structures with corrugated and spiderweb-inspired cores for aerospace applications, Tewari, K., Pandit, M.K., Budarapu, P.R., et al., Thin-Walled Structures, 2022, DOI: 10.1016/j.tws.2022.109812
An Experimental and Numerical Analysis of Natural Convection in Open Square Enclosure, Kumar, Sonu; Mahapatra, Swarup Kumar; Das, Sidharth Sankar, Heat Transfer Engineering, 2022, DOI: 10.1080/01457632.2022.2086096
Experimental study of microstructural and mechanical characterization of silicon-bronze copper alloy (C87600) hybrid composites reinforced with SiC-Gr particles by stir casting, Tarai, Harihar; Samal, Priyaranjan; Vundavilli, Pandu R., et al., Materials Today: Proceedings, 2022, DOI: 10.1016/j.matpr.2022.04.218
Entropy generation analysis and cooling time estimation of a blast furnace in natural convection environment, Sarangi, Sunil Kumar, et al., Numerical Heat Transfer; Part A: Applications, 2022, DOI: 10.1080/10407782.2022.2083861
Influence of Strouhal number and phase difference on the flow behavior of a synthetic jet array, Pasa, Jangyadatta; Panda, Samarendra; Arumuru, Venugopal, Physics of Fluids, 2022, DOI: 10.1063/5.0095115
Study of heat sink effect of blood in a bifurcated vessel, Das, Sidharth Sankar; Mahapatra, Swarup Kumar, Computer Methods in Biomechanics and Biomedical Engineering, 2022, DOI: 10.1080/10255842.2022.2085998
Numerical and experimental investigation on distribution of residual stress and the influence of heat treatment in multi-pass dissimilar welded rotor joint of alloy 617/10Cr steel, Kumar, Rajiv, Pradhan, A.K., Mahapatra, M.M., et al., International Journal of Pressure Vessels and Piping, 2022, DOI: 10.1016/j.ijpvp.2022.104715
Numerical Simulation of Temperature Fields and Residual Stresses in Multi-Pass Weld Using the Novel Prescribed Temperature Approach with Experimental Validation, Taraphdar, P., et al., Transactions of the Indian Institute of Metals, 2022, DOI: 10.1007/s12666-022-02625-2
Study on alternative composites materials for automobile windshields, Saharsh, J., et al., Materials Today: Proceedings, 2022, DOI: 10.1016/j.matpr.2022.05.435
Mechanical and Corrosion Study of Gas Tungsten Arc Welding-Based SS-304L Wire Arc Additive Manufacturing Components, and the Effect of Sputtered (TiN) Coating on Their Corrosion Behavior, Mahapatra, MM., et al., Journal of Materials Engineering and Performance, 2022, DOI: 10.1007/s11665-022-07032-8
Two phase heat transfer performance intensification of massecuite over bidirectional microstructure surfaces, Varshney, G., Das, MK., Experimental Heat Transfer, 2022, DOI: 10.1080/08916152.2022.2081740
Effects of periodic suction-blowing excitation on the aerodynamic sound generated by a laminar flow past a square cylinder using the direct numerical simulation approach, Kumar, Shashi; Ganta, Naveen; Bhumkar, Yogesh G., AIP Advances, 2022, DOI: 10.1063/5.0096914
Heat transfer augmentation of lithium-ion battery packs by incorporating an interrupted fin arrangement, Chandra K, Parthiv; Jishnu, Ayyangatu Kuzhiyil, et al., International Journal of Energy Research, 2022, DOI: 10.1002/er.8151
A Review on Corrosion Properties of High Entropy Alloys Fabricated by Additive Manufacturing, Nandan, Rakesh; Das, Priyabrata; Pandey, Pulak Mohan, Transactions of the Indian Institute of Metals, 2022, DOI: 10.1007/s12666-022-02610-9
Effect of Moisture Absorption on Mode II Fracture Behavior of Fumed Silica Reinforced Hybrid Fiber Composite, Maharana, SM., Pandit, MK., Pradhan, AK., Journal of Natural Fibers, 2022, DOI: 10.1080/15440478.2022.2073315
A novel PCM and TCE based thermal management of battery module, Ambekar, S., Rath, P., Bhattacharya, A., Thermal Science and Engineering Progress, 2022, DOI: 10.1016/j.tsep.2022.101196
An efficient path planning algorithm for the biped robot in a static environment using fast sweeping method, Vundavilli, Pandu R., et al., Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 2022, DOI: 10.1177/09544062221075168
A 3D resolved-geometry model for unstructured and structured packed bed encapsulated phase change material system, Athawale, V., Jakhar, A., Jegatheesan, M., Rath, P., Bhattacharya, A., et al., Journal of Energy Storage, 2022, DOI: 10.1016/j.est.2022.104430
Propulsive performance of a pitching foil in a side-by-side arrangement with auxiliary pitching foil, Ambolkar, M., Arumuru, V., Journal of Fluids and Structures, 2022, DOI: 10.1016/j.jfluidstructs.2022.103537
Reinforcing effect of multi-walled carbon nanotubes on microstructure and mechanical behavior of AA5052 composites assisted by in-situ TiC particles, Samal, P., Vundavilli, PR., Meher, A., Mahapatra, MM., et al., Ceramics International, 2022, DOI: 10.1016/j.ceramint.2021.12.029
The Effect of Anthropogenic Heat and Moisture on Local Weather at Industrial Heat Islands: A Numerical Experiment, Mishra, P., Kannan, S.R., Radhakrishnan, C., Atmosphere, 2022, DOI: 10.3390/atmos13020357
Analysis of groove quality and machining behavior of Zr-based metallic glass through laser grooving and electro-jet machining, Melkani, U., Mullick, S., Bhatnagar, S., Pantangi, R., Gollapudi, S., et al., Journal of Laser Applications, 2022, DOI: 10.2351/7.0000564
A cell-based smoothed finite element method for finite elasticity, Budarapu, P.R., et al., International Journal for Computational Methods in Engineering Science and Mechanics, 2022, DOI: 10.1080/15502287.2022.2030427
Effect of humidity on the performance of rooftop solar chimney, Dahire, H., Kannan, S.R., Saw, S.K., Thermal Science and Engineering Progress, 2022, DOI: 10.1016/j.tsep.2021.101026
Machine Learning for Vortex Flowmeter Design, Arumuru, V., Thummar, D., Reddy, Y.J., IEEE Transactions on Instrumentation and Measurement, 2022, DOI: 10.1109/TIM.2021.3128692
An elementary survey on structural, electrical, and optical properties of perovskite materials, Nayak, P., et al., Engineering and Applied Science Research, 2022, DOI: 10.14456/easr.2022.30
Effect of moisture susceptibility and aging on interlaminar fracture behavior of fumed silica reinforced Jute-Kevlar hybrid nanocomposite, Maharana, S.M., Pradhan, A.K., Pandit, M.K., Polymer Composites, 2022, DOI: 10.1002/pc.26395
New time-marching methods for compressible Navier-Stokes equations with applications to aeroacoustics problems, Ganta, N., Mahato, B., Bhumkar, Y.G., et al., Applied Mathematics and Computation, 2022, DOI: 10.1016/j.amc.2021.126863
Rain/no-rain classification from combined radar- Radiometer data using machine learning, Anand, A., Kannan, S.R., Remote Sensing Applications: Society and Environment, 2022, DOI: 10.1016/j.rsase.2021.100682
A fixed grid based accurate phase-field method for dendritic solidification in complex geometries, Sinhababu, A., Bhattacharya, A., Computational Materials Science, 2022, DOI: 10.1016/j.commatsci.2021.110973
Powerful Organic Molecular Oxidants and Reductants Enable Ambipolar Injection in a Large-Gap Organic Homojunction Diode, Mohapatra, S.K., et al., ACS Applied Materials and Interfaces, 2022, DOI: 10.1021/acsami.1c21302
Facile fabrication of hydrophobic ZnO nanostructured nickel microtubes through pulse electrodeposition as promising photocatalyst for wastewater remediation, Biswal, H.J., Srivastava, T., Vundavilli, P.R., et al., Journal of Manufacturing Processes, 2022, DOI: 10.1016/j.jmapro.2022.01.001
Effect of build direction on the microstructure evolution and their mechanical properties using GTAW based wire arc additive manufacturing, Mahapatra, M.M., et al., CIRP Journal of Manufacturing Science and Technology, 2022, DOI: 10.1016/j.cirpj.2022.01.010
Organometallic and Organic Dimers: Moderately Air-Stable, Yet Highly Reducing, n-Dopants, Mohapatra, S.K., Marder, S.R., Barlow, S., Accounts of Chemical Research, 2022, DOI: 10.1021/acs.accounts.1c00612
A critical review of parameters governing the boiling characteristics of tube bundle on shell side of two-phase shell and tube heat exchangers, Bhattacharya, A., Moharana, S., Das, M.K., Thermal Science and Engineering Progress, 2022, DOI: 10.1016/j.tsep.2022.101220
Invasive weed optimization coupled biomass and product dynamics of tuning soybean husk towards lipolytic enzyme, Vundavilli, PR., et al., Bioresource Technology, 2022, DOI: 10.1016/j.biortech.2021.126254
A model for predicting the effects of buoyancy driven convection on solidification of binary alloy with nanoparticles, Jegatheesan, M., Bhattacharya, A., International Journal of Heat and Mass Transfer, 2022, DOI: 10.1016/j.ijheatmasstransfer.2021.121916
Melting and energy storage characteristics of macro-encapsulated PCM-metal foam system, Bhattacharya, A., et al., International Journal of Heat and Mass Transfer, 2022, DOI: 10.1016/j.ijheatmasstransfer.2021.121993
Impact analysis of hierarchical honeycomb core sandwich structures, Budarapu, P. R., et al., Composite Structures, 2022, DOI: 10.1016/j.compstruct.2021.114827
Surface wettability effect of plain and plasma-sprayed copper-coated surfaces on CHF enhancement during saturated pool boiling of FC-72, Mohanty, RL., Moharana, S., Das, MK., Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 2022, DOI: 10.1177/09544062211057471
Abrasive wear performance of vetiver grass-red mud- reinforced hybrid composites: Effect of fiber loading on various wear properties, Samal, P., et al., Journal of Natural Fibers, 2022, DOI: 10.1080/15440478.2021.2018086
Detachment folding, growth mechanism and seismic potential in the Jammu Sub-Himalaya, Mishra, RL., et al., Journal of Structural Geology, 2022, DOI: 10.1016/j.jsg.2022.104514
A numerical experiment to study the impact of temperature enhancement by anthropogenic heating on local weather at the Angul region of India, Mishra, P., Kannan, SR., Journal of Earth System Science, 2022, DOI: 10.1007/s12040-021-01801-0
Fabrication and Characterization of Nickel Microtubes through Electroforming: Deposition Optimization Using Evolutionary Algorithms, Biswal, H.J., Vundavilli, P.R., Gupta, A., Journal of Materials Engineering and Performance, 2022, DOI: 10.1007/s11665-021-06223-z
Conference Proceedings (9)
Modeling and Analysis of Inflated Air-Spring, Sahu, S., Roychowdhury, S., 68th ISTAM conference, 2022, DOI: Not available
An Alignment-based Methodology to cross-compare Indian Ground Radar Observations with Space Radar, Sharma, A., Kannan, S. R. R., AGU Fall Meeting 2022, 2022, DOI: Not available
A Neural Network based Methodology to Retrieve 3D Rainfall from Microwave Imager using Space Radar and Ground Radar observations, Sharma, A., Kannan, S. R. R., AGU Fall Meeting 2022, 2022, DOI: Not available
Atmospheric convection caused by temperature dispersion in and around the industrial source and its effect on precipitation rate: Gaussian approach, Mishra, P., Kannan, S. R. R., AGU Fall Meeting 2022, 2022, DOI: Not available
Global-spectral analysis of the space-time discretization schemes to understand their applicability in performing aeroacoustics simulations, Kumar, S., Ramcharan, B., Yadav, V.S., Bhumkar, Y.G., et al., Proceedings of the International Congress on Sound and Vibration, 2022, DOI: Not available
Heat Transfer and Pressure Drop Characteristics of Semicircular Tube at Different Orientations, Sha, Bibhu Bhusan; Mohanty, Rajiva Lochan; Das, Mihir Kumar, Lecture Notes in Mechanical Engineering, 2022, DOI: 10.1007/978-981-19-2188-9_79
Design and Optimization of FGVM Acoustic Linings for Deep-Water applications, Mishra, S., Panigrahi, S.N., ECS Transactions, 2022, DOI: 10.1149/10701.18189ecst
A Hybrid MCIWO-NN Forward Kinematics Estimator for the Stewart Platform, Chauhan, Dev Kunwar Singh; Vundavilli, Pandu R., Lecture Notes in Networks and Systems, 2022, DOI: 10.1007/978-981-19-0707-4_35
A Study on Residual Stress Distribution in Welded Joint of P91 and SS304H Steel Plate, Taraphdar, P.K., et al., Lecture Notes in Mechanical Engineering, 2022, DOI: 10.1007/978-981-16-7787-8_1
Book Chapters (1)
Corrosion inhibition by aluminum oxide, Taraphdar, Pradeeptta Kumar; Biswal, Hrudaya Jyoti, et al., Inorganic Anticorrosive Materials: Past, Present and Future Perspectives, 2022, DOI: 10.1016/B978-0-323-90410-0.00013-1
Other (4)
Preface, Budarapu, Pattabhi Ramaiah; Anitescu, Cosmin; Rabczuk, Timon, International Journal of Computational Methods, 2022, DOI: 10.1142/S0219876222020017
A review on manufacturability of magnesium matrix composites: Processing, tribology, joining, and machining, Meher, A., Mahapatra, MM., Vundavilli, PR., et al., CIRP Journal of Manufacturing Science and Technology, 2022, DOI: 10.1016/j.cirpj.2022.07.012
Recent advances in energy field assisted hybrid electrodeposition and electroforming processes, Biswal, HJ., Kaur, JJ., Vundavilli, PR., et al., CIRP Journal of Manufacturing Science and Technology, 2022, DOI: 10.1016/j.cirpj.2022.05.013
Deep Learning-based Optimization of Piezoelectric Vibration Energy Harvesters, Menon, A.M., Tanmayee, K.R.R., Verma, H., Swayamjyoti, S., Sahu, K.K., et al., AIAA Science and Technology Forum and Exposition, AIAA SciTech Forum 2022, 2022, DOI: 10.2514/6.2022-2142
Year 2021
Journal Articles (63)
Reduced graphene oxide based hybrid functionalized films for hydrogen detection: Theoretical and experimental studies, Pal, P., Parida, P. K., et al., Sensors International, 2021, DOI: 10.1016/j.sintl.2020.100072
Experimental investigations on the electrodeposition of Ni on copper substrate, Das, A., Vundavilli, P. R., Surekha, B., Srinivasa Sai, V., International Journal of Manufacturing Technology and Management, 2021, DOI: 10.1504/IJMTM.2021.121572
Impact Analysis of Thin-Walled Cylindrical Tubes, Vusa, V.R., Budarapu, P.R., International Journal of Computational Methods, 2021, DOI: 10.1142/S0219876221430076
A Machine Learning-Based Approach for the Design of Lower Limb Exoskeleton, Varma, V.S., Yogeshwar Rao, R., Vundavilli, P.R., Pandit, M.K., Budarapu, P.R., et al., International Journal of Computational Methods, 2021, DOI: 10.1142/S0219876221420123
Mini-Channel Liquid Cooling System for Improving Heat Transfer Capacity and Thermal Uniformity in Battery Packs for Electric Vehicles, Srinivaas, S., et al., Journal of Electrochemical Energy Conversion and Storage, 2021, DOI: Not available
Modeling layer-by-layer laser melting and solidification of binary alloy powder bed, Swain, A., Khan, P.M., Rath, P., Bhattacharya, A., et al., Journal of Laser Applications, 2021, DOI: 10.2351/7.0000541
Study on evaluation of through-thickness residual stresses and microstructure-mechanical property relation for dissimilar welded joint of modified 9Cr-1Mo and SS304H steel, Taraphdar, PK., et al., International Journal of Pressure Vessels and Piping, 2021, DOI: Not available
Microstructural features and mechanical properties of similar and dissimilar ferritic welded joints for ultra-supercritical power plants, Mahapatra, MM., et al., International Journal of Pressure Vessels and Piping, 2021, DOI: 10.1016/j.ijpvp.2021.104556
Prediction of melting characteristics of encapsulated phase change material energy storage systems, Athawale, V., Bhattacharya, A., Rath, P., International Journal of Heat and Mass Transfer, 2021, DOI: 10.1016/j.ijheatmasstransfer.2021.121872
Droplet Impact and Spreading on Inclined Surfaces, Srivastava, T., Jena, SK., Kondaraju, S., Langmuir, 2021, DOI: 10.1021/acs.langmuir.1c02457
New optimized implicit-explicit Runge-Kutta methods with applications to the hyperbolic conservation laws, Bhumkar, YG., et al., Journal of Computational Physics, 2021, DOI: 10.1016/j.jcp.2021.110650
Modeling the abrasive wear behavior of in-situ synthesized magnesium RZ5/TiB2 metal matrix composites, Meher, A., et al., Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, 2021, DOI: 10.1177/09544089211065532
Current-voltage characteristics of silicon based solar cells in the presence of cracks: MD simulations, Siruvuri, SDVSSV, Budarapu, PR., Paggi, M., Semiconductor Science and Technology, 2021, DOI: 10.1088/1361-6641/ac3374
Simulation of bridging mechanisms in complex laminates using a hybrid PF-CZM method, Dusane, AR., et al., Mechanics of Advanced Materials and Structures, 2021, DOI: 10.1080/15376494.2021.2006835
Comprehensive Characterization of Date Palm Petiole Fiber Reinforced Epoxy Composites: Effect of Fiber Treatment and Loading on Various Properties, Samal, P., et al., Journal of Natural Fibers, 2021, DOI: 10.1080/15440478.2021.1982834
A lumped parametric analytical model for predicting molten pool temperature and clad geometry in pre-placed powder laser cladding, Bhatnagar, S., Mullick, S., Gopinath, M., Optik, 2021, DOI: 10.1016/j.ijleo.2021.168015
Double masking protection vs. comfort-A quantitative assessment, Arumuru, V., Samantaray, S.S., Pasa, J., Physics of Fluids, 2021, DOI: 10.1063/5.0058571
Design and development of fuzzy logic-based expert system for forward and reverse mappings in resin bonded sand systems, Vundavilli, P.R., et al., International Journal of Systems Assurance Engineering and Management, 2021, DOI: 10.1007/s13198-021-01293-7
Experimental Investigation on the Mechanical, Thermal, and Morphological Behaviour of Prosopis juliflora Bark Reinforced Epoxy Polymer Composite, Samal, P., et al., Journal of Natural Fibers, 2021, DOI: 10.1080/15440478.2021.1964144
Multi-response modeling for sliding wear behavior of AA5052/TiC composites by stir casting: A comparative analysis using response surface methodology and fuzzy logic system, Samal, P., Vundavilli, P.R., Meher, A., Mahapatra, M.M., et al., Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, 2021, DOI: 10.1177/09544089211037443
Physics-informed neural networks for estimating stress transfer mechanics in single lap joints, Sharma, S., Awasthi, R., Budarapu, P.R., et al., Journal of Zhejiang University: Science A, 2021, DOI: 10.1631/jzus.A2000403
A 2D model for prediction of nanoparticle distribution and microstructure evolution during solidification of metal matrix nanocomposites, Jegatheesan, M., Bhattacharya, A., Modelling and Simulation in Materials Science and Engineering, 2021, DOI: 10.1088/1361-651X/ac165c
On the improvement in process performance of ceramic inserts during hard turning in MQL environment, Bhadoria, N.S., Bartarya, G., Materials and Manufacturing Processes, 2021, DOI: 10.1080/10426914.2021.1967978
Residual stress distribution in thick double-V butt welds with varying groove configuration, restraints and mechanical tensioning, Taraphdar, P.K., Kumar, R., Pandey, C., Mahapatra, M.M., et al., Journal of Manufacturing Processes, 2021, DOI: 10.1016/j.jmapro.2021.06.046
Prediction of distortions and residual stresses in narrow gap weld joints prepared by hot wire GTAW and its validation with experiments, Mahapatra, M.M., et al., International Journal of Pressure Vessels and Piping, 2021, DOI: 10.1016/j.ijpvp.2021.104477
Improvement of Mechanical and Thermal Properties of Polyethylene Terephthalate (PET) Composite Reinforced with Chemically Treated Ladies Finger Natural Fiber, Samal, P., et al., Journal of Natural Fibers, 2021, DOI: 10.1080/15440478.2021.1932680
Droplet fate, efficacy of face mask, and transmission of virus-laden droplets inside a conference room, Mirikar, D., Palanivel, S., Arumuru, V., Physics of Fluids, 2021, DOI: 10.1063/5.0054110
Development of path planning algorithm for biped robot using combined multi-point RRT and visibility graph, Pradhan, S., Mandava, R.K., Vundavilli, P.R., International Journal of Information Technology (Singapore), 2021, DOI: 10.1007/s41870-021-00696-w
Room temperature hydrogen sensing with polyaniline/SnO2/Pd nanocomposites, Pippara, R.K., et al., Micro and Nano Engineering, 2021, DOI: 10.1016/j.mne.2021.100086
An investigation on physical phenomena of water-jet assisted underwater wet laser welding technique under continuous and pulsed mode operation, Sakate, P.M., Mullick, S., Gopinath, M., Optik, 2021, DOI: 10.1016/j.ijleo.2021.167272
Design and development of an adaptive-torque-based proportional-integral-derivative controller for a two-legged robot, Mandava, R. K., Vundavilli, P. R., Soft Computing, 2021, DOI: 10.1007/s00500-021-05811-4
Role of the heterogeneity in microstructure on the mechanical performance of the Autogenous Gas Tungsten Arc (GTA) welded dissimilar joint of F/M P91 and SS304L steel, Taraphdar, P.K., Mahapatra, M.M., et al., Fusion Engineering and Design, 2021, DOI: 10.1016/j.fusengdes.2021.112616
Experimental Investigations on Microstructure, Mechanical Behavior and Tribological analysis of AA5154/SiC Composites by Stir Casting, Samal, P., Surekha, B., Vundavilli, P.R., Silicon, 2021, DOI: 10.1007/s12633-021-01115-2
Breathing, virus transmission, and social distancing-An experimental visualization study, Arumuru, V., Pasa, J., Samantaray, S.S., Varma, V.S., et al., AIP Advances, 2021, DOI: 10.1063/5.0045582
Performance Assessment of Polymeric Composite Wrap to Repair Damaged Pipelines Exposed under Accelerated Environment Conditions, Pandit, M.K., et al., Journal of Pipeline Systems Engineering and Practice, 2021, DOI: 10.1061/(ASCE)PS.1949-1204.0000549
Numerical investigation of multiple droplet growth dynamics on a solid surface using three-dimensional lattice Boltzmann simulations, Kondaraju, S., et al., AIP Advances, 2021, DOI: 10.1063/5.0045353
Effects of groove configuration and buttering layer on the through-thickness residual stress distribution in dissimilar welds, Taraphdar, P.K., Mahapatra, M.M., Pradhan, A.K., et al., International Journal of Pressure Vessels and Piping, 2021, DOI: 10.1016/j.ijpvp.2021.104392
Laser-assisted Microhole Fabrication in a Flexible Polymer Substrate, Biswal, H. J., Rout, P., Vundavilli, P. R., et al., Lasers in Engineering, 2021, DOI: Not available
Prediction of droplet sizes in a T-junction microchannel: Effect of dispersed phase inertial forces, Jena, S.K., Bahga, S.S., Kondaraju, S., Physics of Fluids, 2021, DOI: 10.1063/5.0039913
Design and development of two-wheeled self-balancing robot and its controller, Chheda, A.M., Mandava, R.K., Vundavilli, P.R., International Journal of Mechatronics and Automation, 2021, DOI: 10.1504/IJMA.2021.113715
Numerical analysis of the effect of tool wear on surface integrity during hard turning, Nayak, Rupak Kumar; Bartarya, Gaurav; Sahoo, Manas Ranjan, Journal of Mechanical Science and Technology, 2021, DOI: 10.1007/s12206-021-0235-7
Binary alloy solidification and freckle formation: Effect of shrinkage induced flow on solutal instability and macro-segregation, Monde, A.D., Jakhar, A., et al., Physics of Fluids, 2021, DOI: 10.1063/5.0039003
Evaluation of through-thickness residual stresses and microstructure in SA516 Gr. 70 steel welds, Taraphdar, P.K., Mahapatra, M.M., Pradhan, A.K., et al., Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2021, DOI: 10.1177/0954405421990124
Intercomparison between IMD ground radar and TRMM PR observations using alignment methodology and artificial neural network, Sharma, A., Kannan, S.R., Journal of Earth System Science, 2021, DOI: 10.1007/s12040-020-01540-8
Analysis and optimization of triple tube phase change material based energy storage system, Sriram, M., Bhattacharya, A., Journal of Energy Storage, 2021, DOI: 10.1016/j.est.2021.102350
Significance of Finite Element Models and Solid-State Phase Transformation on the Evaluation of Weld Induced Residual Stresses, Taraphdar, P.K., Kumar, R., Mahapatra, M.M., et al., Metals and Materials International, 2021, DOI: 10.1007/s12540-020-00921-4
Thermal performance of a single stage double inlet pulse tube refrigerator: experimental investigation and CFD simulation, Manoj, K.N.S., Sarangi, S.K., et al., Experimental Heat Transfer, 2021, DOI: 10.1080/08916152.2021.1873875
Combined effect of thermal anisotropy and shrinkage on growth of binary alloy equiaxed crystal, Jakhar, A., Swain, A., Bhattacharya, A., Rath, P., Mahapatra, S.K., et al., Thermal Science and Engineering Progress, 2021, DOI: 10.1016/j.tsep.2021.100843
High aspect ZnO nanorod growth over electrodeposited tubes for photocatalytic degradation of EtBr dye, Biswal, H.J., Vundavilli, P.R., et al., RSC Advances, 2021, DOI: 10.1039/d0ra08124h
Industrial Fluid Flow Measurement Using Optical Fiber Sensors: A Review, Gupta, H., Arumuru, V., Jha, R., IEEE Sensors Journal, 2021, DOI: 10.1109/JSEN.2020.3045506
Characterization of the soft zone in dissimilar welds joint of 2.25Cr-1Mo and lean duplex LDX2101 steel, Pandey, C., et al., Fusion Engineering and Design, 2021, DOI: 10.1016/j.fusengdes.2020.112147
Bidirectional Interferometric Flowmeter with Linear Sensitivity and Large Dynamic Range, Arumuru, V., Kodam, A., Jha, R., IEEE Transactions on Instrumentation and Measurement, 2021, DOI: 10.1109/TIM.2020.3014468
Accuracy and computational efficiency of dealiasing schemes for the DNS of under resolved flows with strong gradients, Sinhababu, A., Ayyalasomayajula, S., Mathematics and Computers in Simulation, 2021, DOI: 10.1016/j.matcom.2020.10.020
Effective control of aeolian tone using a pair of splitter plates, Mahato, B., Ganta, N., Bhumkar, Y.G., Journal of Sound and Vibration, 2021, DOI: 10.1016/j.jsv.2020.115906
A Non-Fourier Bioheat Transfer Model for Cryosurgery of Tumor Tissue with Minimum Collateral Damage, Barman, C., Rath, P., Bhattacharya, A., Computer Methods and Programs in Biomedicine, 2021, DOI: 10.1016/j.cmpb.2020.105857
An improved dealiasing scheme for the fourth-order Runge-Kutta method: Formulation, accuracy and efficiency analysis, Sinhababu, A., Ayyalasomayajula, S., International Journal for Numerical Methods in Fluids, 2021, DOI: 10.1002/fld.4898
Thermal Barrier Coatings-A State of the Art Review, Thakare, J. G., et al., Metals and Materials International, 2021, DOI: 10.1007/s12540-020-00705-w
Distortion and residual stresses in thick plate weld joint of austenitic stainless steel: Experiments and analysis, Banik, S.D., et al., Journal of Materials Processing Technology, 2021, DOI: 10.1016/j.jmatprotec.2020.116944
Influence of fumed silica nanofiller and stacking sequence on interlaminar fracture behaviour of bidirectional jute-kevlar hybrid nanocomposite, Maharana, S.M., Pandit, M.K., Pradhan, A.K., Polymer Testing, 2021, DOI: 10.1016/j.polymertesting.2020.106898
An enthalpy based model for microstructure evolution during binary alloy solidification, Jegatheesan, M., Bhattacharya, A., Computational Materials Science, 2021, DOI: 10.1016/j.commatsci.2020.110072
An efficient Pseudo-spectral based phase field method for dendritic solidification, Sinhababu, A., Bhattacharya, A., Ayyalasomayajula, S., Computational Materials Science, 2021, DOI: 10.1016/j.commatsci.2020.109967
Process analysis and regression modelling of resistance spot welded joints of austenitic stainless steel 304L and low carbon steel sheets by using surface response methodology, Boriwal, Lokesh, et al., Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, 2021, DOI: 10.1177/0954408920940888
Conference Proceedings (13)
Thermal management of battery module using PCM and nanoparticle composite, Ambekar, S., Rath, P., Bhattacharya, A., Proceedings of the 26th National and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference, 2021, DOI: 10.1615/IHMTC-2021.560
The Tribological Behavior of an In-Situ Processed Magnesium Alloy-Based Metal Matrix Composite, Meher, A., Mahapatra, M. M., Metal-Matrix Composites, 2021, DOI: 10.1007/978-3-030-65249-4_5
Measurement of Through-Thickness Residual Stresses Under Restrained Condition in Pressure Vessel Steel Weld, Taraphdar, P. K., Mahapatra, M. M., Pradhan, A. K., et al., Advances in Systems Engineering, 2021, DOI: 10.1007/978-981-15-8025-3_13
Micro-scale solidification and micro-segregation during laser spot melting of binary alloys, Swain, A., Jegatheesan, M., Kole, S., Rath, P., et al., Proceedings of the 26th National and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2021), 2021, DOI: 10.1615/IHMTC-2021.630
Droplet Spreading Post-Impact on Inclined Solid Surfaces, Srivastava, T., Jena, S. K., Kondaraju, S., Proceedings of the 26th National and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2021), 2021, DOI: 10.1615/IHMTC-2021.4070
Numerical Investigation of Wettability and its Effects on Flow through Textured Micro-channels using Lattice Boltzmann Method, Meshram, G., Kondaraju, S., Proceedings of the 26th National and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2021), 2021, DOI: 10.1615/IHMTC-2021.1850
Melting and solidification of metal matrix nanocomposites during laser melting, Jegatheesan, M., Swain, A., Kole, S., Rath, P., et al., Proceedings of the 26th National and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2021), 2021, DOI: 10.1615/IHMTC-2021.760
Development of a numerical model for cell shrinkage during cryopreservation of cells, Kori, P. S., Bhattacharya, A., Rath, P., Proceedings of the 26th National and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2021), 2021, DOI: 10.1615/IHMTC-2021.600
Three-dimensional pore scale modelling of PCM-metal foam composites for energy storage, Joy, J. M., Jakhar, A., Jegatheesan, M., Rath, P., et al., Proceedings of the 26th National and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2021), 2021, DOI: 10.1615/IHMTC-2021.590
Effect of Natural Convection on Melting Characteristics of Encapsulated PCM, Athawale, V., Jakhar, A., Jegatheesan, M., Rath, P., et al., Proceedings of the 26th National and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2021), 2021, DOI: 10.1615/IHMTC-2021.570
Upscaling IMD ground radar vertical reflectivity using TRMM PR observations and artificial neural network, Sharma, A., Kannan, S.R., International Geoscience and Remote Sensing Symposium (IGARSS), 2021, DOI: 10.1109/IGARSS47720.2021.9553734
A comprehensive 3d fem model to study forces, cutting temperature and residual stresses during vibration assisted hard turning considering tool cooling cycle, Dutta, P., Bartarya, G., ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2021, DOI: 10.1115/IMECE2021-70907
Heat transfer at film cooling of an array of horizontal tubes with an enhanced surface, Das, M.K., et al., Journal of Physics: Conference Series (2021 International Conference on Automatics and Energy, ICAE 2021), 2021, DOI: 10.1088/1742-6596/2096/1/012141
Book Chapters (2)
The underlying mechanisms of coolant contribution in the machining process, Chetan; Ghosh, Sudarsan, et al., Machining and Tribology: Processes, Surfaces, Coolants, and Modeling, 2021, DOI: 10.1016/B978-0-12-819889-6.00003-4
PCM-Based Energy Storage Systems for Solar Water Heating, Sharma, A., Rath, P., Bhattacharya, A., Energy, Environment and Sustainability, 2021, DOI: 10.1007/978-981-16-0594-9_14
Other (1)
Preface, Ramgopal, M., Rout, S.K., Sarangi, S.K., Lecture Notes in Mechanical Engineering, 2021, DOI: Not available
Year 2020
Journal Articles (50)
Low-velocity impact studies on GFRP and hybrid composite structures, Shetty, H., Sethuram, D., Rammohan, B., Budarapu, P.R., International Journal of Advances in Engineering Sciences and Applied Mathematics, 2020, DOI: 10.1007/s12572-021-00287-9
Dry sliding wear behavior of Al 6082 metal matrix composites reinforced with red mud particles, Samal, P., Mandava, R.K., Vundavilli, P.R., SN Applied Sciences, 2020, DOI: 10.1007/s42452-020-2136-2
Artificial bee colony, genetic, back propagation and recurrent neural networks for developing intelligent system of turning process, Shettigar, A.K., et al., SN Applied Sciences, 2020, DOI: 10.1002/chem.202003912
Performance of Nano-Filler Reinforced Composite Overwrap System to Repair Damaged Pipelines Subjected to Quasi-static and Impact Loading, Sharma, A., et al., Journal of Failure Analysis and Prevention, 2020, DOI: 10.1007/s11668-020-01013-6
Effect of convection on melting characteristics of phase change material-metal foam composite thermal energy storage system, Parida, A., Bhattacharya, A., Rath, P., Journal of Energy Storage, 2020, DOI: 10.1016/j.est.2020.101804
The effect of delamination in free vibration responses of adhesively bonded spar wingskin joints, Mishra, P.K., Pradhan, A.K., Pandit, M.K., et al., Mechanics Based Design of Structures and Machines, 2020, DOI: 10.1080/15397734.2020.1858869
Finite Element Analysis of Thermal-Induced Stresses in Submerged Arc Welded Chromium-Molybdenum Steel and Their Mitigation through Heat Treatment, Suman, S., et al., Journal of Materials Engineering and Performance, 2020, DOI: 10.1007/s11665-020-05262-2
Experimental visualization of sneezing and efficacy of face masks and shields, Arumuru, V., Pasa, J., Samantaray, S. S., Physics of Fluids, 2020, DOI: 10.1063/5.0030101
Jet deflection by two side-by-side arranged hydrofoils pitching in a quiescent fluid, Raj, K. M., Arumuru, V., AIP Advances, 2020, DOI: 10.1063/5.0026263
Finite Element Analysis and Experimental Evaluation of Residual Stress of Zr-4 alloys Processed through Swaging, Singh, G., et al., Metals, 2020, DOI: 10.3390/met10101281
Experimental and Numerical Investigation of Residual Stress in Coatings on Steel, Ojha, S., et al., Journal of Testing and Evaluation, 2020, DOI: 10.1520/JTE20180247
A fully coupled hybrid lattice Boltzmann and finite difference method-based study of transient electrokinetic flows, Basu, H. S., Bahga, S. S., Kondaraju, S., Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2020, DOI: 10.1098/rspa.2020.0423
Experimental investigations on flow over a circular cylinder placed in a circular pipe, Arumuru, V., Agrawal, A., Prabhu, S. V., Physics of Fluids, 2020, DOI: 10.1063/5.0019725
Study of Microstructural and Machining Characteristics of Hypereutectic Al-Si Alloys Using Wire-EDM for Photovoltaic Application, Samal, P., Vundavilli, P.R., Mandal, A., et al., Silicon, 2020, DOI: 10.1007/s12633-020-00742-5
Dissolution of delta-ferrite and its effect on mechanical properties of P92 steel welds, Saini, N., et al., Materials Science and Engineering: A, 2020, DOI: 10.1016/j.msea.2020.139370
Study on effect of TiB2 reinforcement on the microstructural and mechanical properties of magnesium RZ5 alloy based metal matrix composites, Meher, A., Mahapatra, M.M., Samal, P., Vundavilli, P.R., et al., Journal of Magnesium and Alloys, 2020, DOI: 10.1016/j.jma.2020.04.003
Analytical model for predicting maximum spread of droplet impinging on solid surfaces, Srivastava, T., Kondaraju, S., Physics of Fluids, 2020, DOI: 10.1063/5.0020219
Numerical Investigation on Heat Transfer and Flow Characteristics of a Confined Circular Cylinder With Slit, Jadon, L., Arumuru, V., Journal of Thermal Science and Engineering Applications, 2020, DOI: 10.1115/1.4046061
Computation of Aeroacoustics and Fluid Flow Problems Using a Novel Dispersion Relation Preserving Scheme, Mahato, B., Naveen, G., Bhumkar, Y. G., Journal of Theoretical and Computational Acoustics, 2020, DOI: 10.1142/S2591728518500639
Estimation of residual stress in air plasma sprayed MWCNT-reinforced 8YSZ-alumina composite coating, Thakare, J. G., Mulik, R. S., Mahapatra, M. M., Archives of Civil and Mechanical Engineering, 2020, DOI: 10.1007/s43452-020-00108-z
Development of process maps based on molten pool thermal history during laser cladding of Inconel 718/TiC metal matrix composite coatings, Gopinath, M., Mullick, S., Nath, A. K., Surface & Coatings Technology, 2020, DOI: 10.1016/j.surfcoat.2020.126100
Novel residual stress measurement technique to evaluate through thickness residual stress fields, Taraphdar, P. K., Mahapatra, M. M., et al., Materials Letters, 2020, DOI: 10.1016/j.matlet.2020.128347
Polyvinyl Chloride Reinforced with Areca Sheath Fiber Composites-An Experimental Study, Nayak, S., et al., Journal of Natural Fibers, 2020, DOI: 10.1080/15440478.2018.1534186
Comprehensive machining analysis to establish cryogenic LN2 and LCO2 as sustainable cooling and lubrication techniques, Shah, P., Khanna, N., Chetan, Tribology International, 2020, DOI: 10.1016/j.triboint.2020.106314
Mitigation of aerodynamic sound for a laminar flow past a square cylinder using a pair of cowl plates, Mahato, B., Ganta, N., Bhumkar, Y.G., Physics of Fluids, 2020, DOI: 10.1063/5.0010932
Investigating causal relationship of disaster risk reduction activities in the Indian context, Barve, A., Prasad, R.N., Yadav, D.K., International Journal of Emergency Management, 2020, DOI: 10.1504/IJEM.2020.110107
Thermal anisotropy in binary alloy solidification: An equivalent isotropic model, Jakhar, Amman; Rath, Prasenjit; Mahapatra, Swarup Kumar, et al., Numerical Heat Transfer, Part B: Fundamentals, 2020, DOI: 10.1080/10407790.2020.1787759
Performance Evaluation of Mechanical Properties of Nanofiller Reinforced Jute-Kevlar Hybrid Composite, Maharana, Sunil Manohar; Pradhan, Arun Kumar; Pandit, Mihir Kumar, Journal of Natural Fibers, 2020, DOI: 10.1080/15440478.2020.1777246
Studies on thermal management of Lithium-ion battery pack using water as the cooling fluid, Siruvuri, S. D. V. S. S. Varma; Budarapu, P. R., Journal of Energy Storage, 2020, DOI: 10.1016/j.est.2020.101377
Thermoelastic effect on inter-laminar embedded delamination characteristics in Spar Wingskin Joints made with laminated FRP composites, Mishra, P.K., Pradhan, A. K., Pandit, M. K., et al., Steel and Composite Structures, 2020, DOI: 10.12989/scs.2020.35.3.439
Comparison of energy absorption characteristics of PCM-metal foam systems with different pore size distributions, Dinesh, Battula Venkata Sai; Bhattacharya, Anirban, Journal of Energy Storage, 2020, DOI: 10.1016/j.est.2019.101190
Evaluation of through-thickness residual stresses in conventional and narrow grooved stainless steel welds, Taraphdar, P. K., Mahapatra, M. M., Pradhan, A. K., et al., Proceedings of the Institution of Mechanical Engineers Part L: Journal of Materials: Design and Applications, 2020, DOI: 10.1177/1464420720930355
Finite element investigation of IGSCC-prone zone in AISI 304L multipass groove welds, Taraphdar, P. K., Pandey, C., Mahapatra, M. M., Archives of Civil and Mechanical Engineering, 2020, DOI: 10.1007/s43452-020-00056-8
Comparative analysis of dry, flood, MQL and cryogenic CO2 techniques during the machining of 15-5-PH SS alloy, Khanna, Navneet; Shah, Prassan; Chetan, Tribology International, 2020, DOI: 10.1016/j.triboint.2020.106196
Study on connecting tube dynamics for transient pressure measurement, Yadav, H., et al., Sādhanā – Academy Proceedings in Engineering Sciences, 2020, DOI: 10.1007/s12046-020-1310-y
Evaluation of Cyclic Hot Corrosion Resistance of Plasma-Sprayed Composite Coating in Na2SO4-60%V2O5 Molten Salt Environment, Thakare, J. G., Mulik, R. S., Mahapatra, M. M., Journal of Thermal Spray Technology, 2020, DOI: 10.1007/s11666-020-01010-z
Abrasive Wear Behaviour of TiB2 Reinforced In-Situ Synthesized Magnesium RZ5 Alloy based Metal Matrix Composites, Meher, A., Mahapatra, M.M., Samal, P., Vundavilli, P.R., et al., Metals and Materials International, 2020, DOI: 10.1007/s12540-020-00746-1
Development of non-dimensional two phase heat transfer correlation based on physics of boiling, Mohanty, R.L., Das, M.K., International Journal of Thermal Sciences, 2020, DOI: 10.1016/j.ijthermalsci.2020.106433
Micromechanics of engineered interphases in nacre-like composite structures, Budarapu, P.R., Thakur, S., et al., Mechanics of Advanced Materials and Structures, 2020, DOI: 10.1080/15376494.2020.1733714
Mechanical and tribology properties of Al-4.5%Cu-5%TiC metal matrix composites for light-weight structures, Mohapatra, J., Nayak, S., Mahapatra, M.M., International Journal of Lightweight Materials and Manufacture, 2020, DOI: 10.1016/j.ijlmm.2019.09.004
Effect of welding process parameters on embrittlement of Grade P92 steel using Granjon implant testing of welded joints, Saini, Nitin; Mulik, Rahul S.; Mahapatra, Manas Mohan, International Journal of Hydrogen Energy, 2020, DOI: 10.1016/j.ijhydene.2020.01.146
Study of boiling behavior of surfactant added saline water over coated surface, Mohanty, Rajiva Lochan; Swain, Abhilas; Das, Mihir Kumar, Heat and Mass Transfer, 2020, DOI: 10.1007/s00231-020-02842-9
Prediction of the aerodynamic sound generated due to flow over a cylinder performing combined steady rotation and rotary oscillations, Ganta, Naveen; Mahato, Bikash; Bhumkar, Yogesh G., Journal of the Acoustical Society of America, 2020, DOI: 10.1121/10.0000585
Dissolution of laves phase by re-austenitization and tempering of creep strength enhanced ferritic steel, Saini, N., et al., Materials Science and Technology (United Kingdom), 2020, DOI: 10.1080/02670836.2020.1724404
Numerical Investigation of Sound Generation due to Laminar Flow Past Elliptic Cylinders, Mahato, Bikash; Ganta, Naveen; Bhumkar, Yogesh G., Numerical Mathematics: Theory, Methods and Applications, 2020, DOI: 10.4208/nmtma.OA-2019-0042
Microstructural characterization and experimental investigations into two body abrasive wear behavior of Al-7079/TiC in-situ metal matrix composites, SV, S., Mahapatra, M.M., Mulik, R.S., Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2020, DOI: 10.1177/1350650119883559
Performance evaluation of various cutting fluids using MQL technique in hard turning of AISI 4340 alloy steel, Das, A., et al., Measurement: Journal of the International Measurement Confederation, 2020, DOI: 10.1016/j.measurement.2019.107079
An adaptive PID control algorithm for the two-legged robot walking on a slope, Mandava, R.K., Vundavilli, P.R., Neural Computing and Applications, 2020, DOI: 10.1007/s00521-019-04326-2
Design, development, and calibration of octagonal ring type dynamometer with FEA for measurement of drilling thrust and Torque, Gaikwad, S.V., Mahapatra, M.M., Mulik, R.S., Journal of Testing and Evaluation, 2020, DOI: 10.1520/JTE20170791
Prioritizing barriers in reverse logistics of E-commerce supply chain using fuzzy-analytic hierarchy process, Lamba, D., Yadav, D.K., Barve, A., Panda, G., Electronic Commerce Research, 2020, DOI: 10.1007/s10660-019-09333-y
Conference Proceedings (9)
Intensification of heat transfer in falling films on a bundle of horizontal tubes with microstructured surface, Volodin, O.A., et al., Journal of Physics: Conference Series, 2020, DOI: 10.1088/1742-6596/1677/1/012099
Adhesion Failure Analysis in Lap Shear Joint Specimen Subjected to Transverse Loading Made of Curved FGM, Kundu, P.K., Pradhan, A.K., Pandit, M.K., Lecture Notes in Mechanical Engineering, 2020, DOI: 10.1007/978-981-15-0772-4_26
Delamination Damage Analyses of Lap Shear Joints Made with Flat Fibre-Reinforced Polymer Composite Laminates Subjected to Transverse Load, Pati, S.K., Pradhan, A.K., Pandit, M.K., Lecture Notes in Mechanical Engineering, 2020, DOI: 10.1007/978-981-15-0772-4_21
Weld Quality Prediction of PAW by Using PSO Trained RBFNN, Srinivas, K., Vundavilli, P.R., Manzoor Hussain, M., Lecture Notes in Mechanical Engineering, 2020, DOI: 10.1007/978-981-15-1307-7_48
Microstructural and Mechanical Behaviour of Al6061/Gr/WC Hybrid Metal Matrix Composite, Gangadhara Rao, Vundavilli, P.R., Meera Saheb, K., Lecture Notes in Mechanical Engineering, 2020, DOI: 10.1007/978-981-15-1307-7_59
Effect of Red Mud on Mechanical and Microstructural Characteristics of Aluminum Matrix Composites, Samal, P., Raj, R., Mandava, R.K., Vundavilli, P.R., Lecture Notes in Mechanical Engineering, 2020, DOI: 10.1007/978-981-15-1307-7_8
Design and Analysis of 3-DOF Spatial Serial Manipulator for Warehouse Applications, Kanpartiwar, S.G., Mandava, R.K., Vundavilli, P.R., Lecture Notes in Mechanical Engineering, 2020, DOI: 10.1007/978-981-15-1307-7_19
Design of Optimal State Observer-Based Controller for 4-DOF Planar Manipulator Using PSO, Ak, J., Mandava, R.K., Vundavilli, P.R., Lecture Notes in Mechanical Engineering, 2020, DOI: 10.1007/978-981-15-1307-7_17
Design and Fabrication of Electrochemical MicroMachining (ECMM) Experimental Setup for Micro-hole Drilling, Dutta, P., Barman, A., Kumar, A., Das, M., Lecture Notes in Mechanical Engineering, 2020, DOI: 10.1007/978-981-15-0124-1_51
Book Chapters (1)
Treatment of wastewater from beverage/soft drink industry by microwave photolytic process, Swain, A., Shukla, N., Remya, N., Lecture Notes in Civil Engineering, 2020, DOI: 10.1007/978-981-15-0990-2_26
Other (2)
Perspective-Electrodeposition of Graphene Reinforced Metal Matrix Composites for Enhanced Mechanical and Physical Properties: A Review, Biswal, H. J., Vundavilli, P. R., Gupta, A., Journal of the Electrochemical Society, 2020, DOI: 10.1149/1945-7111/abbf29
Recent progress in aluminum metal matrix composites: A review on processing, mechanical and wear properties, Samal, P., Vundavilli, P.R., Meher, A., Mahapatra, M.M., et al., Journal of Manufacturing Processes, 2020, DOI: 10.1016/j.jmapro.2020.09.010
Year 2019
Journal Articles (52)
Stress transfer through the interphase in curved-fiber pullout tests of nanocomposites, Budarapu, P. R., et al., Composites Part B: Engineering, 2019, DOI: 10.1016/j.compositesb.2018.12.116
An analytical approach for generating balanced gaits of a biped robot on stairs and sloping surfaces, Mandava, R. K., Vundavilli, P. R., International Journal of Modelling, Identification and Control, 2019, DOI: 10.1504/IJMIC.2019.103979
Non-linear modeling of mechanical properties of plasma arc welded Inconel 617 plates, Srinivas, K., Vundavilli, P.R., Hussain, M.M., Materials Testing, 2019, DOI: 10.3139/120.111384
Abrasive wear analysis of RZ5/TiC in-situ composites: A statistical approach, Mehra, D., Mahapatra, M.M., Harsha, S.P., Industrial Lubrication and Tribology, 2019, DOI: 10.1108/ILT-01-2018-0018
Advances in Carbon Based Nanomaterials for Bio-Medical Applications, Gupta, Tejendra Kumar, et al., Current Medicinal Chemistry, 2019, DOI: 10.2174/0929867326666181126113605
An assessment for mechanical and microstructure behavior of dissimilar material welded joint between nuclear grade martensitic P91 and austenitic SS304 L steel, Thakare, Jayant Gopal; Pandey, Chandan; Mahapatra, Manas Mohan; Mulik, Rahul S., Journal of Manufacturing Processes, 2019, DOI: 10.1016/j.jmapro.2019.10.002
Dynamic Instability Analysis of Multifunctional Composite Structures, Kumar, Yashwantha, et al., AIAA Journal, 2019, DOI: 10.2514/1.J057479
Microstructure and mechanical properties of D-Gun sprayed Cr3C2-NiCr coating on P91 steel subjected to long term thermal exposure at 650 °C, Thakare, J. G., et al., Materials Research Express, 2019, DOI: 10.1088/2053-1591/ab5265
Binary alloy dendrite growth in presence of shrinkage induced convection, Bhattacharya, Anirban, Materials Research Express, 2019, DOI: 10.1088/2053-1591/ab56f8
Thermomechanical analysis of tungsten inert gas welding process for predicting temperature distribution and angular distortion, Narang, H.K., et al., Journal of Ship Production and Design, 2019, DOI: 10.5957/JSPD.12170057
Symmetric and asymmetric coalescence of droplets on a solid surface in the inertia-dominated regime, Pawar, N.D., et al., Physics of Fluids, 2019, DOI: 10.1063/1.5119014
Numerical simulation of beam drift effect in ultrasonic flow-meter, Choudhary, K.P., Arumuru, V., Bhumkar, Y.G., Measurement: Journal of the International Measurement Confederation, 2019, DOI: 10.1016/j.measurement.2019.06.044
Modulation of sound waves for flow past a rotary oscillating cylinder in a non-synchronous region, Ganta, N., Mahato, B., Bhumkar, Y.G., Physics of Fluids, 2019, DOI: 10.1063/1.5104286
Assessment of noise attenuation by thin reflecting barriers using dispersion relation preserving scheme, Pradhan, J., Bhumkar, Y.G., Numerical Mathematics: Theory, Methods and Applications, 2019, DOI: 10.4208/nmtma.OA-2018-0095
Prioritization of cyclone preparedness activities in humanitarian supply chains using fuzzy analytical network process, Yadav, D.K., Barve, A., Natural Hazards, 2019, DOI: 10.1007/s11069-019-03668-3
Dynamic motion planning algorithm for a biped robot using fast marching method hybridized with regression search, Mandava, R.K., Mrudul, K., Vundavilli, P.R., Acta Polytechnica Hungarica, 2019, DOI: 10.12700/APH.16.1.2019.1.10
Role of Heat Treatment on Grain Refinement and Microhardness of 9Cr–1Mo–V–Nb Steel, Pandey, C., et al., Metallography, Microstructure, and Analysis, 2019, DOI: 10.1007/s13632-019-00555-y
Analysis of barriers in implementation of Goods and Service Tax (GST) in India using interpretive structural modelling (ISM) approach, Kumar, M., Barve, A., Yadav, D.K., Journal of Revenue and Pricing Management, 2019, DOI: 10.1057/s41272-019-00202-9
Influence of TiC on dry sliding wear and mechanical properties of in situ synthesized AA5052 metal matrix composites, Samal, P.R., Vundavilli, P.R., Meher, A., Mahapatra, M.M., et al., Journal of Composite Materials, 2019, DOI: 10.1177/0021998319857124
Carbon Nanostructures for Energy and Sensing Applications, Mondal, K., et al., Journal of Nanotechnology, 2019, DOI: 10.1155/2019/1454327
Multiscale modeling of material failure: Theory and computational methods, Budarapu, P.R., et al., Advances in Applied Mechanics, 2019, DOI: 10.1016/bs.aams.2019.04.002
Vortex Shedding Optical Flowmeter based on Photonic Crystal Fiber, Arumuru, V., Dash, J.N., Jha, R., et al., Scientific Reports, 2019, DOI: 10.1038/s41598-019-40464-2
Solidification of phase change material nanocomposite inside a finned heat sink: A macro scale model of nanoparticles distribution, Sahoo, S.K., Rath, P., Das, M.K., Journal of Thermal Science and Engineering Applications, 2019, DOI: 10.1115/1.4043596
Push recovery system and balancing of a biped robot on steadily increasing slope of an inclined plane, Behera, P.K., Mandava, R.K., Vundavilli, P.R., International Journal of Computational Vision and Robotics, 2019, DOI: 10.1504/IJCVR.2019.098008
Prior-austenite grain refinement in P92 steel using double austenitization treatment, Saini, N., Mulik, R.S., Mahapatra, M.M., Materials Research Express, 2019, DOI: 10.1088/2053-1591/aae98a
On the linearity, turndown ratio and shape of the bluff body for vortex flowmeter, Venugopal, A., Agrawal, A., Prabhu, S.V., Measurement: Journal of the International Measurement Confederation, 2019, DOI: 10.1016/j.measurement.2019.02.001
Effect of post weld heat treatments on microstructure evolution and type IV cracking behavior of the P91 steel welds joint, Pandey, C., et al., Journal of Materials Processing Technology, 2019, DOI: 10.1016/j.jmatprotec.2018.10.024
Application of hybrid fast marching method to determine the real-time path for the biped robot, Mandava, R.K., Katla, M., Vundavilli, P.R., Intelligent Service Robotics, 2019, DOI: 10.1007/s11370-018-0268-7
An optimal PID controller for a biped robot walking on flat terrain using MCIWO algorithms, Mandava, R.K., Vundavilli, P.R., Evolutionary Intelligence, 2019, DOI: 10.1007/s12065-018-0184-y
A review on optimization of machining performances and recent developments in electro discharge machining, Nahak, B., Gupta, A., Manufacturing Review, 2019, DOI: 10.1051/mfreview/2018015
Characterization of slurry-based mullite coating deposited on P91 steel welds, Kanwal, S., et al., Journal of the Australian Ceramic Society, 2019, DOI: 10.1007/s41779-018-0258-4
Study of Microdroplet Growth on Homogeneous and Patterned Surfaces Using Lattice Boltzmann Modeling, Pawar, N.D., et al., Journal of Heat Transfer, 2019, DOI: 10.1115/1.4043175
Flow boiling over tube bundles with combination of plain and coated tubes, Swain, A., Das, M.K., Journal of Thermophysics and Heat Transfer, 2019, DOI: 10.2514/1.T5459
Crack patterns in heterogenous rocks using a combined phase field-cohesive interface modeling approach: A numerical study, Reinoso, J., et al., Energies, 2019, DOI: 10.3390/en12060965
Modeling and Simulation of Dropwise Condensation: A Review, Singh, M., et al., Journal of the Indian Institute of Science, 2019, DOI: 10.1007/s41745-019-0106-8
Combined Effect of Thermal Anisotropy and Forced Convection on the Growth of Binary Alloy Equiaxed Dendrites, Jakhar, A., Bhattacharya, A., Rath, P., Mahapatra, S.K., Journal of Thermal Science and Engineering Applications, 2019, DOI: 10.1115/1.4042587
A TISM based study of SSCM enablers: an Indian coal- fired thermal power plant perspective, Biswal, J.N., Muduli, K., Satapathy, S., Yadav, D.K., International Journal of Systems Assurance Engineering and Management, 2019, DOI: 10.1007/s13198-018-0752-7
A continuum mixture model for moving pulsed laser phase change process, Kar, S.P., Rath, P., International Journal of Thermal Sciences, 2019, DOI: 10.1016/j.ijthermalsci.2019.03.009
Analysis of sound generation by flow past a circular cylinder performing rotary oscillations using direct simulation approach, Ganta, N., Mahato, B., Bhumkar, Y.G., Physics of Fluids, 2019, DOI: 10.1063/1.5063642
Response surface modelling and application of fuzzy grey relational analysis to optimise the multi response characteristics of EN-19 machined using powder mixed EDM, Surekha, B., Sree Lakshmi, T., Jena, H., Samal, P., Australian Journal of Mechanical Engineering, 2019, DOI: 10.1080/14484846.2018.1564527
Effect of foam geometry on heat absorption characteristics of PCM-metal foam composite thermal energy storage systems, Dinesh, B.V.S., Bhattacharya, A., International Journal of Heat and Mass Transfer, 2019, DOI: 10.1016/j.ijheatmasstransfer.2019.01.095
Influence of filler metals and PWHT regime on the microstructure and mechanical property relationships of CSEF steels dissimilar welded joints, Saini, N., Mulik, R.S., Mahapatra, M.M., International Journal of Pressure Vessels and Piping, 2019, DOI: 10.1016/j.ijpvp.2019.01.005
Softening mechanism of P91 steel weldments using heat treatments, Pandey, C., Mahapatra, M.M., et al., Archives of Civil and Mechanical Engineering, 2019, DOI: 10.1016/j.acme.2018.10.005
Assessment of computational fracture models using Bayesian method, Hamdia, K.M., Budarapu, P.R., et al., Engineering Fracture Mechanics, 2019, DOI: 10.1016/j.engfracmech.2018.09.019
Characterisation of dissimilar P91 and P92 steel welds joint, Pandey, C., Mahapatra, M.M., Kumar, P., Materials at High Temperatures, 2019, DOI: 10.1080/09603409.2018.1537168
Study on effect of double austenitization treatment on fracture morphology tensile tested nuclear grade P92 steel, Pandey, C., Mahapatra, M.M., et al., Engineering Failure Analysis, 2019, DOI: 10.1016/j.engfailanal.2018.09.036
An investigation into fabrication and characterization of direct reaction synthesized Al-7079-TiC in situ metal matrix composites, Sujith, S.V., Mahapatra, M.M., Mulik, R.S., Archives of Civil and Mechanical Engineering, 2019, DOI: 10.1016/j.acme.2018.09.002
Impact analysis of compressor rotor blades of an aircraft engine, Sudhir Sastry, Y.B., et al., Frontiers of Structural and Civil Engineering, 2019, DOI: 10.1007/s11709-018-0493-3
Fracture behaviour of crept P91 welded sample for different post weld heat treatments condition, Pandey, C., Mahapatra, M.M., Kumar, P., Sirohi, S., Engineering Failure Analysis, 2019, DOI: 10.1016/j.engfailanal.2018.08.029
Facile synthesis of ZnO/GO nanoflowers over Si substrate for improved photocatalytic decolorization of MB dye and industrial wastewater under solar irradiation, Chauhan, P.S., Kant, R., Rai, A., Gupta, A., Bhattacharya, S., Materials Science in Semiconductor Processing, 2019, DOI: 10.1016/j.mssp.2018.08.022
Role of evolving microstructure on the mechanical behaviour of P92 steel welded joint in as-welded and post weld heat treated state, Pandey, C., Mohan Mahapatra, M., Kumar, P., Thakre, J.G., Saini, N., Journal of Materials Processing Technology, 2019, DOI: 10.1016/j.jmatprotec.2018.08.032
Mixed mode embedded circular delamination propagation in spar wingskin joint made with curved FRP composite laminates, Mishra, P.K., Pradhan, A.K., Pandit, M.K., Engineering with Computers, 2019, DOI: 10.1007/s00366-018-0626-2
Conference Proceedings (16)
Effect of chemical treatment and fumed silica coating on tensile and thermogravimetric properties of jute yarn, Maharana, S.M., Pandit, M.K., Pradhan, A.K., Materials Today: Proceedings, 2019, DOI: 10.1016/j.matpr.2019.12.184
Effect of fiber content and orientation on mechanical properties of epoxy composites reinforced with jute and Kevlar, Maharana, S.M., Samal, P., et al., Materials Today: Proceedings, 2019, DOI: 10.1016/j.matpr.2019.11.239
Investigation of impact performance of aluminum metal matrix composites by stir casting, Samal, P., Vundavilli, P.R., IOP Conference Series: Materials Science and Engineering, 2019, DOI: 10.1088/1757-899X/653/1/012047
Shrinkage induced flow and Free surface evolution during solidification of pure metal, Monde, A.D., Bhattacharya, A., Chakraborty, P.R., E3S Web of Conferences, 2019, DOI: 10.1051/e3sconf/201912806011
Investigations on the effect of electrode gap variation over pulse-electrodeposition profile, Jyoti Biswal, H., Vundavilli, P.R., Gupta, A., IOP Conference Series: Materials Science and Engineering, 2019, DOI: 10.1088/1757-899X/653/1/012046
Modeling of dendrite growth in undercooled solution sodium acetate trihydrate, Kumar, C., Monde, A.D., Bhattacharya, A., Chakraborty, P.R., E3S Web of Conferences, 2019, DOI: 10.1051/e3sconf/201912801023
Control of aeroacoustic noise generation during flow past a circular cylinder using splitter plate, Mahato, B., Ganta, N., Bhumkar, Y.G., International Congress and Exhibition on Noise Control Engineering, 2019, DOI: Not available
Characteristics of sound radiated due to flow around a rotationally oscillating cylinder, Ganta, N., Mahato, B., Bhumkar, Y.G., International Congress and Exhibition on Noise Control Engineering, 2019, DOI: Not available
Synthesis, microstructure and mechanical properties of magnesium matrix composites fabricated by stir casting, Meher, A., Mahapatra, M.M., Samal, P., Vundavilli, P.R., et al., Materials Today: Proceedings, 2019, DOI: 10.1016/j.matpr.2019.07.346
Fabrication and mechanical properties of titanium carbide reinforced aluminium composites, Samal, P., Vundavilli, P.R., Meher, A., Mahapatra, M.M., Materials Today: Proceedings, 2019, DOI: 10.1016/j.matpr.2019.07.125
Enhancement of desalination process involving two phase heat transfer: An experimental study, Mohanty, R.L., Swain, A., Das, M.K., International Heat Transfer Conference, 2019, DOI: Not available
Comparison of bundle effect during flow boiling of distilled water over plain and plasma coated tube bundles, Swain, A., Mohanty, R.L., Das, M.K., International Heat Transfer Conference, 2019, DOI: Not available
A mixture theory based enthalpy porosity model for performance study of nano enhanced PCM heat sink, Sahoo, S.K., Rath, P., Das, M.K., International Heat Transfer Conference, 2019, DOI: Not available
A Grey Relation Approach for Selection of Industrial Robot, Muduli, K., Yadav, D.K., Tripathy, S., et al., International Conference on Information Technology, 2019, DOI: 10.1109/ICIT.2018.00038
Design of near-optimal trajectories for the biped robot using MCIWO algorithm, Mandava, R.K., Vundavilli, P.R., Advances in Intelligent Systems and Computing, 2019, DOI: 10.1007/978-981-13-1592-3_27
Book Chapters (6)
PCM-Metal Foam Composite Systems for Solar Energy Storage, Bhattacharya, A., Solar Energy, 2019, DOI: 10.1007/978-981-15-0675-8_11
Micro-electro-mechanical system-based drug delivery devices, Gupta, A., Pal, P., Bioelectronics and Medical Devices: From Materials to Devices – Fabrication, Applications and Reliability, 2019, DOI: 10.1016/B978-0-08-102420-1.00010-8
Anfis modeling of boiling heat transfer over tube bundles, Swain, A., Das, M.K., Advances in Intelligent Systems and Computing, 2019, DOI: 10.1007/978-981-13-1595-4_34
An optimized path planning for the mobile robot using potential field method and PSO algorithm, Mandava, R.K., Bondada, S., Vundavilli, P.R., Advances in Intelligent Systems and Computing, 2019, DOI: 10.1007/978-981-13-1595-4_11
Optimization of Tribological Properties of Al6061/9%Gr/WC Hybrid Metal Matrix Composites Using FGRA, Ponugoti, G.R., Vundavilli, P.R., Krishna, A.G., Lecture Notes in Mechanical Engineering, 2019, DOI: 10.1007/978-981-13-6374-0_54
Optimization of Weld-Bead Parameters of Plasma Arc Welding Using GA and IWO, Srinivas, K., et al., Lecture Notes in Mechanical Engineering, 2019, DOI: 10.1007/978-981-13-6374-0_3
Year 2018
Journal Articles (55)
Joint Optimization of the Spatial and the Temporal Discretization Scheme for Accurate Computation of Acoustic Problems, Pradhan, J., Mahato, B., Bhumkar, Y.G., et al., Communications in Computational Physics, 2018, DOI: 10.4208/cicp.OA-2017-0191
Fracture Properties of Graphene-Coated Silicon for Photovoltaics, Javvaji, B., et al., Advanced Theory and Simulations, 2018, DOI: 10.1002/adts.201800097
To study the effect of stress magnitude and tool geometry on the calibration coefficients: Ring core technique, Giri, A., Pandey, C., Mahapatra, M.M., Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2018, DOI: 10.1177/0954408917737585
Mathematical model for dropwise condensation on a surface with wettability gradient, Singh, M., Kondaraju, S., Bahga, S.S., Journal of Heat Transfer, 2018, DOI: 10.1115/1.4039014
Effect of Weld Consumable Conditioning on the Diffusible Hydrogen and Subsequent Residual Stress and Flexural Strength of Multipass Welded P91 Steels, Pandey, C., et al., Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 2018, DOI: 10.1007/s11663-018-1314-8
Effect of grit blasting and thermal spraying on microstructure evolution of P91 weldment, Thakare, J.G., et al., Archives of Metallurgy and Materials, 2018, DOI: 10.24425/amm.2018.125098
Characterization of weld fusion zone for TIG welded p91 and P92 steels, Pandey, C., et al., Archives of Metallurgy and Materials, 2018, DOI: 10.24425/amm.2018.125102
Bubble departure characteristics in a horizontal tube bundle under cross flow conditions, Goel, P., et al., International Journal of Multiphase Flow, 2018, DOI: 10.1016/j.ijmultiphaseflow.2017.12.013
Achieving optimized tungsten inert gas butt welding conditions of thin cold rolled steel sheets by response surface methodology and artificial neural networks, Giri, A., Pandey, C., Mahapatra, M.M., Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2018, DOI: 10.1177/0954408917718069
A New Hot Tearing Assessment by Using Stepped Ring Core Mold and the Effect of Strontium on the Hot-Tearing Resistance of Al–6 wt% Zn Based Alloy, Sujith, S.V., Mahapatra, M.M., Mulik, R.S., Transactions of the Indian Institute of Metals, 2018, DOI: 10.1007/s12666-017-1225-4
On the growth mechanism of ZnO nano structure via aqueous chemical synthesis, Gupta, A., Bhattacharya, S., Applied Nanoscience, 2018, DOI: 10.1007/s13204-018-0782-0
Novel design of stair climbing wheelchair, Behera, P.K., Gupta, A., Journal of Mechanical Science and Technology, 2018, DOI: 10.1007/s12206-018-0938-6
Effect of welding process and PWHT on δ-ferrite evolution in dissimilar P91 and P92 steel joint, Pandey, C., Mahapatra, M.M., et al., Materials Today: Proceedings, 2018, DOI: 10.1016/j.matpr.2018.04.115
Hot corrosion behavior of plasma sprayed 8YSZ-alumina- CNT composite coating in Na2SO4–60% V2O5 molten salt environment, Thakare, J.G., Mulik, R.S., Mahapatra, M.M., Upadhyaya, R.., Ceramics International, 2018, DOI: 10.1016/j.ceramint.2018.08.217
Grain refinement of P91 steel using double austenitization treatment, Pandey, C., Mahapatra, M.M., et al., Materials Performance and Characterization, 2018, DOI: 10.1520/MPC20180094
Direct simulation of sound generation by a two-dimensional flow past a wedge, Mahato, B., Ganta, N., Bhumkar, Y.G., Physics of Fluids, 2018, DOI: 10.1063/1.5039953
Effect of cooling medium on microstructure evolution and tensile properties of creep-strength-enhanced ferritic steel, Pandey, C., et al., Science and Technology of Materials, 2018, DOI: 10.1016/j.stmat.2018.01.005
Effect of thermal anisotropy on binary alloy dendrite growth, Jakhar, A., Bhattacharya, A., Rath, P., Kumar Mahapatra, S., International Journal of Heat and Mass Transfer, 2018, DOI: 10.1016/j.ijheatmasstransfer.2018.07.141
Response Surface Methodology Based Modelling of Friction–Wear Behaviour of Al6061/9%Gr/WC MMCs and Its Optimization Using Fuzzy GRA, Ponugoti, G.R., Alluru, G.K., Vundavilli, P.R., Transactions of the Indian Institute of Metals, 2018, DOI: 10.1007/s12666-018-1377-x
Characterization of P92 Steel weldments in as-welded and PWHT conditions: Room-temperature tensile tests and microhardness measurements led to improving the ductility of the weld joints, Saini, N., Pandey, C., Mahapatra, M.M., Mulik, R.S., Welding Journal, 2018, DOI: 10.29391/2018.97.018
Enhanced thermal performance of micro heat pipes through optimization of wettability gradient, Singh, M., Datla, N.V., Kondaraju, S., Bahga, S.S., Applied Thermal Engineering, 2018, DOI: 10.1016/j.applthermaleng.2018.07.093
Numerical investigation and correlations for heat diffusion through planar ablative thermal protection systems, Kannan, S.R., Katte, S.S., Thermal Science and Engineering Progress, 2018, DOI: 10.1016/j.tsep.2018.07.008
A three dimensional adaptive multiscale method for crack growth in Silicon, Budarapu, P.R., et al., Theoretical and Applied Fracture Mechanics, 2018, DOI: 10.1016/j.tafmec.2018.06.014
Microstructural Evolution and Mechanical Properties of CSEF/M P92 Steel Weldments Welded Using Different Filler Compositions, Saini, N., Mahapatra, M.M., Mulik, R.S., Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2018, DOI: 10.1007/s11661-018-4797-7
Optimizations of RZ5-TiC magnesium matrix composite wear parameters using Taguchi approach, Mehra, D., Mahapatra, M.M., Harsha, S.P., Industrial Lubrication and Tribology, 2018, DOI: 10.1108/ILT-04-2017-0095
Near Optimal PID Controllers for the Biped Robot While Walking on Uneven Terrains, Mandava, R.K., Vundavilli, P.R., International Journal of Automation and Computing, 2018, DOI: 10.1007/s11633-018-1121-3
Effect of post weld heat treatments on fracture frontier and type IV cracking nature of the crept P91 welded sample, Pandey, C., Mahapatra, M.M., Kumar, P., Materials Science and Engineering A, 2018, DOI: 10.1016/j.msea.2018.06.038
Mixed convection inside a fluid-porous composite cavity with centrally rotating cylinder, Malla, L.K., Jena, S.K., Mahapatra, S.K., Chamkha, A.J., Heat Transfer – Asian Research, 2018, DOI: 10.1002/htj.21336
Adhesion failure propagation analyses of Spar Wingskin Joints made with curved laminated FRP composite and FGM panels, Mishra, P.K., Pradhan, A.K., Pandit, M.K., International Journal of Adhesion and Adhesives, 2018, DOI: 10.1016/j.ijadhadh.2018.05.018
Numerical study on multi layered target material subjected to impact loading, Khan, V.C., Veldanda, A.K., Balaganesan, G., Sivakumar, M.S., Latin American Journal of Solids and Structures, 2018, DOI: 10.1590/1679-78254156
Implementation of modified chaotic invasive weed optimization algorithm for optimizing the PID controller of the biped robot, Mandava, R.K., Vundavilli, P.R., Sādhanā – Academy Proceedings in Engineering Sciences, 2018, DOI: 10.1007/s12046-018-0851-9
A comparative study of transverse shrinkage stresses and residual stresses in P91 welded pipe including plasticity error, Pandey, C., Mahapatra, M.M., Kumar, P., Archives of Civil and Mechanical Engineering, 2018, DOI: 10.1016/j.acme.2018.02.007
Flow boiling under variable heat flux along the height over coated tube bundle, Swain, A., Lochan Mohanty, R., Kumar Das, M., Experimental Thermal and Fluid Science, 2018, DOI: 10.1016/j.expthermflusci.2018.04.010
Effect of wear parameters on dry abrasive wear of RZ5-TiC in situ composite, Mehra, D., Mahapatra, M.M., Harsha, S.P., Industrial Lubrication and Tribology, 2018, DOI: 10.1108/ILT-12-2016-0306
Thermal performance of mixed tube bundle composed of circular and elliptical tubes, Mohanty, R.L., Swain, A., Das, M.K., Thermal Science and Engineering Progress, 2018, DOI: 10.1016/j.tsep.2018.02.009
Comparative study of autogenous tungsten inert gas welding and tungsten arc welding with filler wire for dissimilar P91 and P92 steel weld joint, Pandey, C., Mahapatra, M.M., Kumar, P., Saini, N., Materials Science and Engineering A, 2018, DOI: 10.1016/j.msea.2017.12.039
Study of Solid Particle Erosion Wear Behavior of Bamboo Fiber Reinforced Polymer Composite with Cenosphere Filler, Jena, H., Pradhan, A.K., Pandit, M.K., Advances in Polymer Technology, 2018, DOI: 10.1002/adv.21718
On study of effect of varying tempering temperature and notch geometry on fracture surface morphology of P911 (9Cr-1Mo-1W-V-Nb) steel, Saini, N., et al., Engineering Failure Analysis, 2018, DOI: 10.1016/j.engfailanal.2017.12.013
Hybrid quasi-steady thermal lattice Boltzmann model for studying the rheology of surfactants contaminated emulsions, Hasan, W.F., et al., Computers and Fluids, 2018, DOI: 10.1016/j.compfluid.2018.01.017
Some studies on P91 steel and their weldments, Pandey, C., et al., Journal of Alloys and Compounds, 2018, DOI: 10.1016/j.jallcom.2018.01.120
Evolution of nano-size precipitates during tempering of 9Cr-1Mo-1W-V-Nb steel and their influence on mechanical properties, Saini, N., et al., Materials Science and Engineering A, 2018, DOI: 10.1016/j.msea.2017.11.011
Effect of strain rate and notch geometry on tensile properties and fracture mechanism of creep strength enhanced ferritic P91 steel, Pandey, C., et al., Journal of Nuclear Materials, 2018, DOI: 10.1016/j.jnucmat.2017.10.037
Autogenous tungsten inert gas and gas tungsten Arc with filler welding of dissimilar P91 and P92 steels, Pandey, C., et al., Journal of Pressure Vessel Technology, Transactions of the ASME, 2018, DOI: 10.1115/1.4039127
Processing of RZ5-10wt%TiC in-situ magnesium matrix composite, Mehra, D., Mahapatra, M.M., Harsha, S.P., Journal of Magnesium and Alloys, 2018, DOI: 10.1016/j.jma.2018.01.002
Segmenting critical success factors of humanitarian supply chains using fuzzy DEMATEL, Yadav, D.K., Barve, A., Benchmarking, 2018, DOI: 10.1108/BIJ-10-2016-0154
A brief study on δ-ferrite evolution in dissimilar P91 and P92 steel weld joint and their effect on mechanical properties, Pandey, C., et al., Archives of Civil and Mechanical Engineering, 2018, DOI: 10.1016/j.acme.2017.12.002
Vortex dynamics of a trapezoidal bluff body placed inside a circular pipe, Venugopal, A., Agrawal, A., Prabhu, S.V., Journal of Turbulence, 2018, DOI: 10.1080/14685248.2017.1377345
Study on the effect of ageing on laves phase evolution and their effect on mechanical properties of P92 steel, Saini, N., Mulik, R.S., Mahapatra, M.M., Materials Science and Engineering A, 2018, DOI: 10.1016/j.msea.2018.01.035
Dissimilar joining of CFEF steels using autogenous tungsten-inert gas welding and gas tungsten arc welding and their effect on δ-ferrite evolution and mechanical properties, Pandey, C., et al., Journal of Manufacturing Processes, 2018, DOI: 10.1016/j.jmapro.2017.11.020
Hybrid Cooling System for Electronics Equipment During Power Surge Operation, Sahoo, S.K., Das, M.K., Rath, P., IEEE Transactions on Components, Packaging and Manufacturing Technology, 2018, DOI: 10.1109/TCPMT.2017.2756919
Homogenization of P91 weldments using varying normalizing and tempering treatment, Pandey, C., et al., Materials Science and Engineering A, 2018, DOI: 10.1016/j.msea.2017.10.086
Effect of carbon nanotubes and aluminum oxide on the properties of a plasma sprayed thermal barrier coating, Thakare, J.G., Mulik, R.S., Mahapatra, M.M., Ceramics International, 2018, DOI: 10.1016/j.ceramint.2017.09.196
Performance of porous coated 5 × 3 staggered horizontal tube bundle under flow boiling, Swain, A., Das, M.K., Applied Thermal Engineering, 2018, DOI: 10.1016/j.applthermaleng.2017.09.038
Conference Proceedings (26)
Delamination Damage Analyses of Lap Shear Joints made with Flat Fibre Reinforced Polymer Composite Laminates Subjected to Transverse Load, Pati, S.K., Pradhan, A.K., Pandit, M.K., International Journal of Fracture, 2018, DOI: Not available
Adhesion Failure Analyses of Lap Shear Joints Made with FGM adherends, Kundu, P.K., Pradhan, A.K., Pandit, M.K., International Society of Theoretical and Applied Mechanics, 2018, DOI: Not available
Analysis of Aerodynamic Noise for Flow past a Circular Cylinder Performing Rotary Oscillations in the Non-Synchronization Region, Ganta, N., Mahato, B., Bhumkar, Y.G., National Convention of Aerospace Engineers, 2018, DOI: Not available
Effect of Splitter Plate on the Sound Generation during Flow Past Circular Cylinder, Mahato, B., Ganta, N., Bhumkar, Y.G., WESPAC-2018, 2018, DOI: Not available
Effect of Axis-Ratio on the Sound Generation from Elliptic Cylinder, Mahato, B., Ganta, N., Bhumkar, Y.G., Fluid Mechanics and Fluid Power (FMFP-2018), 2018, DOI: Not available
Aerodynamic Noise Behavior due to Flow Over Oval–Shaped Cylinders, Ganta, N., Mahato, B., Bhumkar, Y.G., WESPAC-2018, 2018, DOI: Not available
On the Interaction of Separation Bubbles in the Near Wake of a Cylinder, Mahapatra, B., Sathyanarayana, A., Arumuru, V., International Symposium on Fluid-Structure Interactions, Flow-Sound Interactions, Flow-Induced Vibration & Noise, 2018, DOI: Not available
Study of combined effect of thermal anisotropy and forced convection on the growth of an equiaxed dendritic crystal, Jakhar, A., Bhattacharya, A., Rath, P., Mahapatra, S.K., et al., International Conference on Computational Methods for Thermal Problems, 2018, DOI: Not available
Optimization of wettability gradient for enhancement of thermal performance of micro heat pipes, Singh, M., et al., International Conference on Nanochannels, Microchannels, and Minichannels, 2018, DOI: Not available
Optimization of flavour ester production through artificial bee colony algorithm: ABC optimization approach for flavour ester production, Garlapati, V.K., Vundavilli, P.R., Banerjee, R., 4th International Conference on Image Information Processing, 2018, DOI: 10.1109/ICIIP.2017.8313694
Modelling of microstructure evolution with shrinkage convection, Bhattacharya, A., International Conference on Computational Methods for Thermal Problems, 2018, DOI: Not available
Effect of selective coating on the top heat loss characteristics of trapezoidal cavity: A computational approach, Ray, S., et al., IOP Conference Series: Materials Science and Engineering, 2018, DOI: 10.1088/1757-899X/377/1/012026
Effect of laser scan speed on melt pool evolution during selective laser melting, Swain, A., Bhattacharya, A., Khan, P.M., International Conference on Computational Methods for Thermal Problems, 2018, DOI: Not available
Analysing the Friction Stir Welded Joints of AA2219 Al-Cu Alloy in Different Heat-Treated-State, Venkateswarlu, D., et al., IOP Conference Series: Materials Science and Engineering, 2018, DOI: 10.1088/1757-899X/330/1/012074
A thermal model for waste heat recovery using PCM, Sharma, A., Vasireddy, S., Rath, P., International Conference on Computational Methods for Thermal Problems, 2018, DOI: Not available
Numerical analysis of an acoustic field behavior for flow past corrugated cylinders, Naveen, G., Mahato, B., Bhumkar, Y.G., 25th International Congress on Sound and Vibration 2018, ICSV 2018: Hiroshima Calling, 2018, DOI: Not available
Analysis of acoustic behavior from flow past elliptic cylinders using DRP scheme, Mahato, B., Naveen, G., Bhumkar, Y.G., 25th International Congress on Sound and Vibration 2018, ICSV 2018: Hiroshima Calling, 2018, DOI: Not available
Influence of cross flow on the propagation and steering of acoustic field, Prasad, C.K., Venugopal, A., Bhumkar, Yogesh G., 25th International Congress on Sound and Vibration 2018, ICSV 2018: Hiroshima Calling, 2018, DOI: Not available
Modeling of wear process parameters of in-situ RZ5-10wt%TiC Composite using artificial neural network, Mehra, D., Sujith, S.V., Mahapatra, M.M., Harsha, S.P., Materials Today: Proceedings, 2018, DOI: 10.1016/j.matpr.2018.10.206
Tuning of PID controller parameters of a biped Robot using IWO algorithm, Mandava, R.K., Vundavilli, P.R., ACM International Conference Proceeding Series, 2018, DOI: 10.1145/3191477.3191504
An Efficient Path Planning Algorithm for Biped Robot using Fast Marching Method, Mrudul, K., Mandava, R.K., Vundavilli, P.R., Procedia Computer Science, 2018, DOI: 10.1016/j.procs.2018.07.015
Modeling of Plasma Arc Welding of Inconel 617 Super Alloy Plates using RSM, Srinivas, K., Manzoor Hussain, M., IOP Conference Series: Materials Science and Engineering, 2018, DOI: 10.1088/1757-899X/390/1/012048
Optimization of Wear Phenomenon of Al6061/Gr MMCs using Non-Traditional Optimization Methods, Gangadhara Rao, P., Gopala Krishna, A., Vundavilli, P.R., IOP Conference Series: Materials Science and Engineering, 2018, DOI: 10.1088/1757-899X/390/1/012055
Repair of through thickness corrosion/leaking defects in corroded pipelines using Fiber Reinforced Polymer overwrap, Nitheesh Kumar, P., Khan, V.C., Balaganesan, G., Pradhan, A.K., Sivakumar, M.S., IOP Conference Series: Materials Science and Engineering, 2018, DOI: 10.1088/1757-899X/346/1/012016
Abrasive wear behavior of in-situ RZ5-10wt%TiC composite, Mehra, D., Mahapatra, M.M., Harsha, S.P., AIP Conference Proceedings, 2018, DOI: 10.1063/1.5032358
Whole body motion generation of 18-DOF biped robot on flat surface during SSP & DSP, Mandava, R.K., Vundavilli, P.R., International Journal of Modelling, Identification and Control, 2018, DOI: 10.1504/IJMIC.2018.091246
Book Chapters (1)
Squeeze casting parameter optimization using swarm intelligence and evolutionary algorithms, Manjunath Patel, et al., Critical Developments and Applications of Swarm Intelligence, 2018, DOI: 10.4018/978-1-5225-5134-8.ch010
Year 2017
Journal Articles (42)
Optimization of weld bonding process parameters of austenitic stainless steel 304L and low carbon steel sheet dissimilar joints, Boriwal, L., Sarviya, R.M., Mahapatra, M.M., Journal of Adhesion Science and Technology, 2017, DOI: 10.1080/01694243.2016.1266844
Nanofillers Reinforced Polymer Composites Wrap to Repair Corroded Steel Pipe Lines, Chandra Khan, V., Kumar Pradhan, A., et al., Journal of Pressure Vessel Technology, 2017, DOI: 10.1115/1.4036534
Study on Effect of Process Variables on Distributed Compositional Characteristics in Metallurgically and Mechanically Bonded Claddings, Yadav, R., et al., Transactions of the Indian Institute of Metals, 2017, DOI: 10.1007/s12666-016-0977-6
Role of thermal radiation in buoyant convection of industrial dusty air: A numerical investigation, Jena, S.K., Mahapatra, S.K., Heat Transfer Research, 2017, DOI: 10.1615/HeatTransRes.2016007343
On the measurement of sub-surface residual stresses in SS 304L welds by dry ring core technique, Giri, A., Mahapatra, M.M., Measurement: Journal of the International Measurement Confederation, 2017, DOI: 10.1016/j.measurement.2017.04.043
Numerical Study on Phase Change of Water Flowing Across Two Heated Circular Cylinders in Tandem Arrangement, Dhar, B.K., et al., Heat Transfer – Asian Research, 2017, DOI: 10.1002/htj.21236
Microstructure characterization and charpy toughness of P91 weldment for as-welded, post-weld heat treatment and normalizing & tempering heat treatment, Pandey, C., et al., Metals and Materials International, 2017, DOI: 10.1007/s12540-017-6850-2
Microstructure and mechanical property relationship for different heat treatment and hydrogen level in multi-pass welded P91 steel joint, Pandey, C., et al., Journal of Manufacturing Processes, 2017, DOI: 10.1016/j.jmapro.2017.06.009
Investigation of influential factors of green supply chain management in Indian mining industries: An empirical study, Muduli, K., et al., International Journal of Business Excellence, 2017, DOI: 10.1504/IJBEX.2017.084453
Effect of normalization and tempering on microstructure and mechanical properties of V-groove and narrow-groove P91 pipe weldments, Pandey, C., et al., Materials Science and Engineering A, 2017, DOI: 10.1016/j.msea.2016.12.079
Effect of creep phenomena on room-temperature tensile properties of cast & forged P91 steel, Pandey, C., et al., Engineering Failure Analysis, 2017, DOI: 10.1016/j.engfailanal.2017.05.025
Compliance choice analysis for India's thermal power sector in the market-based energy efficiency regime, Sahoo, N.R., Mohapatra, P.K.J., Mahanty, B., Energy Policy, 2017, DOI: 10.1016/j.enpol.2017.06.012
Characterization of microstructure of HAZs in as-welded and service condition of P91 pipe weldments, Pandey, C., et al., Metals and Materials International, 2017, DOI: 10.1007/s12540-017-6394-5
Estimation of strength and wear properties of Mg/SiC nanocomposite fabricated through FSP route, Deepan, M., et al., Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2017, DOI: 10.1007/s40430-017-0757-1
Nano-size Particle Evolution During Heat Treatment of P91 Steel and Their Effect on Micro Hardness, Pandey, C., et al., Transactions of the Indian Institute of Metals, 2017, DOI: 10.1007/s12666-017-1215-6
Effect of Normalizing Temperature on Fracture Characteristic of Tensile and Impact Tested Creep Strength-Enhanced Ferritic P92 Steel, Saini, N., Pandey, C., Mahapatra, M.M., Journal of Materials Engineering and Performance, 2017, DOI: 10.1007/s11665-017-2988-9
Investigation of incompressible flow past two circular cylinders of different diameters, Bhumkar, Y.G., et al., Defence Science Journal, 2017, DOI: 10.14429/dsj.67.11087
A nonlocal adaptive discrete empirical interpolation method combined with modified hp-refinement for order reduction of molecular dynamics systems, Ojo, S.O., Budarapu, P.R., Paggi, M., Computational Materials Science, 2017, DOI: 10.1016/j.commatsci.2017.08.022
Assessment of Thermal Damage During Skin Tumor Treatment Using Thermal Wave Model: A Realistic Approach, Verma, A.K., Rath, P., Mahapatra, S.K., Journal of Heat Transfer, 2017, DOI: 10.1115/1.4036015
A comparative study of ductile-brittle transition behavior and fractography of P91 and P92 steel, Saini, N., et al., Engineering Failure Analysis, 2017, DOI: 10.1016/j.engfailanal.2017.06.044
Improvement in the performance of the vortex flowmeter using contraction cone, Mohadikar, K., et al., Measurement: Journal of the International Measurement Confederation, 2017, DOI: 10.1016/j.measurement.2017.07.050
Bending and free vibration response of sandwich laminate under hygrothermal load using improved zigzag theory, Padhi, A., Pandit, M.K., Journal of Strain Analysis for Engineering Design, 2017, DOI: 10.1177/0309324717714710
Microstructure and transverse shrinkage stress analysis in GTA welds of P91 steel pipe, Pandey, C., et al., International Journal of Steel Structures, 2017, DOI: 10.1007/s13296-017-6030-8
Effect of diffusible hydrogen content on embrittlement of P92 steel, Saini, N., Pandey, C., Mahapatra, M.M., International Journal of Hydrogen Energy, 2017, DOI: 10.1016/j.ijhydene.2017.05.214
Study on Hydrogen-Assisted Cracking in High-Strength Steels by Using the Granjon Implant Test, Yadav, U., et al., Metallography, Microstructure, and Analysis, 2017, DOI: 10.1007/s13632-017-0351-z
Numerically estimating acoustic transmission loss of a reactive muffler with and without mean flow, Jena, D.P., Panigrahi, S.N., Measurement: Journal of the International Measurement Confederation, 2017, DOI: 10.1016/j.measurement.2017.05.065
Microstructure Evolution and Mechanical Properties of Dissimilar Welded Joint of P911 and P92 Steel for Subsequent PWHT and N&T Treatment, Saini, N., Pandey, C., Mahapatra, M.M., Transactions of the Indian Institute of Metals, 2017, DOI: 10.1007/s12666-017-1145-3
Optimization of vibratory welding process parameters using response surface methodology, Singh, P.K., et al., Journal of Mechanical Science and Technology, 2017, DOI: 10.1007/s12206-017-0446-0
Characterization of Cast and Forged (C&F) Gr. 91 Steel in Different Heat Treatment Condition, Pandey, C., et al., Transactions of the Indian Institute of Metals, 2017, DOI: 10.1007/s12666-017-1144-4
Evaluation of optimum configuration of adhesively bonded reverse bent joints, Bodepudi, R., Hughes, D.J., Pradhan, A.K., International Journal of Adhesion and Adhesives, 2017, DOI: 10.1016/j.ijadhadh.2017.04.003
Enhanced photocatalytic performance of vertically grown ZnO nanorods decorated with metals (Al, Ag, Au, and Au–Pd) for degradation of industrial dye, Chauhan, P., Rai, A., Gupta, A., Bhattacharya, S., Materials Research Express, 2017, DOI: 10.1088/2053-1591/aa6d31
Microstructure-based assessment of creep rupture behaviour of cast-forged P91 steel, Pandey, C., et al., Materials Science and Engineering A, 2017, DOI: 10.1016/j.msea.2017.04.037
Molecular dynamics study of the nanosized droplet spreading: The effect of the contact line forces on the kinetic energy dissipation, Yoon, H.M., et al., Applied Surface Science, 2017, DOI: 10.1016/j.apsusc.2017.03.043
Pool boiling of distilled water over tube bundle with variable heat flux, Swain, A., Mohanty, R.L., Das, M.K., Heat and Mass Transfer/Waerme- und Stoffuebertragung, 2017, DOI: 10.1007/s00231-017-1997-4
Investigations on Bluff Bodies as Improved Vortex Shedders Placed Inside a Circular Pipe, Venugopal, A., Agrawal, A., Prabhu, S.V., Journal of Fluids Engineering, Transactions of the ASME, 2017, DOI: 10.1115/1.4035465
Analysis of socioeconomic vulnerability for cyclone-affected communities in coastal Odisha, India, Yadav, D.K., Barve, A., International Journal of Disaster Risk Reduction, 2017, DOI: 10.1016/j.ijdrr.2017.02.003
Characterization and evaluation of mechanical properties of CSEF P92 steel for varying normalizing temperature, Saini, N., Pandey, C., Mahapatra, M.M., Materials Science and Engineering A, 2017, DOI: 10.1016/j.msea.2017.02.022
Energy-Absorbing Capacity of Polyurethane/SiC/Glass-Epoxy Laminates under Impact Loading, Balaganesan, G., Akshaj Kumar, V., Khan, V.C., Srinivasan, S.M., Journal of Engineering Materials and Technology, Transactions of the ASME, 2017, DOI: 10.1115/1.4035617
Flow boiling of distilled water over plain tube bundle with uniform and varying heat flux along the height of the tube bundle, Swain, A., Das, M.K., Experimental Thermal and Fluid Science, 2017, DOI: 10.1016/j.expthermflusci.2016.11.022
Enhancement of thermal performance of micro heat pipes using wettability gradients, Singh, M., Kondaraju, S., Bahga, S.S., International Journal of Heat and Mass Transfer, 2017, DOI: 10.1016/j.ijheatmasstransfer.2016.08.062
Erosion Response of Thixoformed A356-5TiB2 in situ Composite Using Taguchi's Experimental Design, Kumar, S.D., et al., Tribology Transactions, 2017, DOI: 10.1080/10402004.2016.1145775
Conference Proceedings (14)
Low velocity impact behavior of SiC/PU/GFRP laminates, Akshaj Kumar, V., Khan, V.C., et al., Key Engineering Materials, 2017, DOI: 10.4028/www.scientific.net/KEM.725.122
[Title not available], Swain, Abhilas; Das, Mihir Kumar, Soft Computing for Problem Solving 2017, IIT Bhubaneswar, 2017, DOI: Not available
[Title not available], Shah, S., Mahapatra, S.K., RMITU Melbourne, Australia, 2017, DOI: Not available
[Title not available], Sahoo, S., Das, M.K., Rath, P., Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), BITS Pilani, Hyderabad, 2017, DOI: Not available
[Title not available], Mandava, Ravi Kumar; Vundavilli, Pandu R., SocPros-2017, IIT Bhubaneswar, India, 2017, DOI: Not available
[Title not available], Mahato, B., Bhumkar, Y.G., INTER-NOISE 2017 – 46th International Congress and Exposition on Noise Control Engineering: Taming Noise and Moving Quiet, 2017, DOI: Not available
[Title not available], Das, S., Barve, A., International Journal of Arts and Sciences, British School at Rome, 2017, DOI: Not available
[Title not available], Bartarya, G., et al., Proceedings of the 10th International Conference on Precision, Meso, Micro and Nano Engineering, IIT Madras, Chennai, 2017, DOI: Not available
Automated detection of nonphysiological artifacts in polysomnographic EEG using conventional signal processing techniques, Dora, C., Biswal, P.K., IEEE Region 10 Conference, 2017, DOI: 10.1109/TENCON.2017.8228106
Effect of Binder and Mold parameters on Collapsibility and Surface Finish of Gray Cast Iron No-bake Sand Molds, Srinivasulu Reddy, K., Venkata Reddy, V., Mandava, R.K., IOP Conference Series: Materials Science and Engineering, 2017, DOI: 10.1088/1757-899X/225/1/012246
Numerical investigation of the acoustic field around corrugated cylinders of different geometries, Mahato, B., Bhumkar, Y.G., INTER-NOISE 2017 – 46th International Congress and Exposition on Noise Control Engineering: Taming Noise and Moving Quiet, 2017, DOI: Not available
Optimization of Thixoforging process parameters of A356 alloy using Taguchi's experimental design and DEFORM Simulation, Deepak Kumar, S., et al., Materials Today: Proceedings, 2017, DOI: 10.1016/j.matpr.2017.06.307
Study on influence of hip trajectory on the balance of a biped robot, Mandava, R.K., Vundavilli, P.R., Lecture Notes in Electrical Engineering, 2017, DOI: 10.1007/978-981-10-1540-3_28
Book Chapters (1)
Carbon based Nano-materials for Water Remediation, Mondal, K.; Gupta, Ankur, Nanoscale Research Letters, 2017, DOI: Not available
Other (2)
Multiscale Methods for Fracture: A Review, Budarapu, P.R., Rabczuk, T., Journal of the Indian Institute of Science, 2017, DOI: 10.1007/s41745-017-0041-5
A critical review on bubble dynamics parameters influencing boiling heat transfer, Mohanty, R.L., Das, M.K., Renewable and Sustainable Energy Reviews, 2017, DOI: 10.1016/j.rser.2017.04.092
Year 2016
Journal Articles (25)
Investigation of influential strength of factors on GSCM adoption in mining industries operating in India, Govindan, K., Muduli, K., Devika, K., Barve, A., Resources, Conservation and Recycling, 2016, DOI: 10.1016/j.resconrec.2015.05.022
Hydrogen induced cold cracking of creep resistant ferritic P91 steel for different diffusible hydrogen levels in deposited metal, Pandey, C., et al., International Journal of Hydrogen Energy, 2016, DOI: 10.1016/j.ijhydene.2016.07.202
Design of Auction Parameters to Reduce the Effect of Collusion, Padhi, S.S., Wagner, S.M., Mohapatra, P.K.J., Decision Sciences, 2016, DOI: 10.1111/deci.12159
Diffusible Hydrogen Level in Deposited Metal and Their Effect on Tensile Properties and Flexural Strength of P91 Steel, Pandey, C., et al., Journal of Engineering Materials and Technology, 2016, DOI: 10.1115/1.4035764
Review on Land-Based Wheeled Robots, Rasam, H.R., MATEC Web of Conferences, 2016, DOI: 10.1051/matecconf/20165301058
Multi-Objective Optimization of Squeeze Casting Process using Genetic Algorithm and Particle Swarm Optimization, Patel, G.C.M., et al., Archives of Foundry Engineering, 2016, DOI: 10.1515/afe-2016-0073
Investigation of the influential strength of factors on adoption of green supply chain management practices: An Indian mining scenario, Govindan, K., et al., Resources, Conservation and Recycling, 2016, DOI: 10.1016/j.resconrec.2015.05.022
Effect of Reynolds number on phase change of water flowing across two heated circular cylinders in tandem arrangement, Dhar, B.K., et al., Journal of Computational Multiphase Flows, 2016, DOI: 10.1177/1757482X16634198
A similarity solution for phase change of binary alloy with shrinkage or expansion, Jakhar, A., Rath, P., Mahapatra, S.K., Engineering Science and Technology, an International Journal, 2016, DOI: 10.1016/j.jestch.2016.04.002
Modeling Post-disaster Challenges of Humanitarian Supply Chains: A TISM Approach, Yadav, D.K., Barve, A., Global Journal of Flexible Systems Management, 2016, DOI: 10.1007/s40171-016-0134-4
Inter-laminar delamination analyses of Spar Wingskin Joints made with flat FRP composite laminates, Mishra, P.K., Pradhan, A.K., Pandit, M.K., International Journal of Adhesion and Adhesives, 2016, DOI: 10.1016/j.ijadhadh.2016.02.001
Effect of Material Anisotropy on Delamination Damage in Adhesive Bonded Lap Shear Joints Made with Curved Laminated FRP Composite Panels, Parida, S.K., Pradhan, A.K., Iranian Journal of Science and Technology – Transactions of Mechanical Engineering, 2016, DOI: 10.1007/s40997-016-0018-4
A Conduction–Radiation Mixture Model for Laser-Assisted Phase Change of Semitransparent Material, Kar, S.P., Rath, P., Heat Transfer Engineering, 2016, DOI: 10.1080/01457632.2016.1139973
Engineering droplet navigation through tertiary-junction microchannels, Baig, M., et al., Microfluidics and Nanofluidics, 2016, DOI: 10.1007/s10404-016-1828-9
Numerical study on phase change of water flowing across two heated rotating circular cylinders in tandem arrangement, Dhar, B.K., et al., Journal of Computational Multiphase Flows, 2016, DOI: 10.1177/1757482X16674218
Development of a High-Resolution Scheme for Solving the PNP-NS Equations in Curved Channels, Sheu, T.W.H., Bhumkar, Y.G., Yuan, S.T., Syue, S.C., Communications in Computational Physics, 2016, DOI: 10.4208/cicp.230914.040615a
Capillary Displacement of Viscous Liquids in Geometries with Axial Variations, Budaraju, A., Phirani, J., Kondaraju, S., Bahga, S.S., Langmuir, 2016, DOI: 10.1021/acs.langmuir.6b02788
Experimental investigations and multi-response optimisation of wire electric discharge machining of hypereutectic Al-Si alloys, Babu, D.M., et al., International Journal of Manufacturing Research, 2016, DOI: 10.1504/IJMR.2016.079460
Numerical study of phase change material based orthotropic heat sink for thermal management of electronics components, Sahoo, S.K., Rath, P., Das, M.K., International Journal of Heat and Mass Transfer, 2016, DOI: 10.1016/j.ijheatmasstransfer.2016.07.063
Convective Heat Transfer and Pressure Drop over Elliptical and Flattened Tube, Swain, A., Das, M.K., Heat Transfer – Asian Research, 2016, DOI: 10.1002/htj.21172
Introducing passive acoustic filter in acoustic based condition monitoring: Motor bike piston-bore fault identification, Jena, D.P., Panigrahi, S.N., Mechanical Systems and Signal Processing, 2016, DOI: 10.1016/j.ymssp.2015.09.039
Energy absorption of repaired composite laminates subjected to impact loading, Balaganesan, G., Chandra Khan, V., Composites Part B: Engineering, 2016, DOI: 10.1016/j.compositesb.2016.04.083
Interaction of short pulse collimated irradiation with inhomogeneity: An accurate model, Verma, A.K., Rath, P., Mahapatra, S.K., International Communications in Heat and Mass Transfer, 2016, DOI: 10.1016/j.icheatmasstransfer.2015.08.025
Delamination propagation analyses of spar wingskin joints made with curved laminated FRP composite panels, Mishra, P.K., Pradhan, A.K., Pandit, M.K., Journal of Adhesion Science and Technology, 2016, DOI: 10.1080/01694243.2015.1121851
Behaviour of sandwich laminates subjected to thermal loading using higher-order zig-zag theory, Padhi, A., Pandit, M.K., Journal of Sandwich Structures and Materials, 2016, DOI: 10.1177/1099636215613487
Conference Proceedings (12)
Study of Pool Boiling of Distilled Water on 5×3 Staggered Tube Bundle under Variable Heat Flux, Swain, A., Das, M.K., Arijit, 6th International & 43rd National Conference on Fluid Mechanics and Fluid Power, 2016, DOI: Not available
Experimental Analysis of a Hybrid PCM Based Heat Sink, Sahoo, S.K., Das, M.K., Rath, P., [Source not available], 2016, DOI: Not available
Experimental Study of Vapour Bubbles Departure Characteristics for a Cylindrical Heater Under Cross Flow Conditions, Goel, P., et al., 6th International & 43rd National Conference on Fluid Mechanics and Fluid Power (FMFP-2016), 2016, DOI: Not available
On the development of a H-grid Topology Parallel Solver for Transonic Flows, Ganta, N., et al., 6th International & 43rd National Fluid Mechanics & Fluid Power, 2016, DOI: Not available
Analysis of enablers for disaster waste management, Yadav, D.K., Barve, A., 3rd International conference on innovation in business and management, 2016, DOI: 10.18178/ijimt.2016.7.5.670
Chromite and silica based resin bonded sand mould systems: A performance comparison, Surekha, B., et al., 2nd International Conference on Design, Analysis, Manufacturing and Simulation, 2016, DOI: Not available
Improving Shock Resolving Ability via De-aliasing for DNS of Viscous Burgers' Equation, Sinhababu, A., et al., 6th International & 43rd National Fluid Mechanics & Fluid Power, 2016, DOI: Not available
Role of knowledge management in disaster risk mitigation in India, Barve, A., Yadav, D.K., National Disaster Management, 2016, DOI: Not available
Prediction of Welded Joint Strength in Plasma Arc Welding: A Comparative Study Using Back-Propagation and Radial Basis Neural Networks, Srinivas, K., et al., IOP Conference Series: Materials Science and Engineering, 2016, DOI: 10.1088/1757-899X/149/1/012033
Forward and inverse kinematic based full body gait generation of biped robot, Mandava, R.K., Vundavilli, P.R., International Conference on Electrical, Electronics, and Optimization Techniques, ICEEOT 2016, 2016, DOI: 10.1109/ICEEOT.2016.7755317
Information theoretic approach using neural network for determining radiometer observations from radar and vice versa, Kannan, S.R., Chandrasekar, V., Proceedings of SPIE – The International Society for Optical Engineering, 2016, DOI: 10.1117/12.2223432
Thermal wave model for analysis of multilayer tissue medium in presence of inhomogeneity in laser tissue treatment, Verma, A.K., Mahapatra, S.K., ASME 2016 5th International Conference on Micro/Nanoscale Heat and Mass Transfer, MNHMT 2016, 2016, DOI: 10.1115/MNHMT2016-6464
Book Chapters (1)
Development of path tracking control algorithm for a 4 DOF spatial manipulator using PID controller, Bonikila, P.R., Mandava, R.K., Vundavilli, P.R., Mathematical Concepts and Applications in Mechanical Engineering and Mechatronics, 2016, DOI: 10.4018/978-1-5225-1639-2.ch015
Other (1)
Application of TCE-PCM based heat sinks for cooling of electronic components: A review, Sahoo, S.K., Das, M.K., Rath, P., Renewable and Sustainable Energy Reviews, 2016, DOI: 10.1016/j.rser.2015.12.238
Projects
User Project Code
Title
PI Name
School/Dept.
Project Type
Start Date
End Date
Status
R/RP596
Design and development of robot components for safe interaction with human workers
Vimalesh Muralidharan
School of Mechanical Sciences
Seed Grant Project
14-08-2026
13-08-2028
Running
R/RP584
Multiphysics-simulation and experimental-based development of hydrogen-lubricated bearings for green hydrogen compressors
Manas Ranjan Pattnayak
School of Mechanical Sciences
Research
2/7/2026
1/7/2029
Running
R/RP574
Gas stratification model development and Benchmarking of containment module of PRABHAVINI Code
Maneesh Punetha
School of Mechanical Sciences
Research
17-06-2026
16-06-2029
Running
R/RP572
Study on TET and Energy Harvesting Through Networks of Stochastically Parametered Vibro-Impact Systems
Rahul Kumar
School of Mechanical Sciences
Research
8/6/2026
7/6/2029
Running
R/RP594
Development of AI-based Automated Diagnosis Tool for Rice Insect Pests, Diseases and Real-Time Digital Advisories
Satish Kumar Panda
School of Mechanical Sciences
Research
1/4/2026
31-03-2027
Running
R/RP573
Development of an Integrated Multi-Scale Computational Platform for Modelling Laser Additive Manufacturing Processes
Anirban Bhattacharya
School of Mechanical Sciences
Research
26-03-2026
25-03-2031
Running
R/RP561
Titanium alloy based cranial implant development using heatassisted incremental forming combined with post-forming heattreatment strategy to mitigate residual stress, dimensional inaccuracies and surface topography issues
Gaurav Bartarya
School of Mechanical Sciences
Research
21-03-2026
20-03-2029
Running
R/RP543
Towards development of hydrogen systems for mobility application
Amrit Bikram Sahu
School of Mechanical Sciences
Research
28-02-2026
27-02-2031
Running
R/RP547
Fabrication of dual hardness steel for armor application using laser direct energy deposition and investigation into its mechanical properties
Suvradip Mullick
School of Mechanical Sciences
Research
9/1/2026
8/1/2029
Running
R/RP540
Multiscale modelling and dynamic response of LV structures
Pattabhi Ramaiah Budarapu
School of Mechanical Sciences
Research
1/1/2026
31-12-2027
Running
R/RP525
Assimilation of Rainfall Data with NWP from Multi-satellite Merged Rainfall Data: Application towards short-range Weather Prediction of extremes using Machine Learning
Srinivasa Ramanujam Kannan
School of Mechanical Sciences
Research
27-10-2025
26-10-2028
Running
R/RP524
Bird Impact Studies on Multi-Layered Stealth Aircraft Wing Structure
Pattabhi Ramaiah Budarapu
School of Mechanical Sciences
Research
14-10-2025
13-10-2026
Running
R/RP520
Spontaneous Combustion Behavior of Pressurized Hydrogen Leaks
Amrit Bikram Sahu
School of Mechanical Sciences
Research
28-08-2025
27-08-2028
Running
R/RP531
Enhancement of surface properties of biomedical implant materials by Magnetron sputtering coating technique.
Madhusmita Mallick
School of Mechanical Sciences
Seed Grant Project
25-07-2025
24-07-2027
Running
R/RP504
Analysis of CNT and Graphene based coatings for improving antiaging fatigue properties of Fiber-Reinforced Polymer (FRP) composites for Marine Applications
Soumya Ranjan Sahoo
School of Mechanical Sciences
Research
10/7/2025
9/7/2028
Running
R/RP487
Multiphysics simulation-based tool design and experimental analysis of precision electrochemical machining of Inconel718 blades for aerospace applications
Divyansh Patel
School of Mechanical Sciences
Research
13-06-2025
12/6/2028
Running
R/RP516
An investigation on the Sound Generation Mechanism of Indian Traditional Drums and Stringed Instruments
Soumya Ranjan Sahoo
School of Mechanical Sciences
Research
11/6/2025
########
Running
R/RP475
Development of CFD model for combination snout & zinc bath of continuous galvanizing line.
Anirban Bhattacharya
School of Mechanical Sciences
Research
1/5/2025
31-10-2026
Running
R/RP470
Design, Fabrication, and Testing of a Micro sized Modular AUV for Autonomous Deep-Sea Missions
Yogesh Ganpat Bhumkar
School of Mechanical Sciences
Research
1/4/2025
31-03-2027
Running
R/RP454
Study on Targeted Energy Transfer (TET) Through Vibro-Impact Systems
Rahul Kumar
School of Mechanical Sciences
Seed Grant Project
7/2/2025
6/2/2027
Running
R/RP446
Thermal Hydraulic Study for Passive Safety of Small Modular Reactor(SMR) Containment
Maneesh Punetha
School of Mechanical Sciences
Seed Grant Project
2/12/2024
1/12/2026
Running
R/RP448
Innovative Autonomous Observation System for Coastal Ocean Monitoring (AOSCOM)
Yogesh Ganpat Bhumkar
School of Mechanical Sciences
Research
19-11-2024
18-11-2026
Running
R/RP443
Development of test facilities for measurement of tribodynamic performances of new aerodynamic bearings
Manas Ranjan Pattnayak
School of Mechanical Sciences
Seed Grant Project
26-10-2024
25-10-2026
Running
R/RP450
Development of graphene oxide-based antiaging Fiber-reinforced polymer (FRP) composites for underwater applications
Soumya Ranjan Sahoo
School of Mechanical Sciences
Research
18-10-2024
17-10-2026
Running
R/RP427
A mechanistic approach of two-phase heat transfers over porous coated vertical tube and its bundle
Mihir Kumar Das
School of Mechanical Sciences
Research
3/5/2024
2/5/2027
Running
R/RP404
AI-powered tool for autonomous identification of retinal phenotypes as potential biomarkers for Schizophrenia spectrum disorder
Satish Kumar Panda
School of Mechanical Sciences
Research
1/5/2024
30-04-2027
Running
R/RP393
Coolant droplets impact analysis on textured cutting tools to improve the spreadability and lubricant retention
Chetan
School of Mechanical Sciences
Research
23-03-2024
22-03-2027
Running
R/RP392
Design, Development, and Physics of Passive Two Phase Immersion Cooling Module for Thermal Management of PTFE Coated Li-Ion Battery Pack
Mihir Kumar Das
School of Mechanical Sciences
Research
20-03-2024
19-03-2027
Running
R/RP394
To develop the surface protection technology for protecting the metallic material under marine environment
Chetan
School of Mechanical Sciences
Research
1/3/2024
31-10-2026
Running
R/RP378
Design and Development of High Flux Tubes with Lower Onset Wall Superheat in Application to Flooded Evaporator
Mihir Kumar Das
School of Mechanical Sciences
Research
21-02-2024
20-02-2027
Running
R/SP141
Development of electrochemical polishing/micromachining facility for post-processing of additively manufactured biomedical implants
Divyansh Patel
School of Mechanical Sciences
Seed Grant Project
30-01-2024
29-01-2026
Running
R/SP139
Investigation of combustion and heat-transfer characteristics of confined swirling flames
Amrit Bikram Sahu
School of Mechanical Sciences
Seed Grant Project
30-01-2024
29-01-2026
Running
R/RP422
Experimental and kinetic investigations of combustion and emission trends in ammonia hydrogen derived fuels in a swirl burner configuration
Amrit Bikram Sahu
School of Mechanical Sciences
Research
22-01-2024
21-01-2026
Running
R/SP138
Role of Texture and Temperature on the response of Polycrystalline Shape Memory Alloys- A Discrete Particle
Mahendaran Uchimali
School of Mechanical Sciences
Seed Grant Project
9/1/2024
8/1/2026
Running
R/SP135
Analysis of Piezoelectric and magneto-electro-elastic vibrational energy harvesters
Soumya Ranjan Sahoo
School of Mechanical Sciences
Seed Grant Project
5/1/2024
4/10/2026
Running
R/SP136
An Artificial Intelligence Enabled Device for Fundus Imaging and Ocular Disease Detection
Satish Kumar Panda
School of Mechanical Sciences
Seed Grant Project
5/1/2024
4/2/2026
Running
R/SP137
Exploring and establishing technologies to develop high performance Magnesium Multicomponent alloys for automobile application
Suman Deb
School of Mechanical Sciences
Seed Grant Project
5/1/2024
4/2/2026
Running
R/RP351
CHANAKYA Fellowship Program_An AI-powered Software for Angle-Closure Glaucoma Detection from Anterior Segment Optical Coherence Tomography Images
Satish Kumar Panda
School of Mechanical Sciences
Research
31-07-2023
30-07-2024
Completed
R/RP347
Investigations of Spray Cooling systems in non-Boiling Regime using Experimental and Numerical Methods
Sasidhar Kondaraju
School of Mechanical Sciences
Research
9/6/2023
8/6/2026
Running
R/RP342
An Intelligent Vision system for autonomous health monitoring of underwater oil pipelines
Satish Kumar Panda
School of Mechanical Sciences
Research
10/5/2023
31-03-2027
Running
R/RP332
Design and Development of Synthetic Jet Array for Steered and Focused Jet
Venugopal Arumuru
School of Mechanical Sciences
Research
21-02-2023
20-02-2026
Running
R/RP329
An AI-powered fully automated diagnostic software for evidence-based glaucoma detection by identifying structural biomarkers of the optic nerve head
Satish Kumar Panda
School of Mechanical Sciences
Research
10/2/2023
9/2/2025
Completed
R/RP326
Mathematical and Numerical modelling of dropwise condensation on pipes
Sasidhar Kondaraju
School of Mechanical Sciences
Research
1/1/2023
6/1/2026
Running
R/RP308
Analysis and Design of elastodynamic metamaterials for vibro-acoustic control
Satyanarayan Panigrahi
School of Mechanical Sciences
Research
14-03-2022
13-06-2024
Completed
R/RP301
Machine Learning Based Model for Optimization of PCM-Metal Foam Composite Energy Storage System
Anirban Bhattacharya
School of Mechanical Sciences
Research
14-02-2022
13-02-2025
Completed
R/RP296
Investigation on the role of residual stresses on shape memory effect and superelasticity in shape memory alloy welds
Manas Mohan Mahapatra
School of Mechanical Sciences
Research
14-01-2022
13-01-2025
Completed
R/RP297
Design and Development of a Screw type Wheeled Snake-like Robot to Access the inaccessible Areas inside the Boiler Tubes and other Enclosures
Vundavilli Pandu Ranga
School of Mechanical Sciences
Research
6/1/2022
5/1/2024
Completed
R/RP293
Titanium alloy based fine featured Cranial implant development using Incremental Forming and ECM
Gaurav Bartarya
School of Mechanical Sciences
Research
28-12-2021
27-03-2025
Completed
R/RP280
Load distribution, design and joint configurations for Load Grounding through Human Worn Exo-Frames
Vundavilli Pandu Ranga
School of Mechanical Sciences
Research
7/9/2021
6/9/2023
Completed
R/RP278
Indigenous Development of a novel low-cost Solar PV panel self cleaning device
Venugopal Arumuru
School of Mechanical Sciences
Research
30-07-2021
30-09-2025
Completed
R/RP269
Development of in-reflection fiber based interferometer for residual stress measurement
Manas Mohan Mahapatra
School of Mechanical Sciences
Research
31-03-2021
30-03-2025
Completed
R/RP257
Ultrasonic assisted laser additive manufacturing of nickel based super alloys and its online tempreture monitoring to control the directionality in grain growth, anisotropy in mechanical properties and elemental segregation; and enhancement of the component life by laser shock peening.
Suvradip Mullick
School of Mechanical Sciences
Research
30-12-2020
29-12-2023
Completed
R/RP233
Design and development of compact and lightweight jet pumps for aviation application with enhanced efficiency
Venugopal Arumuru
School of Mechanical Sciences
Research
23-09-2020
22-03-2021
Completed
R/SP101
Application of textured tools under cryogenic cooling environment for the machining of difficult to machine material
Chetan
School of Mechanical Sciences
Seed Grant Project
5/9/2020
4/9/2022
Running
R/RP229
Assimilation of Ground Radar Data with Weather Research and Forecast Model in Information Theoretic Framework
Srinivasa Ramanujam Kannan
School of Mechanical Sciences
Research
18-03-2020
17-03-2020
Completed
R/RP223
Development of heat transfer enhancement methods at boiling and evaporation on horizontal tube bundles for falling films and forced flow of liquids
Mihir Kumar Das
School of Mechanical Sciences
Research
24-02-2020
2/8/2022
Completed
R/RP220
Thermal Characterization of gun barrel during dynamic firing
Swarup Kumar Mahapatra
School of Mechanical Sciences
Research
13-02-2020
12/2/2023
Completed
R/RP213
Design and development of lightweight and crashworthy hierarchical materials and structures
Pattabhi Ramaiah Budarapu
School of Mechanical Sciences
Research
28-01-2020
27-01-2022
Completed
R/SP097
Multiphysics analysis of cracked photovoltaic solar cells
Pattabhi Ramaiah Budarapu
School of Mechanical Sciences
Seed Grant Project
20-01-2020
19-01-2022
Completed
R/RP201
Development of a sub-micrometer resolution electro hydrodynamic jet printer for printing customized polymeric structures
Sasidhar Kondaraju
School of Mechanical Sciences
Research
11/6/2019
10/6/2022
Completed
R/RP303
Stability and contact problems of inflatable structures under DST INSPIRE Faculty Fellowship
Soham Roychowdhury
School of Mechanical Sciences
Research
2/4/2019
1/4/2024
Completed
R/RP186
Development of continuous gradient Functionally Graded Materials (FGMs) by using gravity die casting under Teachers Associateship for Research Excellence (TARE)
Manas Mohan Mahapatra
School of Mechanical Sciences
Research
25-03-2019
8/1/2023
Completed
R/RP189
Development of heterodimetallic complexes and their theranostic and catalytic aspects
Vundavilli Pandu Ranga
School of Mechanical Sciences
Research
25-03-2019
24-03-2023
Completed
R/RP182
Development of a three dimensional unsteady, compressible flow solver (based on LES methodology) to optimize shape of a launch vehicle for reducing aerodynamic drag and flow induced acoustic noise at transonic Mach numbers
Yogesh Ganpat Bhumkar
School of Mechanical Sciences
Research
15-03-2019
14-03-2022
Completed
R/SP089
Development of vibration assisted machining setup to address surface integrity issues on hard turned parts
School of Mechanical Sciences
Seed Grant Project
8/2/2019
7/2/2021
Running
R/SP086
Significance of monitoring molten pool thermal history and its influence on evolution of microstructure and mechanical properties in case of Titanium based ceramic metal matrix composite coatings deposited on nickel based super alloys using laser cladding process
Suvradip Mullick
School of Mechanical Sciences
Seed Grant Project
31-10-2018
30-10-2020
Running
R/RP165
Design and Development of Co-axial synthetic jet for electronics cooling
Venugopal Arumuru
School of Mechanical Sciences
Research
15-09-2018
14-09-2021
Completed
R/RP166
Development of metal matrix nano-composites using selective laser melting process
Anirban Bhattacharya
School of Mechanical Sciences
Research
15-09-2018
14-09-2021
Completed
R/RP164
FIST Program
Venugopal Arumuru
School of Mechanical Sciences
Research
1/9/2018
31-08-2024
Completed
R/RP161
Evaluation of residual stress in Alloy 617 boiler tube weld joint and 10Cr Steel/ Alloy 617 dissimilar metal weld joint for welded turbine rotor
Manas Mohan Mahapatra
School of Mechanical Sciences
Research
28-06-2018
31-01-2021
Completed
R/RP158
Investigation on quantification and prevention of high residual stresses and hydrogen assisted cracking in creep strength enhanced ferritic steel welds for low pollution ultra supereritical power plant applications
Manas Mohan Mahapatra
School of Mechanical Sciences
Research
8/3/2018
14-01-2019
Completed
R/RP149
Performance Improvement of Steam Generator through the Enhanced Hydrophobic Surface
Mihir Kumar Das
School of Mechanical Sciences
Research
6/10/2017
31-03-2021
Completed
R/RP137
Droplet impact and splashing on oblique surface
Sasidhar Kondaraju
School of Mechanical Sciences
Research
27-03-2017
26-09-2020
Completed
R/SP080
Development of microstructure predicton model for additive manufacturing using selective laser melting process
Anirban Bhattacharya
School of Mechanical Sciences
Seed Grant Project
8/2/2017
7/2/2019
Running
R/RP117
Study of Wetting and De-Wetting Transition for Fog-Water Harvesting
Sasidhar Kondaraju
School of Mechanical Sciences
Research
23-09-2016
22-09-2021
Completed
R/SP076
Engineering of Droplet Manipultion in Tertiary Junction Microfluidic Channels
Sasidhar Kondaraju
School of Mechanical Sciences
Seed Grant Project
8/9/2016
7/9/2018
Running
R/RP110
Development of Deep Hole Drilling Technique for Measurement of Residual Stresses and its Validation
Manas Mohan Mahapatra
School of Mechanical Sciences
Research
1/9/2016
31-08-2018
Completed
R/RP091
Pool Boiling Crisis on Porous Coated Surface: An Experimental Study and Model Development
Mihir Kumar Das
School of Mechanical Sciences
Research
17-09-2015
11/8/2018
Completed
R/RP087
Development and Analysis of the space-time optimized dispersion relation preserving (DRP) scheme suitable for high performance computing of fluid flows
Yogesh Ganpat Bhumkar
School of Mechanical Sciences
Research
13-08-2015
12/8/2017
Completed
R/RP080
National Initiative for Design Innovation
Arun Kumar Pradhan
School of Mechanical Sciences
Research
4/4/2015
30-09-2026
Running
R/SP071
Estimation of radiation interaction parameters using combined numerical model and observations
Srinivasa Ramanujam Kannan
School of Mechanical Sciences
Seed Grant Project
23-03-2015
22-03-2017
Completed
R/RP076
Design of Optimized Natural Laminar Flow Aerofoil for Transport Aircraft
Yogesh Ganpat Bhumkar
School of Mechanical Sciences
Research
17-12-2014
16-12-2016
Completed
R/SP061
High performance computing of flow past reflex shape aerofoils suitable for micro-aerofoils suitable for micro-aerial vehicles
Yogesh Ganpat Bhumkar
School of Mechanical Sciences
Seed Grant Project
7/5/2014
6/5/2016
Running
R/SP055
Dynamic walking gait generation and path planning of a biped robot using soft computing
Vundavilli Pandu Ranga
School of Mechanical Sciences
Seed Grant Project
4/12/2013
31-12-2013
Completed
R/RP046
Re-Engineering of walking type reaper binder
Mihir Kumar Pandit
School of Mechanical Sciences
Research
17-06-2013
16-06-2015
Completed
R/RP044
Analysis & Design of acoustic absorber linings for underwater application
Satyanarayan Panigrahi
School of Mechanical Sciences
Research
9/1/2013
8/1/2015
Completed
R/RP041
Impact Response and Damage Analysis of Advanced Composite sandwich Structures
Mihir Kumar Pandit
School of Mechanical Sciences
Research
21-12-2012
20-12-2015
Completed
R/SP044
Experimental Vibro – Acoustic modal analysis
Satish Daulatrao Dhandole
School of Mechanical Sciences
Seed Grant Project
17-09-2012
16-09-2014
Running
R/RP030
CFD Modeling of 76mm naval gun projectile motion in Aid of range enhancement
Swarup Kumar Mahapatra
School of Mechanical Sciences
Research
11/4/2012
31-05-2015
Completed
R/SP022
Development of Enhanced Micro and Nano porus surface for re-boiler and evaporators used in petroleum and chemical Industries
Mihir Kumar Das
School of Mechanical Sciences
Seed Grant Project
20-07-2010
31-12-2013
Running
R/SP017
An accurate Assessment of the Beheviour of sandwich Limanates using an Improved Higher orderZigzag plate Model.
Mihir Kumar Pandit
School of Mechanical Sciences
Seed Grant Project
16-07-2010
31-12-2013
Running
R/SP018
Adhesion failure and delaminationdamage analysis of bonded joints in shells and panels made with laminated FRP composites and Functionally Graded Material(FGM)
Arun Kumar Pradhan
School of Mechanical Sciences
Seed Grant Project
16-07-2010
31-12-2013
Running
R/RP002
Simulation of conjugate heat transfer Phenomena in Ultra- short laser tissue interaction
Swarup Kumar Mahapatra
School of Mechanical Sciences
Research
5/8/2008
4/8/2011
Completed
Consultancy
Sl. No
User Project Code
Title
PI Name
School/Dept.
Project Type
Start Date
End Date
Status
1
C/CP1368
Design and Development of an Efficient Pneumatic Powder Conveying System
Venugopal Arumuru
School of Mechanical Sciences
Consultancy
10-07-2026
09-09-2026
Running
2
C/CP1348
Design & Development of Automated Shear Box Cell Instrument for Flow Characterisation
Venugopal Arumuru
School of Mechanical Sciences
Consultancy
22-06-2026
31-08-2026
Running
3
C/CP785
Single Phase Heat Transfer Enhancement
Mihir Kumar Das
School of Mechanical Sciences
Consultancy
18-10-2024
30-04-2026
Running
4
C/CP775
Development of radial gas foil bearings for DET400 400N-class micro gas turbine engine
Manas Ranjan Pattnayak
School of Mechanical Sciences
Consultancy
01-10-2024
31-01-2025
Completed
5
C/CP674
Development of a predictive model for a competition
Manas Mohan Mahapatra
School of Mechanical Sciences
Consultancy
30-04-2024
29-04-2025
Completed
6
C/CP520
Inspection and testing of welding of steel plate girders at site (Patna, Bihar) and fabrication yard (Rewari, Haryana)
Manas Mohan Mahapatra
School of Mechanical Sciences
Consultancy
25-10-2023
24-04-2024
Completed
7
C/CP473
Fitness monitoring system & pro dignostics of LURO BURNER
Venugopal Arumuru
School of Mechanical Sciences
Consultancy
18-07-2023
17-01-2024
Completed
8
C/CP426
Residual stress measurement in welded pipes and plates
Manas Mohan Mahapatra
School of Mechanical Sciences
Consultancy
27-03-2023
26-10-2023
Completed
9
C/CP411
Development of Drone System for Cleaning High Rise Buildings & for spraying Pesticides
Yogesh Ganpat Bhumkar
School of Mechanical Sciences
Consultancy
22-01-2023
21-01-2024
Completed
10
C/CP358
Design Review for Multi variable Industrial Sensor
Venugopal Arumuru
School of Mechanical Sciences
Consultancy
08-07-2022
16-09-2022
Completed
11
C/CP340
Determination and Analysis of Residual Stress in Aero Engine Compressor Rotor
Manas Mohan Mahapatra
School of Mechanical Sciences
Consultancy
21-04-2022
20-04-2023
Completed
12
C/CP328
Technical viability of use of Raw Petroleum coke in Manufacturing of ECP/Soderberg Paste
Vundavilli Pandu Ranga
School of Mechanical Sciences
Consultancy
08-03-2022
12-03-2022
Completed
13
C/CP228
Residual Stress Measurement on Rotor Surface at various Locations (Base Metal & Weld) & Modelling of Rotor Weldment-For AUSC Projects
Manas Mohan Mahapatra
School of Mechanical Sciences
Consultancy
24-08-2020
23-11-2020
Completed
14
C/CP218
Mathematical modelling for parameter estimation and vibration analysis
Srinivasa Ramanujam Kannan
School of Mechanical Sciences
Consultancy
16-06-2020
15-12-2020
Completed
15
C/CP185
Design and development of Flow measurement Solution
Venugopal Arumuru
School of Mechanical Sciences
Consultancy
18-09-2019
17-09-2020
Completed
16
C/CP186
Coriolis flowmeter study
Venugopal Arumuru
School of Mechanical Sciences
Consultancy
08-09-2019
17-09-2020
Completed
17
C/CP216
Design and development of gaseous Oxygen heat exchanger for semi-cryogenic stage
Prasenjit Rath
School of Mechanical Sciences
Consultancy
03-05-2019
02-04-2020
Completed
18
C/CP170
Residual stress measurement by Deep-hole drilling technique
Manas Mohan Mahapatra
School of Mechanical Sciences
Consultancy
20-03-2019
19-03-2020
Completed
19
C/CP169
Development of FEM model for Design Improvement of multi layered Baffle
Satyanarayan Panigrahi
School of Mechanical Sciences
Consultancy
12-03-2019
11-03-2020
Completed
20
C/CP139
Vetting / proof checking of modification of boiler registration No-OR-1537 and OR-1539
Swarup Kumar Mahapatra
School of Mechanical Sciences
Consultancy
10-07-2018
21-08-2018
Completed
21
C/CP136
Design of compact/ miniature ultrasonic transducer
Venugopal Arumuru
School of Mechanical Sciences
Consultancy
13-06-2018
12-08-2018
Completed
22
C/CP114
Residual stress measurement in unrestrained and restrained double “V” joints
Manas Mohan Mahapatra
School of Mechanical Sciences
Consultancy
03-08-2017
30-11-2017
Completed
23
C/CP102
Vetting/ Proof checking of refrigeration for 3000 MT and 5000 MT
Swarup Kumar Mahapatra
School of Mechanical Sciences
Consultancy
06-04-2017
27-04-2017
Completed
24
C/CP067
Endorsement of the estimation of production quantities of sponge iron and steel billets of Maa Mahamaya Industries Ltd, R.G. Peta in the years 2006-07, 2007-08 and 2008-09 from the charge mix used
Vundavilli Pandu Ranga
School of Mechanical Sciences
Consultancy
07-07-2016
14-07-2016
Completed
25
C/CP059
Inspection of quality control laboratory
Vundavilli Pandu Ranga
School of Mechanical Sciences
Consultancy
06-05-2016
13-05-2016
Completed
26
C/CP035
Survey of capacity assessment of Amritesh Industries Pvt. Ltd.
